R00 标准化、质量管理 标准查询与下载

AASHTO NTCIP 2302-2001 智能交通系统协议的国家运输交流标准三方文件传输协议

This publication was prepared by the NTCIP Profiles Working Group, which is a subdivision of the Joint Committee on the NTCIP. The Joint Committee is organized under a Memorandum of Understanding among the American Association of State Highway and Trans

National Transportation Communications for ITS Protocol Trivial File Transfer Protocol Application Profile v01.06; A Joint Standard of AASHTO, ITE, and NEMA

AASHTO M 273-2000 小于2英尺受公路载荷的涵洞、雨水管和污水管道用预制钢筋混凝土箱形部件的标准规范(米制)

This specification covers single-cell, precast reinforced concrete box sections with less than 2 ft ofcover subjected to highway loadings and intended to be used for the construction of culverts and for the conveyance of storm water, industrial wastes, a

Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers with Less Than 2 ft of Cover Subjected to Highway Loadings

AASHTO R 15-2000 沥青添加剂和改性剂标准推荐规范

This standard recommended practice covers the laboratory testing required to evaluate asphalt additives and modifiers in both neat asphalt and in asphalt-aggregate hot mixtures. The terms “additive” and “modifier” are used interchangeably and are broadl

Standard Practice for Asphalt Additives and Modifiers

AASHTO TP 60-2000 液压水泥混凝土的热膨胀系数的标准试验方法

This test method covers determination of the coefficient of thermal expansion (CTE) of hydraulic cement concrete cores or cylinders. Since it is known that the degree of saturation of concrete influences its measured coefficient of thermal expansion, t

Standard Method of Test for Coefficient of Thermal Expansion of Hydraulic Cement Concrete

AASHTO T 303-2000 由于碱硅酸反应的潜在有害砂浆膨胀加快检测的标准测试方法

This test method allows detection within 16 days of the potential for deleterious expansion of mortar bars due to the alkali-silica reaction.

Standard Method of Test for Accelerated Detection of Potentially Deleterious Expansion of Mortar Bars Due to Alkali-Silica Reaction

AASHTO GSID-2000 隔震设计规范指南

These guidelines are written as supplemental to the AASHTO Standard Specifications for Highway Bridges, 16th Edition, Division I-A: Seismic Design and incorporate the generic requirements for seismic isolation design.Isolating structures from the damaging

Guide Specifications for Seismic Isolation Design Revision 2; 2000 Interim Revision

AASHTO T 300-2000 沥青材料的可延展性压力测试的标准测试方法

The force ductility of an asphalt material is determined by measuring the tensile stress induced on a specimen when two ends of a briquet specimen of the material, are pulled apart at 5 cm/min.

Standard Method of Test for Force Ductility Test of Asphalt Materials

AASHTO T 311-2000 土壤颗粒材料的粒度分析的标准试验方法

This method covers the determination of the particle size distribution of granular soil material. This method utilizes the 6.3-mm sieve size for separation purposes. However, the sample tester may use an alternative sieve size (i.e., 4.75 mm, 2.00 mm, e

Standard Method of Test for Grain-Size Analysis of Granular Soil Materials

AASHTO T 84-2000 细集料的密度、比重和吸收性的标准试验方法

This method determines (after 15 hours in water) the bulk specific gravity and the apparent specific gravity as defined in M 132, the bulk specific gravity on the basis of mass of saturated surface-dry aggregate, and the absorption as defined in M 132.

Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate

AASHTO T 255-2000 总水分含量干燥的标准测试方法

This test method covers the determination of the percentage of evaporable moisture in a sample of aggregate by drying both surface moisture and moisture in the pores of the aggregate.

Standard Method of Test for Total Evaporable Moisture Content of Aggregate by Drying

AASHTO M 273M-2000 小于0.6 英尺受公路载荷的涵洞、雨水管和污水管道用预制钢筋混凝土箱形部件的标准规范(米制)

This specification covers single-cell, precast reinforced concrete box sections with less than 0.6 m of cover subjected to highway loadings and intended to be used for the construction of culverts and for the conveyance of storm water, industrial wastes

Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers with Less Than 0.6 m of Cover Subjected to Highway Loadings [Metric]

AASHTO NTCIP 1404-2000 智能交通系统协议的国家运输交流标准

The scheduling domain covers the data needs of the functions related to scheduling and runcutting.

