R55 潜水装备 标准查询与下载

JT/T 207-2008 69-Ⅲ型轻潜水装具

本标准规定了69-III型轻潜水装具（以下简称潜水装具）的主要参数、装具组成、技术要求、试验方法、检验规则、标志、包装、运输和储存。 本标准适用于以压缩空气为介质的开放式潜水装具。

Self-contained underwater breathing apparatus model 69-III

JT/T 208-2008 6071HY型氦氧重潜水装具

本标准规定了6071 HY型氦氧重潜水装具（以下简称潜水装具）的主要参数、装具组成、制造及材料、技术要求及试验方法、检验规则、标志、包装、运输和储存。 本标准适用于以人工配制的氦氧混合气为呼吸介质的引射再生式和开放式两种循环的潜水装具。

Helium-Oxygen diving equipment model 6071 HY

JT/T 205-2008 通风式潜水装具

本标准规定了通风式潜水装具的类型和结构、工作环境条件、技术要求、试验方法、检验规则及标志、包装、运输、储存的要求。 本标准适用于通风式潜水装具的设计和制造。

Hose diving apparatus

DIN EN 15333-1:2008 呼吸装置 压缩气体驱动装置用开路脐带式电缆 第1部分 需氧量供应装置

This European Standard specifies minimum requirements for demand surface supplied and demand surface oriented diving apparatus to ensure a minimum level of safe operation of the apparatus. It applies to the following: -- depths between 0 m and 50 m for apparatus using air, oxygen or oxygen in nitrogen mixtures; -- depths between 0 m and 60 m for apparatus using oxygen, oxygen and helium or oxygen, nitrogen and helium gas mixtures; -- water temperatures between 4 ℃ and 34 ℃ or outside these temperatures as specified by the manufacturer. The requirements of this European Standard are intended to take account of the interaction between the wearer, the apparatus, and where possible the environment in which the apparatus is likely to be used. This European Standard does not cover saturation diving systems, mini bell systems or apparatus used for oxygen decompression only.

Respiratory equipment - Open-circuit umbilical supplied compressed gas diving apparatus - Part 1: Demand apparatus; English version of DIN EN 15333-1:2008-04

UL 1197-2007 潜水服

These requirements cover immersion suits intended for United States Coast Guard (USCG) approval under 46 CFR 160.171. The suits covered by these requirements are intended to reduce the occurrence of shock to the wearer upon entering cold water and retard the onset of hypothermia (reduce the rate of body heat loss during periods of immersion in water). Immersion suits are required by the USCG to provide thermal protection properties in accordance with USCG regulations [see Thermal Protection Test, Section 22 in this standard and 46 CFR 160.171-17(d)]. These requirements cover immersion suits that incorporate auxiliary, inflatable means to provide buoyancy as well as suits that rely only on inherently buoyant material to provide the required flotation characteristics

UL Standard for Safety Immersion Suits Third Edition

GJB 5917-2007 氦氧潜水技术保障要求

本标准规定了 60m～120m 氮氧常规潜水的减压程序、医学技术与保障要求和安全规则，还规定了深潜系统设备和水下作业装具、装备的配置要求。 本标准适用于氮氧常规潜水作业、模拟潜水实验与潜水训练。

Requirements of technical security for helium-oxygen diving

BS 8478:2006 呼吸保护装置.潜水用呼吸气体和施压供养设施

This British Standard specifies requirements and test methods for the composition and purity of breathing gases, other than compressed air, for use in diving and hyperbaric applications. The standard is applicable to the following categories of gas mixtures: a) breathing oxygen; b) oxygen and nitrogen gas mixtures (known as nitrox); c) oxygen and helium gas mixtures (known as heliox); d) oxygen, helium and nitrogen gas mixtures (known as trimix). The standard is not applicable to compressed gases for medical use, or to gases for use in high altitude breathing apparatus. NOTE 1 The composition and purity of compressed air is specified in BS EN 12021. NOTE 2 If compressed air for a diving application is intended for creating a nitrox mixture this compressed air (also known as “oxygen compatible air”) is considered to be nitrox and is subject to the requirements specified in this standard.

