R10 公路运输综合 标准查询与下载

DB63/T 1718-2018 高速公路不停车电子收费系统（ETC）车道建设技术规范

Technical Specifications for Lane Construction of Non-stop Electronic Toll Collection System (ETC) on Expressway

DB63/T 1719-2018 高速公路收费车道通用外围设备接口技术要求

Interface technical requirements for general peripheral equipment of expressway toll lanes

DB63/T 1721-2018 高速公路机电工程运维管理要求

Operation and maintenance management requirements for expressway mechanical and electrical engineering

DB31/T 1120-2018 城市地下道路交通标志和标线设置规范

本标准规定了城市地下道路交通标志和标线的基本规定、交通标志设置要求，交通标线设置要求及交通标志和标线协调设置要求。 本标准适用于新建或改建的城市地下道路交通标志和标线的设置，适用于地下道路内部交通标志和标线外，以及出入洞口区域、以及与地下道路相连接区域周边地面道路的入口预告标志等交通标志和标线。

Specifications for the setting of traffic signs and markings on urban underground roads

DB36/T 699-2018 高速公路收费所站管理用房设计规范

Specifications for the design of the management room of expressway toll stations

WB/T 1034-2018 乘用车仓储服务规范

Passenger car warehousing service specifications

DB34/T 3050-2017 重点时段道路运输保障工作指南

本标准规定了重点时段道路运输保障相关工作的基本要求，包括运输组织、安全监管、应急保障、 执法监督、优质服务、行业宣传、带班值守、信息分析等。 本标准适用于安徽省境内道路运输管理机构（以下简称运管机构）和道路旅客运输、道路货物运输、 道路运输场站、城市公交、出租汽车、公路服务区等运输服务企业（以下简称运输服务企业）在重点时 段开展的道路运输保障工作。

Guidelines for road transport security work during key periods

DB36/T 993-2017 机动车维修行业管理信息系统技术规范

Technical specification for management information system of motor vehicle maintenance industry

DB36/T 698-2017 高速公路服务区设计规范

Code for design of expressway service area

WB/T 1069-2017 乘用车运输服务通用规范

General specifications for passenger vehicle transportation services

DB33/T 2047-2017 高速公路视频监控系统联网技术要求

Networking technical requirements for highway video surveillance systems

DB53/T 827.1-2017 山区高速公路建设技术指南 第1部分：滇东北

Technical Guide for Mountain Expressway Construction Part 1: Northeast Yunnan

DB32/T 3216-2017 机动车驾驶员培训机构服务规范

本标准规定了机动车驾驶员培训机构培训服务的总则、工作人员管理、教学与服务设施设备使用管理、信息公开与信息化服务、岗位服务、服务礼仪、教学安全保障、投诉处理及服务质量评价等要求。 本标准适用于江苏省内的机动车驾驶员培训机构。

Service specification for motor vehicle driver training institutions

DB32/T 3215-2017 机动车驾驶培训先培后付服务规范

本标准规定了机动车驾驶培训先培训后付费服务的基本要求、合同管理、学驾服务、信息化服务、教学质量控制、培训纠纷和投诉处理等要求。 本标准适用于为学员提供先培训后付费服务的机动车驾驶员培训机构。

Motor vehicle driving training training first, pay later service specification

JT/T 1134-2017 道路客货运输驾驶员行车操作规范

本标准规定了道路客货运输驾驶员行车操作的一般要求，以及出车前准备、行车中安全驾驶操作、应急处置、交通事故现场处置和车辆回场后检查的相关要求。 本标准适用于驾驶汽油发动机和柴油发动机车辆的道路客货运输驾驶员的安全行车，驾驶上述两类发动机车辆的道路危险货物运输驾驶员可参照使用。

Driving specifications for road passenger and freight transport driver

JT/T 1099-2016 机动车驾驶员培训机构培训服务规范

本标准规定了机动车驾驶员培训机构培训服务的总体要求、设施设备要求、服务要求、服务礼仪要求、教学安全保障要求、投诉受理与满意度回访要求等。 本标准适用于一级、二级和三级民用机动车驾驶员培训机构，大型客货车驾驶员职业教育试点院校在开展大型客货车驾驶员驾驶技能培训时可参照使用。 本标准不适用于拖拉机驾驶员培训机构。

Training service specifications for vehicle drivers training organization

DB12/T 672-2016 机动车维修从业人员从业资格条件

本标准适用于机动车维修从业人员的资格审核以及任职条件的管理，也适用于获准在我国境内从事机动车维修业的其他国籍人员

Qualifications for Motor Vehicle Maintenance Practitioners

EN 16796-1:2016 工业卡车的能源效率-试验方法-第1部分:一般

This European Standard specifies general test criteria and requirements to measure the energy consumption for self-propelled industrial trucks (hereafter referred to as trucks) during operation. For electric trucks, the efficiency of the battery and the battery charger is included. This part of the EN 16796 series is intended to be used in conjunction with the corresponding EN 16796-2 to -5. The truck specific requirements in EN 16796-2 to -5 take precedence over the respective requirements of EN 16796-1. Of the product life cycle, EN 16796 is applicable to the in-use phase. It applies to the following truck types according to ISO 5053-1:- counterbalance lift truck; - articulated counterbalance lift truck; - lorry-mounted truck; - reach truck (with retractable mast or fork arm carriage); - straddle truck; - pallet-stacking truck; - pallet truck; - platform and stillage truck; - pallet truck end controlled; - order-picking truck; - centre-controlled order-picking truck; - towing, pushing tractor and burden carrier; - towing and stacking tractor; - side-loading truck (one side only); - rough-terrain truck; - rough-terrain variable-reach truck; - slewing rough-terrain variable-reach truck; - variable-reach container handler; - counterbalance container handler; - lateral-stacking truck (both sides); - lateral-stacking truck (three sides); - non-stacking low-lift straddle carrier; - multi-directional lift truck.

Energy efficiency of Industrial trucks - Test methods - Part 1: General

EN 16796-3:2016 工业卡车的能源效率 测试方法 第3部分：集装箱搬运叉车

This European Standard specifies the method of energy consumption measurement for container handling lift trucks, as defined in ISO 5053-1. This part is intended to be used in conjunction with EN 16796-1.

Energy efficiency of Industrial trucks - Test methods - Part 3: Container handling lift trucks

EN 16796-2:2016 工业卡车的能源效率-试验方法-第2部分:操作员控制的自走式卡车,牵引拖拉机和载重量卡车

This European Standard specifies the method of energy consumption measurement for the following types of industrial trucks as defined in ISO 5053-1: counterbalance lift truck; articulated counterbalance lift truck; lorry-mounted truck; reach truck (with retractable mast or fork arm carriage); straddle truck; pallet-stacking truck; pallet truck; platform and stillage truck; pallet truck end controlled; order-picking truck; centre-controlled order-picking truck; towing, pushing tractor and burden carrier; towing and stacking tractor; side-loading truck (one side only); lateral-stacking truck (both sides); lateral-stacking truck (three sides); non-stacking low-lift straddle carrier; multi-directional lift truck. This part is intended to be used in conjunction with EN 16796-1.

Energy efficiency of Industrial trucks - Test methods - Part 2: Operator controlled self-propelled trucks@ towing tractors and burden-carrier trucks