Transit Communications Interface Profiles part of the National Transportation Communications for ITS Protocol Standard on Scheduling / Runcutting (SCH) Objects v01.02; Joint Standard of AASHTO, ITE, and NEMA; Also referenced as TCIP-SCH; Spring 2001 prin

AASHTO NTCIP 1405-2000 智能交通系统协议的国家运输交流标准

Among the APTS data interchange needs is the ability to transfer information about the location of transit

Transit Communications Interface Profiles part of the National Transportation Communications for ITS Protocol Standard on Spatial Representation (SP) Objects v01.02; Joint Standard of AASHTO, ITE, and NEMA; Also referenced as TCIP-SP; Spring 2001 printin

AASHTO NTCIP 1406-2000 智能交通系统协议的国家运输交流标准

The on-board domain covers the data needs of the functions related to on-board applications. This includes all data needed for the communications between on-board components within a public transportation vehicle and other transit applications. The data

Transit Communications Interface Profiles part of the National Transportation Communications for ITS Protocol Standard on On-Board (OB) Objects v01.02; A Joint Standard of AASHTO, ITE, and NEMA; Also referenced as TCIP-OB

AASHTO NTCIP 1407-2000 智能交通系统协议的国家运输交流标准

The control center domain covers the data needs of the functions related to control center applications.

Transit Communications Interface Profiles part of the National Transportation Communications for ITS Protocol Standard on Control Center (CC) Objects v01.02; A Joint Standard of AASHTO, ITE, and NEMA; Also referenced as TCIP-CC

AASHTO NTCIP 1401-2000 关于公共运输(CPT)目标智能交通系统协议的国家运输交流标准转换交流界面

This document defines the common public transportation data elements and messages that are used by other business areas of the Transit Communications Interface Profiles (TCIP). This document and the

Transit Communications Interface Profiles part of the National Transportation Communications for ITS Protocol Standard on Common Public Transportation (CPT) Objects v01.02; A Joint Stanard of AASHTO, ITE, and NEMA; Also referenced as TCIP-CPT

AASHTO NTCIP 1402-2000 关于事件管理目标智能交通系统协议的国家运输交流标准转换交流界面

The incident management domain covers the data needs related to detecting, verifying, prioritizing, responding to, and clearing unplanned events (i.e., accidents, weather conditions, crimes, etc.) that affect transit operations. These include all data

Transit Communications Interface Profiles part of the National Transportation Communications for ITS Protocol Standard on Incident Management (IM) Objects v01.02; Joint Standard of AASHTO, ITE, and NEMA; Also referenced as TCIP-IM; Spring 2001 printing

AASHTO NTCIP 1403-2000 关于乘客目标智能交通系统协议的国家运输交流标准转换交流界面

The passenger information domain covers the data needs related to providing passengers and potential passengers with the information for planning and making trips using public transportation services. This

Transit Communications Interface Profiles part of the National Transportation Communications for ITS Protocol Standard on Passenger Information (PI) Objects v01.02; Joint Standard of AASHTO, ITE, and NEMA; Also referenced as TCIP-PI; Spring 2001 printing

JT/T 408-1999 水路货物运输质量考核指标和统计要求

本标准规定了水路货物运输质量考核指标和统计要求。 本标准适用于从事营业性内、外贸货物运输及相关的港口装卸、储存、驳运等作业的企业、单位和个体联户。

Check indexes and statistics requests of carrying quality for freight bu water

AASHTO T 307-1999 土壤和总结材料的弹性模量的测定的标准试验方法

This method covers procedures for preparing and testing untreated subgrade soils and untreated base/subbase materials for determination of resilient modulus (Mr) under conditions representing a simulation of the physical conditions and stress states of

Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials