R00 标准化、质量管理 标准查询与下载

AASHTO R 8-1996 运输相关土地产生的振动评价的标准规范

This recommended practice is to provide guidance for the assessment of potential or alleged structural damage due to earthborne vibrations related to transportation facility construction, maintenance, or operation.

Standard Practice for Evaluation of Transportation-Related Earthborne Vibrations

AASHTO R 21-1996 打钻以勘察路基非预期可疑危害材料的标准推荐规程

This practice is intended to help protect drillers in the event they unexpectedly encounter suspected hazardous materials while performing subsurface investigations. This is accomplished by training the drillers, identifying precautions to minimize risk

Standard Practice for Drilling for Subsurface Investigations桿nexpectedly Encountering Suspected Hazardous Material

AASHTO M 286-1996 铺砌路面防滑试验用标准光滑轮胎的标准规范

1.1. This specification covers the general requirements for the smooth-tread standard tire for pavement testing. The tire covered by this specification is intended for evaluation of tire-pavement friction.

Standard Specification for Smooth-Tread Standard Tire for Special-Purpose Pavement Frictional-Property Tests

AASHTO T 290-1995 水溶性硫酸根离子含量测定的标准测试方法

4.1. This method covers the dry preparation of soil and soil-aggregate samples, as received from the field, for use in determining the sulfate ion content in soils.

Standard Method of Test for Determining Water-Soluble Sulfate Ion Content in Soil

AASHTO BRH-2-1995 公路材料研究组13分技术委员会报告标准化公路障碍硬件指南

This document, A Guide to Standardized Highway Barrier Hardware, is disseminated upon the sponsorship of the Joint Committee of the American Association of State Highway and Transportation Officials, the Associated General Contractors of America and the A

Subcommittee on New Highway Materials Task Force 13 Report a Guide to Standardized Highway Barrier Hardware

AASHTO T 241-1995 不断地焊接接缝波状钢管的标准测试方法

This method describes the procedure to be used in determining the quality of the seam or helical, continuously welded seam, corrugated steel pipe. The procedure to be used involves distorting a short length of welded seam by using a 25-mm diameter, hem

Standard Method of Test for Helical Continuously Welded Seam Corrugated Steel Pipe

AASHTO T 297-1994 软粘土的松散,不排水压缩测试的标准测试方法

AASHTO T 297-94 (2004) is identical to ASTM D 4767-88∈1* except that all references to the ASTM standards contained in ASTM D 4767-88∈1*, listed in the following table, shall be replaced with the corresponding AASHTO standard:

Standard Method of Test for Consolidated, Undrained Triaxial Compression Test on Cohesive Soils

AASHTO T 291-1994 水溶性氯离子含量测定的标准测试方法

This test method describes the procedures for sampling and testing a soil for chloride ion content.

Standard Method of Test for Determining Water-Soluble Chloride Ion Content in Soil

AASHTO T 299-1993 混凝土中碱硅酸反应产物的快速鉴定的标准测试方法

This test involves hazardous materials, operations, and equipment. It does not purport to address all of the safety problems with its use. It is the responsibility of the user of this test to consult and establish appropriate safety and health practices

Standard Method of Test for Rapid Identification of Alkali-Silica Reaction Products in Concrete

AASHTO M 81-1992 稀释沥青的标准规范(快速固化型)

Standard Specification for Cut-Back Asphalt (Rapid-Curing Type)

Standard Specification for Cutback Asphalt (Rapid-Curing Type)

AASHTO TF-31-1992 高速材料研究组委员会 报告31 聚合体修正的规范指南

The American Association of State Highway and Transportation officials, the Associated General Contractors, and the American Road and Transportation Builders Association formed a working relationship called the AASHTO-AGCARTBA

Subcommittee on New Highway Materials Task Force 31 Report Guide Specifications Polymer Modified Asphalt

AASHTO T 85-1991 粗集料的密度、比重和吸收性的标准试验方法

This method covers the determination of specific gravity and absorption of coarse aggregate. The specific gravity may be expressed as bulk specific gravity, bulk specific gravity (saturatedsurface- dry (SSD)), or apparent specific gravity. The bulk spec

Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate

AASHTO T 288-1991 最低化验土壤电阻率测定的标准测试方法

This test method covers the laboratory determination for the minimum resistivity of a soil.

Standard Method of Test for Determining Minimum Laboratory Soil Resistivity

AASHTO T 289-1991 侵蚀测验中土壤PH值测定的标准测试方法

Standard Method of Test for Determining pH of Soil for Use in Corrosion Testing

Standard Method of Test for Determining pH of Soil for Use in Corrosion Testing

AASHTO EAST-1991 1990欧洲沥青研究之旅的报告

Federal Highway Administrator For the average motorist, one question about highways is of top priority: is the pavement smooth? Dating back to the 19703, the answer to that question has, unfortunately, often been "no."

Report on the 1990 European Asphalt Study Tour Revision 1

AASHTO M 145-1991 公路施工用土壤和土壤骨料混合物分类的标准规范

This recommended practice describes a procedure for classifying soils into seven groups based on laboratory determination of particle-size distribution, liquid limit, and plasticity index. Evaluation

Standard Specification for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes

AASHTO M 289-1991 玻纹钢管用铝锌合金钢板的标准规范

This specification covers sheet steel for corrugated steel pipe, which is coated with a 55 percent aluminum-zinc alloy on continuous lines by the hot-dip process. The material is furnished in coils, in flat cut lengths, and corrugated cut lengths. The s

Standard Specification for Aluminum-Zinc Alloy Coated Sheet Steel for Corrugated Steel Pipe

AASHTO M 314-1990 钢锚栓的标准规范

This specification covers externally threaded steel anchor bolts intended for anchoring structural supports to concrete foundations. Such structural supports include building columns; column supports for highway signs, street lighting, and traffic signa

Standard Specification for Steel Anchor Bolts

AASHTO TF-28-1990 新高速材料研究组委员会 报告28 规格指南

The technology f o r s t a b i l i z i n g aggregate with lime or cement i n conjunction with f l y ash has been growing s i g n i f i c a n t l y f o r the l a s t 30 years. Increasing energy and labor costs and depletion of high-auality

Subcommittee on New Highway Materials Task Force 28 Report Guidelines and Guide Specifications for"Using Pozzolanic Stabilized Mixture (Base Course or Subbase) and Fly Ash for In-Place Subgrade Soil Modification"

AASHTO T 221-1990 用于评估和设计机场和公路的土壤和柔性路面组件重复静载荷试验的标准方法

This test method covers a procedure for making repetitive static plate load tests on subgrade soils and compacted pavement components, in either the compacted condition or the natural state, and is to provide data for use in the evaluation and design of

Standard Method of Test for Repetitive Static Plate Load Tests of Soils and Flexible Pavement Components for Use in Evaluation and Design of Airport and Highway Pavements