S31 车钩与缓冲装置 标准查询与下载

DIN EN 15551:2009 轨道交通.铁路车辆.缓冲器

This Part of prEN 1555 specifies the general aspects of polyethylene (PE) piping systems in the field of the supply of gaseous fuels. It also specifies the test parameters for the test methods referred to in this standard. In conjunction with the other Parts of prEN 1555 it is applicable to PE pipes, fittings, and valves, their joints and to joints with components of other materials intended to be used undre the following conditions: a) a maximum operating pressure, MOP, up to and including 10 bar; b) an operating temperature of 20?C as reference temperature.

Railway applications - Railway rolling stock - Buffers; German version EN 15551:2009

TB/T 1670-2009 15号车钩样板

本标准规定了新造15号车钩(含15X型车钩)的样板种类、形式、主要尺寸及使用方法。 本标准适用于新造15号车钩(含15X型车钩)的样板设计和使用。

Gauge for No.15 coupler

TB/T 456-2008 机车车辆用车钩、钩尾框

本标准规定了铁路机车车辆用车钩、钩尾框的技术要求、验收规则、试验方法、标志及质量证明书、贮存、包装和运输等。 本标准适用于C级钢、E级钢新制铸造的铁路机车、车辆（客车、货车）用自动车钩、钩尾框、车钩零件及从板。锻造钩尾框可参照执行。

Couplers and coupler yokes for railway locomotive and rolling stock

TB/T 2843-2007 机车车辆用橡胶弹性元件通用技术条件

本标准规定了机车车辆用橡胶弹性元件的分类、基本性能及要求、试验方法、检验规则和标志、包装、贮存与运输等。本标准适用于机车车辆悬挂系统、设备安装系统、连接、限位部位等使用的起减振、缓冲、柔性连接、限位等作用的橡胶弹性元件。 本标准不适用于机车车辆用空气弹簧、密封橡胶制品、车钩缓冲器、软管和传送带。

General technical specification for elastic parts for railways

UIC OR 528-2007 客车用缓冲机构

1.1 - All coaches must be equipped at each end with buffers of identical type with a stroke of +0 110 - 5 mm Coaches which remain permanently coupled in operation shall be considered as a single vehicle for the purpose of these provisions. 1.2 - The characteristics listed under point 4 - page 5 are specified in order to: protect coaches against buffer impacts at speeds of at least 10 km/h; enable the coaches to run without special precautions through a curve/reverse curve with R -- 150 m separated by 6 m straight transition section, without risk of derailment or reduction of ride comfort; enable initial coupling to be performed in a curve with a minimum radius of 250 m, possibly requiring adjustment on straight track. Coaches with the following dimensions shall meet these conditions, if they are equipped with buffers in accordance with point 4.

Buffer gear for coaches

TB/T 2943.1-2007 机车车辆车钩组件 第1部分:钩舌销和钩尾销技术条件

TB/T 2943的本部分规定了机车车辆钩舌销和钩尾销的技术要求、试验方法与检验规则、标志和质量证明书。 本部分适用于经热处理的锻钢钩舌和钩尾销。

Couplers components for railway locomotive and vehicle Part 1: Specification of knuckle pivot pin and yoke key

TB/T 2943.2-2007 机车车辆车钩组件 第2部分:13A型车钩防跳上锁销组成技术条件

TB/T 2943的本部分规定了铁路货车用13A型和13号车钩防跳上锁销组成的制造技术要求、试验方法、检验规则及标志、包装、运输与贮存等。 本部分适用于13A型和13号车钩防跳上锁销组成及其零件的制造与检验。

Couplers components for railway locomotive and vehicle Part 2: Specification of anticreep top locklift assembly for No. 13A type coupler

BS EN 15020:2006 铁路设施.救援车挂钩.性能要求、特殊接口几何学和试验方法

This European Standard specifies the requirements for the rescue coupler for train sets compliant with the Technical Specification for Interoperability High Speed Rolling Stock. It defines the interfaces to which it has to match during rescue operations. It is suitable for locomotives fitted with UIC 520 pattern draw gear and buffers, i.e. moveable draw hook and draw gear capable of compressive loading. Provisions going beyond the scope of this European Standard need to be agreed upon by the contracting parties involved.

