R10 公路运输综合 标准查询与下载
共找到 229 条与 公路运输综合 相关的标准，共 16 页
This European Standard specifies the requirements for laboratory tests (production control) and qualification procedures for the premixed glass beads used in road marking materials. The requirements taken into consideration in this standard are: —granulometry; —refractive index of the glass; —chemical resistance; —quality; —surface treatments. This European Standard does not cover the glass beads used as a filler in marking products.
Road marking materials - Premix glass beads
- ICS
- 93.080.20
- CCS
- R10
- 发布
- 1998-01-15
- 实施
- 1998-01-15
This European Standard specifies the requirements for laboratory tests (production control) and qualification procedures for the following drop on materials used in road markings. These materials are dropped on to paints, thermoplastics, cold plastics and any other marking product applied in a liquid state, immediately after application to the road surface. The requirements taken into consideration in this standard are: - glass beads: granulometry, refractive index of the glass, chemical resistance, quality, surface treatments; - antiskid aggregates: granulometry, chemical characteristics, friability, colour, - mixtures of glass beads and antiskid aggregates; and the requirements for both components.
Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two
- ICS
- 93.080.20
- CCS
- R10
- 发布
- 1998-01-15
- 实施
- 1998-01-15
This standard specifies the performance for road users of white and yellow road markings, as expressed by their reflection in daylight and under road lighting, retroreflection in vehicle headlamp illumination, colour and skid resistance.
Road marking materials - Road marking performance for road users
- ICS
- 93.080.30
- CCS
- R10
- 发布
- 1998-01-15
- 实施
- 1998-01-15
This European Standard specifies the initial performance requirements and laboratory test methods for retroreflecting road studs intended for use as permanent and temporary road marking materials.
Road marking materials - Retroreflecting road studs - Initial performance requirements
- ICS
- 93.080.20
- CCS
- R10
- 发布
- 1998-01-15
- 实施
- 1998-01-15
This is the eighth edition of the AASHTO Guide SpeciJications for Highway Construction. In 1962 the Subcommittee on Construction was directed to make a complete review of all of the State Highway Department construction specifications for construction oth
Guide Specifications for Highway Construction Eighth Edition
- ICS
- 43.080.01
- CCS
- R10
- 发布
- 1998-01-01
- 实施
Standard Specification for White and Yellow Reflective Thermoplastic Striping Material (Solid Form)
Standard Specification for White and Yellow Reflective Thermoplastic Striping Material (Solid Form)
- ICS
- 43.080.01
- CCS
- R10
- 发布
- 1998-01-01
- 实施
This method covers determination of the density of hydraulic cement. Its particular usefulness is in connection with the design and control of concrete mixtures
Standard Method of Test for Density of Hydraulic Cement
- ICS
- 43.080.01
- CCS
- R10
- 发布
- 1998-01-01
- 实施
Specifies requirements for design, physical dimensions, quality of materials and functional performance.
Vehicle parking control equipment - Specification for parking discs
- ICS
- 93.080.30
- CCS
- R10
- 发布
- 1997-10-15
- 实施
- 1997-10-15
本标准规定了汽车喷烤漆房(以下简称漆房)的术语、产品分类与命名、技术要求、试验方法、检验规则以及标志、包装、运输和贮存等。 本标准活用于汽车维修作业用的漆房。汽车制造行业用的漆房可参照执行。
General requirements for automobile spray booth
- ICS
- CCS
- R10
- 发布
- 1997-05-15
- 实施
- 1997-10-01
本标准规定了汽车客运站收费信息分类及代码。适用于汽车客运站(场、点)收费及信息管理。??
Information classification and codes for rate structure of motor transportation.bus terminal charges
- ICS
- CCS
- R10
- 发布
- 1997-03-04
- 实施
- 2005-09-21
本标准规定了汽车货运站收费分类及代码。适用于汽车货运站收费及信息管理。
Information classification and codes for rate structure of motor transportation.freight terminal charges
- ICS
- CCS
- R10
- 发布
- 1997-03-04
- 实施
- 2005-09-21
本标准规定了汽车节能产品使用必须具备的技术条件。本标准适用于各类汽车节能产品。
Technical specification of automobile fuel saving products
- ICS
- CCS
- R10
- 发布
- 1997-03-04
- 实施
- 1997-08-01
A cross the U.S., public and private interests are building new communications networks on an unprecedented scale. In the public sector, for example, state and local transportation
Guidance on Sharing Freeway and Highway Rights-Of-Way for Telecommunications
- ICS
- 43.080.01
- CCS
- R10
- 发布
- 1997-01-03
- 实施
1.1. This method covers the determination of compressive strength of concrete, using portions of beams broken in flexure for test specimens.
Standard Method of Test for Compressive Strength of Concrete Using Portions of Beams Broken in Flexure
- ICS
- 43.080.01
- CCS
- R10
- 发布
- 1997-01-01
- 实施
This specification covers hot-wrought merchant quality carbon steel bars and bar size shapes produced to mechanical property requirements and intended for noncritical constructional applications. (See Section 3.2.)
Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
- ICS
- 43.080.01
- CCS
- R10
- 发布
- 1997-01-01
- 实施
This recommended practice is to provide guidance in the use and application of statistical
Standard Recommended Practice for Statistical Procedures
- ICS
- 43.080.01
- CCS
- R10
- 发布
- 1997-01-01
- 实施
21st Century Asset Management
21st Century Asset Management
- ICS
- 43.080.01
- CCS
- R10
- 发布
- 1997-01-01
- 实施
本标准规定了汽车轮胎的拆装、使用、维护、修补、翻新、储存等技术要求. 本标准适用于载货汽车和客车轮胎的使用与维修。
The specification for using and maintaining motor vehicle tires
- ICS
- CCS
- R10
- 发布
- 1996-12-02
- 实施
- 1997-03-01
In calculating bending moments in longitudinal beams or stringers, no longitudinal distribution of the In view of the complexity of the theoretical analysis involved in the distribution of wheel loads to stringers, the empirical method herein described is
Guide Specifications for Distribution of Loads for Highway Bridges
- ICS
- 43.080.01
- CCS
- R10
- 发布
- 1994-01-01
- 实施