Respiratory protective devices - Breathing gases for diving and hyperbaric applications

JT/T 40-2006 甲板减压舱检修规程

本标准规定了甲板减压舱检修的总则、减压舱本体、生命支持系统、电气和通信系统以及仪表的检修要求。 本标准适用于非饱和潜水的甲板减压舱。

Code of repair for deck decompression chamber

BS EN 14225-4:2005 潜水服.第4部分:一个大气压的潜水服(ADS).人类因素要求和试验方法

This European Standard specifies the human factors performance of one atmosphere diving suits (ADS) where the diver can make use of articulated arms and legs and is able to conduct underwater activities while breathing underwater. Marking, labelling, information to be provided at the point of sale, and instructions for use are also specified. Laboratory and practical performance tests are specified.

Diving suits - Part 4: One atmosphere suits (ADS) - Human factors requirements and test methods

BS EN 1809:1998 潜水附件.浮力补偿器.功能和安全要求.试验方法

This standard specifies functional, safety requirements and test methods applicable to inflatable type buoyancy compensating devices intended to provide divers with a means for controlling buoyancy. This standard is not applicable to other kinds of personal equipment such as life preservers, personal flotation or rescue devices including combined buoyancy and rescue devices.

Diving accessories - Buoyancy compensators - Functional and safety requirements, test methods

NF S52-352:1998 潜水附件.浮力补偿器.功能和安全要求、试验方法

Diving accessories. Buoyancy compensators. Functional and safety requirements, test methods.

DIN EN 1809:1998 潜水装置附件.浮力补偿器.功能和安全要求.试验方法

The document specifies functional, safety requirements and test methods applicable to inflatable type buoyancy compensating devices intended to provide divers with a means for controlling buoyancy.#,,#

Diving accessories - Buoyancy compensators - Functional and safety requirements, test methods; German version EN 1809:1997

JT 217-1996 TF88型带应急装置的通风式重潜水装具

TF88 Ventilated diving equipment with emergency supply

JT/T 206-1995 水下电焊把

本标准规定了水下电焊把的技术要求、检验要求和标志、包装及贮存。 本标准适用于直流电机电流为400-500A，空载电压为60--90V，导线为70-90mm2的水下电焊把。

Underwater electrode holder

JT/T 204-1995 TF-20型手动杠杆式潜水供气泵

本标准规定了手动杠杆式潜水供气泵(以下简称手抵泵)的技术要求，试验验收要求，以及标志、包装、运输和保管。 本标准适用于潜水员在潜水深度为20m 以浅时呼吸供气用与通风式重潜水装具配套使用的手揿泵。

Diving air supplying pump model TF-20(lever typ.)

JT/T 205-1995 TF型通风式重潜水装具

本标准规定了TF型通风式重潜水装具的产品分类、技术要求、试验方法、检验规则、气源及其设备和标志、包装、运输、贮存的要求。 本标准适用于在潜水深度45m,最大允许潜水深度60m，水流速度小于2m/s状态下供潜水作业的TF型水面供气通风式重潜水装具(以下简称为TF型重潜水装具)。

TF Surface supplied-type diving apparatus

JT/T 207-1995 69-Ⅲ型轻潜水装具

本标准规定了69-Ⅲ轻潜水装具的主要参数、技术要求、试验规则、标志、包装、运输和贮存。 本标准适用于由开式呼吸器及闭式呼吸器组合而成的混合潜水装具。

Self-contained underwater diving apparatus model 69-Ⅲ

JT/T 208-1995 6071HY型氦氧重潜水装具

本标准规定了6071HY型氦氧重潜水装具(以下简称潜水装具)的主要参数，基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于水面供气的同时有引射再生和开式二种循环的潜水装具。

Helium-Oxygen diving equipment model 6071 HY

JIS S 7305:1993 自戴式潜水呼吸用浮力调整器

SCUBA diving goods -- Buoyancy compensators

JIS S 7304:1993 自戴式潜水呼吸用调节器

SCUBA diving goods -- Regulators