Railway Applications. Rescue Coupler. Performance Requirements, Specific Interface Geometry and Test Methods

BS EN 15020:2006+A1:2010 轨道交通.救援车挂钩.性能要求,特殊接口几何学和试验方法

Railway applications. Rescue coupler. Performance requirements, specific interface geometry and test methods

DIN EN 15020:2007 轨道交通.救援设备车钩.性能要求、专用联结几何尺寸和试验方法

This European Standard specifies the requirements for the rescue coupler for train sets compliant with the Technical Specification for Interoperability High Speed Rolling Stock. It defines the interfaces to which it has to match during rescue operations. It is suitable for locomotives fitted with UIC 520 pattern draw gear and buffers, i.e. moveable draw hook and draw gear capable of compressive loading.3) Provisions going beyond the scope of this European Standard need to be agreed upon by the contracting parties involved.

Railway applications - Rescue coupler - Performance requirements, specific interface geometry and test methods; English version of DIN EN 15020:2007-02

TB/T 3143-2006 铁路客车密接式车钩缓冲装置

本标准规定了密接式车钩缓冲装置（以下称钩缓装置）的技术要求、试验方法、检验规则、标志、包装、运输、贮存等。 本标准适用于新造铁道客车和动车组用钩缓装置。其他车辆或机车用钩缓装置亦可参照使用。

Tight-lock coupler and draft gear for railway passenger car

TB/T 1961-2006 机车车辆缓冲器

本标准规定了机车车辆用缓冲器的冲器的产品分类、基本性能参数、技术要求、制造要求、试验方法、检验规则及标志、包装、运输与贮存等。 本标准适用于机车车辆用缓冲器。

Draft gears for locomotives and cars

TB/T 2456.20-2006 机车车辆专用量具 第20部分:车辆闸瓦样板

本部分规定了铁道车辆闸瓦样板（以下简称样板）的种类、用途、形式、主要尺寸、技术要求及标志与包装。 本部分适用于检查铁道车辆用闸瓦及瓦背的检查样板和校对样板的设计、制造。

Special measurement tools for locomotives and vehicles. Part 20: Brake shoe gauge for rolling stock

TB/T 2950-2006 机车车辆车钩连接轮廓

本标准规定了机车车辆用自动车钩连接轮廓工作性能参数及连接轮廓。 本标准适用于机车用车钩和车辆用13号车钩、15号车钩、13A型车钩、15号小间隙车钩及联锁车钩。

Coupler connection contour for locomotives and rolling stock

TB/T 2048-2004 13号车钩段修样板

本标准规定了13号(含13A型)车钩段修样板的种类、形式及主要尺寸。 本标准适用于13号(含13A型)车钩段修样板的设计与使用。

Coupler gauge No.13 used for department repair

TB/T 1669-2004 13号车钩样板

本标准规定了新造13号车钩（含13A型车钩）样板的种类、形式、主要尺寸及使用方法。 本标准适用于新造13号车钩（含13A型车钩）样板的设计和使用。

Gauge for No.13 coupler

TB/T 493-2004 铁道车辆车钩缓冲装置组装技术条件

Assembling specifications of couplers and draft gears for railway car

TB/T 3094-2004 铁路客车折棚式风挡

本标准规定了铁道客车折棚式风挡技术条件、性能参数、组装要求、试验方法、检验规则等。 本标准适用于构造速度不大于200km/h的铁道客车及动车组用折棚式风挡(以下简称风挡)。

Gangway bellows for railway passenger car

BS DD ENV 13481-6:2002 轨道交通.导轨.紧固系统的性能要求.防衰减减震的专用紧固系统

Railway applications - Track - Performance requirements for fastening systems - Special fastening systems for attenuation of vibration

TB/T 3044-2002 13号车钩基本尺寸和性能

本标准适用于标准轨距铁路机、货车用13号上作用式车钩和13号下作用式车钩。

Basic size and performance of No. 13 coupler