S12 道岔与钢轨伸缩器 标准查询与下载
共找到 156 条与 道岔与钢轨伸缩器 相关的标准，共 11 页
本标准规定了标准轨距铁路道岔的技术要求、检验规则及标志、包装、运输、储运。 本标准适用于标准轨距铁路列车直向容许通过速度小于或等于160km/h的各类道岔、交叉（以下简称道岔），亦适用于其他指明采用本标准的产品。
Technical rule for turnouts of standard gauge railway
- ICS
- 45.080
- CCS
- S12
- 发布
- 2004-10-23
- 实施
- 2005-01-15
本标准规定了铁路道岔用高锰钢辙叉(以下简称辙叉)的技术要求、试验方法、检验规则和标志等。 本标准适用于铁路用高锰钢铸造辙叉，也适用于指明应用本标准的高锰钢辙叉及其他高锰钢铸件。
Technical specification for the solid manganese steel frogs
- ICS
- 45.080
- CCS
- S12
- 发布
- 2004-10-23
- 实施
- 2004-10-23
本标准规定了高锰钢辙叉焊补用电焊条(以下简称焊条)、自保护药芯焊丝(以下简称焊丝)、焊补设备、焊补范围和焊补要求、试验方法、焊后检查和检验规则等内容。 本标准适用于铁路高锰钢辙叉(以下简称辙叉)出现表面磨耗、裂纹、掉块、压溃以及铸造缺陷时的电弧焊补。
Specification for arc welding repair of high manganese steel crossing
- ICS
- 45.080
- CCS
- S12
- 发布
- 2003-10-31
- 实施
- 2003-10-31
This part of this European Standard specifies: — characterisation of wheel and track dimensions; — geometric design principles for wheel guidance; — design principles for wheel load transfer; — deciding whether movable crossings are needed. These are illustrated by their application to turnout components: — switches; — crossings; — check rails. but the principles apply equally to more complex layouts.
Railway applications - Track - Switches and crossings - Requirements for wheel/rail interaction
- ICS
- CCS
- S12
- 发布
- 2003-08-29
- 实施
- 2003-08-29
This European Standard provides an accepted "terminology" for switch and crossing work. With the assistance of diagrams, the various components are given definitions, and these specific names are regarded as obligatory. The definitions cover the constituent parts and design geometry of switch and crossing work, and include the movement of switches. Additional terminology of a more specific nature will be defined in the relevant part of the series. The present definitions set out the terms most generally used for the geometrical form and the construction of switches and crossings, omitting those of too special a nature.
Railway applications - Track - Switches and crossings - Definitions
- ICS
- CCS
- S12
- 发布
- 2003-08-29
- 实施
- 2003-08-29
This part of this European Standard covers the following subjects: — geometric design principles for wheel guidance; — definition of basic limits of supply; — applied forces and their adequate support; — tolerance levels. These are illustrated herein by application to a turnout. The main switch and crossing components are represented in turnouts and the principles used in turnouts apply equally to more complex layouts.
Railway applications - Track - Switches and crossings - Requirements for geometric design
- ICS
- CCS
- S12
- 发布
- 2003-08-29
- 实施
- 2003-08-29
Railway applications. Track. Switches and crossings. Requirements for geometric design
- ICS
- 93.100
- CCS
- S12
- 发布
- 2003-08-29
- 实施
- 2003-08-29
Railway applications. Track. Switches and crossings. Requirements for wheel/rail interaction
- ICS
- 93.100
- CCS
- S12
- 发布
- 2003-08-29
- 实施
- 2003-08-29
Rules for the compilation of railway turnout product models
- ICS
- CCS
- S12
- 发布
- 2002-02-09
- 实施
- 2002-07-01
この規格は，軌間1067mm及び1435mmの鉄道用分岐器類(以下，分岐器類という。)について規定する。ただし，全国新幹線鉄道整備法に基づく新幹線鉄道用分岐器類には適用しない。
Railway turnouts and crossings
- ICS
- 45.080
- CCS
- S12
- 发布
- 2001-06-27
- 实施
この規格は，軌間1067 mm及び1 435 mmの鉄道用分岐器類のガード(以下，ガードという。)の形状及び寸法について規定する。ただし，全国新幹線鉄道整備法に基づく新幹線鉄道用のガドには適用しない。
Guards for turnouts and crossings -- Shapes and dimensions
- ICS
- 45.080
- CCS
- S12
- 发布
- 1999-07-21
- 实施
本标准规定了液压起道器的有关定义、基本参数和安全使用限界、要求、试验方法、检验规则、标志和包装。 本标准适用于轨道作业用的液压起道器，不适用宽枕轨道的液压起道器。
General technical conditions for hydraulic lifters
- ICS
- CCS
- S12
- 发布
- 1998-02-24
- 实施
- 1998-09-01
ZK3—A type electropneumatic switch machine
- ICS
- CCS
- S12
- 发布
- 1997-09-21
- 实施
- 1998-04-01
Turnout conversion resistance adhesion force
- ICS
- CCS
- S12
- 发布
- 1997-04-10
- 实施
- 1997-10-01
Railway fixed equipment. Built-up common crossing and cast crossing obtuse with fixed switch diamond. Cast steel cradles of built-up common crossing with movable switch diamond. Inspection.
- ICS
- 45.080
- CCS
- S12
- 发布
- 1995-12-01
- 实施
- 1995-12-20
この規格は，軌間1067 mm及び1435 mmの鉄道用分岐器類のクロッシング(以下，クロッシングという。)の形状及び寸法について規定する。ただし，全国新幹線鉄道整備法に基づく新幹線鉄道用のクロッシングには適用しない。
Railway crossings -- Shape and dimensions
- ICS
- 45.080
- CCS
- S12
- 发布
- 1995-06-28
- 实施
Permissible passing speed of railway turnout
- ICS
- CCS
- S12
- 发布
- 1993-12-18
- 实施
- 1994-07-01
Guards for turnouts and crossings -- Shape and dimensions
- ICS
- 45.080
- CCS
- S12
- 发布
- 1992-04-09
- 实施
This standard applies to check rail devices for simple track points with spring switch blade, form S 49 rails as per DIN 5902 part 1 for 900 mm gauge as per DIN 20500. This standard applies to right-hand and left-hand points.#,,#
Check rail device for simple track points; 120 m radius, 1:9 inclination, 900 mm gauge
- ICS
- 4660
- CCS
- S12
- 发布
- 1992-03
- 实施
