R81 交通事故管理 标准查询与下载

GA 40-2004 交通事故案卷文书

本标准规定了交通事故案卷文书的种类、格式、归档及制作要求。 本标准适用于交通事故处理中涉及案卷文书的工作。

The filing document of traffic accident

DIN 70028:2004 乘用车.带有防抱死系统在直道上停车的停车距离的测量

This Standard specifies a procedure to determine the braking distance in an ABS controlled braking (full braking application) from straight forward driving.

Passenger cars - Measuring the stopping distance with ABS in straight-ahead stops

GA/T 488-2004 道路交通事故现场勘察车载照明设备通用技术条件

本标准规定了道路交通事故现场勘查车载照明设备(以下简称车载照明设备)的分类、要求、试验方法、检验规则、标志、铭牌和包装。 本标准适用于道路交通事故现场使用的车载照明设备。

General specification for lighting equipment in vehicle at traffic accident scene

BS ISO 12353-2:2003 道路车辆.交通事故分析.严重冲击测量法的使用指南

— applies to pre-sensitized metal plates;

Road vehicles - Traffic accident analysis - Guidelines for the use of impact severity measures

ISO 12353-2:2003 道路车辆 交通事故分析 第2部分：影响严重程度测量的使用指南

This part of ISO 12353 describes the suitability of various measures for the determination of impact severity in road vehicle accidents. It also summarizes the main characteristics of the methods used for determining impact severity.

Road vehicles - Traffic accident analysis - Part 2: Guidelines for the use of impact severity measures

ISO/TR 7861:2003 道路车辆.评价乘客防正面冲击用伤害风险曲线

This Technical Report presents injury risk curves that can be used for injury risk assessment in the evaluation of occupant protection in road-vehicle frontal impact. The measurements were made on frontal-impact crash test dummies which present acceptable levels of biofidelity response in accordance with ISO/TR 12349-1 and ISO/TR 12349-2 and which are used in the frontal-impact test procedures of existing International Standards.

Road vehicles - Injury risk curves for evaluation of occupant protection in frontal impact

SAE J1739-2002 设计中潜在故障模式和效果分析(设计 FMEA)、制造和组装过程中的潜在故障模式和效果分析(过程 FMEA)以及机械的潜在故障模式和效果分析(机械 FMEA)

This SAE Recommended Practice was jointly developed by DaimlerChrysler Corporation, Ford Motor Company and General Motors Corporation. This document introduces the topic of potential Failure Mode and effects Analysis (FMEA) and gives general guidance in the application of the technique. All FMEA's focus on the design, whether it be of the product, the process or the machinery used to build the product. An Applications Section (see Section 5) has been added to provide information on applying the FMEA technique to plant machinery and equipment using the Machinery FMEA (MFMEA).

Potential Failure Mode and Effects Analysis in Design (Design FMEA), Potential Failure Mode and Effects Analysis in Manufacturing and Assembly Processes (Process FMEA), and Potential Failure Mode and Effects Analysis for Machinery (Machinery FMEA)

BS ISO 12353-1:2002 道路车辆.交通事故分析.词汇

This part of ISO 12353 establishes a vocabulary relating to the investigation and analysis of road traffic accidents and to the application of accident data. It also lists other, commonly used terms in the domain.

Road vehicles - Traffic accident analysis - Vocabulary

ISO 12353-1:2002 道路车辆.交通事故分析.第1部分:词汇

This part of ISO 12353 establishes a vocabulary relat-ing to the investigation and analysis of road traffic ac-cidents and to the application of accident data. It also lists other, commonly used terms in the do-main. NOTE Additional terms and definitions, related to con-figuration aspects of road vehicle collisions, can be found in ISO 6813.

Road vehicles - Traffic accident analysis - Part 1: Vocabulary

GA 268-2001 道路交通事故尸体检验

本标准规定了道路交通事故死亡人员尸体检验鉴定的原则、方法和内容。 本标准适用于道路交通事故死亡人员的尸体检验或鉴定。

Examination of dead body in road traffic accidents

SAE J1674-1998 机动车事故信息早获取和保存

The purpose of this SAE Standard is to offer simplified and prioritized guidelines for collecting and preserving on-scene data related to motor vehicle accidents. It is intended that these guidelines improve the effectiveness of data collection, which will assist subsequent analysis and reconstruction of a particular incident. The document is to guide early data collectors whose objectives include documenting information related to the incident. It may be used by law enforcement personnel, safety officials, insurance adjusters and other interested parties. This document identifies categories of scene physical features that deteriorate relatively quickly and recommends documentation ask priorities. Detailed methods of collecting data are not part of this document. However, some widely used methods are described in the references.

Early Acquisition and Preservation of Information in a Motor Vehicle Accident

GA 49-1993 道路交通事故现场图绘制

Road traffic accident scene drawing

DIN 75204-1:1992 道路车辆.交通事故分析.与事故再现相关的概念

In this document the terms are defined for accident reconstruction including mostly short comments. This standard deals with the incidents of drive and collision as well as with path-time considerations.

Road vehicles; traffic accident analysis; concepts associated with accident reconstruction

DIN 75204-3:1992 道路车辆.交通事故分析和毁坏力学.与数据收集相关的概念

Road vehicles; traffic accident analysis and mechanics of injury; concepts allocated with data collection

DIN 75204-2:1992 道路车辆.交通事故分析.与事故痕迹类型和特点相关的概念

In this document the terms are defined for types and characteristics of traces for accident reconstruction including mostly short comments.

Road vehicles; traffic accident analysis; concepts associated with trace types and characteristics

DIN 75204 Bb.1:1992 道路车辆.交通事故分析.索引

Road vehicles; traffic accident analysis; index