S33 走行部分 标准查询与下载
共找到 383 条与 走行部分 相关的标准，共 26 页
Railway applications - Wheelsets and bogies - Axles - Product requirements.
- ICS
- 45.040
- CCS
- S33
- 发布
- 2011-01-01
- 实施
Railway applications - Wheelsets and bogies - Wheels - Tread profile.
- ICS
- 45.040
- CCS
- S33
- 发布
- 2011-01-01
- 实施
Railway applications - Wheelsets and bogies - Powered axles - Design method.
- ICS
- 45.040;45.060.01
- CCS
- S33
- 发布
- 2011-01-01
- 实施
Railway applications - Wheelsets and bogies - Powered axles - Design method.
- ICS
- 45.060.01
- CCS
- S33
- 发布
- 2011-01-01
- 实施
- 2011-01-15
Railway applications - Wheelsets and bogies - Non-powered axles - Design guide.
- ICS
- 45.040
- CCS
- S33
- 发布
- 2011-01-01
- 实施
Railway applications - Axleboxes - Performance testing; German version EN 12082:2007+A1:2010
- ICS
- 45.040
- CCS
- S33
- 发布
- 2011-01
- 实施
This European Standard specifies the characteristics of new wheelsets for use on European networks. This standard is applicable to wheelsets comprising elements that conform to the following European Standards: - EN 13262 for wheels; - EN 13261 for axles; This standard is not fully applicable to wheelsets undergoing maintenance. Some characteristics are given as a function of a category 1 or of a category 2. Category 2 can be divided into sub-categories (2a and 2b) to specify certain characteristics. Category 1 is generally chosen when the operating speed exceeds 200 km/h. The wheelset then comprises wheels and axle of category 1 as specified in EN 13262 for the wheels and EN 13261 for the axles.
Railway applications - Wheelsets and bogies - Wheelsets - Product requirements; German version EN 13260:2009+A1:2010
- ICS
- 45.040
- CCS
- S33
- 发布
- 2011-01
- 实施
Railway applications - Wheelsets and bogies - Axles - Product requirements; German version EN 13261:2009+A1:2010
- ICS
- 45.040
- CCS
- S33
- 发布
- 2011-01
- 实施
This standard: - defines the forces and moments to be taken into account with reference to masses, traction and braking conditions; - gives the stress calculation method for axles with outside axle journals; - specifies the maximum permissible stresses to be assumed in calculations for steel grade EA1N defined in EN 13261; - describes the method for determination of the maximum permissible stresses for other steel grades; - determines the diameters for the various sections of the axle and recommends the preferred shapes and transitions to ensure adequate service performance. This standard is applicable to: - solid and hollow powered axles for railway rolling stock; - solid and hollow non-powered axles of motor bogies; - solid and hollow non-powered axles of locomotives; - axles defined in EN 13261; - all gauges. This standard is applicable to axles fitted to rolling stock intended to run under normal European conditions. Before using this standard, if there is doubt as to whether the railway operating conditions are normal, it is necessary to determine whether an additional design factor has to be applied to the maximum permissible stresses. The calculation of wheelsets for special applications (e.g. tamping/lining/levelling machines) may be made according to this standard only for the load cases of free-running and running in train formation. This standard does not apply to workload cases. They are calculated separately. For light rail and tramway applications, other standards or documents agreed between the customer and supplier may be applied.
Railway applications - Wheelsets and bogies - Powered axles - Design method; German version EN 13104:2009+A1:2010
- ICS
- 45.040
- CCS
- S33
- 发布
- 2011-01
- 实施
本标准规定了铁道车辆轮对于滚动轴承的代号、技术要求、测量与检验方法、检验规则、制造标志、包装与贮存等。 本标准适用于铁道车辆轮对用新造轴承。
Rolling bearing in the railway passenger car and wagon
- ICS
- 45.060.20
- CCS
- S33
- 发布
- 2010-12-02
- 实施
- 2011-06-01
本标准规定了铁道货车用合成闸瓦的术语、定义和符号、技术要求、检查试验方法、检验规则、标志、包装、运输及贮存要求等。 本标准适用于最高运行速度为120km/h,轴重不大于25t的铁道货车用合成闸瓦。轴重大于25t的铁道货车用合成闸瓦可参照使用本标准。
Brake shoes for freight rolling stock of railways
- ICS
- 45.060.10
- CCS
- S33
- 发布
- 2010-12-02
- 实施
- 2011-06-01
本标准规定了铁道车辆非动力车轴设计方法; 本标准适用于正常条件下运行的铁道车辆上安装的车轴的设计，本标准不适用于工作负荷的情况，它们需要单独计算。
Design method for non.powered axles of rolling stock
- ICS
- 45.060
- CCS
- S33
- 发布
- 2010-12-02
- 实施
- 2011-06-01
Railway applications - Axleboxes - Performance testing.
- ICS
- 21.100.20;45.040
- CCS
- S33
- 发布
- 2010-12-01
- 实施
Railway applications - Axleboxes - Rolling bearings.
- ICS
- 21.100.20;45.040
- CCS
- S33
- 发布
- 2010-12-01
- 实施
本标准规定了铁路钢轨各种伤损的分类和编号、伤损描述、伤损原因、检测方法及应采取的措施。 本标准适用于钢轨伤损统计、伤损原因分析及伤损信息处理。 本标准不适用于以下情况的钢轨伤损: a)钢轨经切削、锻造等机器加工制成的钢轨制件,如道岔钢轨、护轨、伸缩调节器钢轨等; b）非钢轨伤损造成的行车事故或灾害损坏的钢轨; c)本标准规定以外的少量试验用特殊材质或特殊断面的特殊钢轨。
Catalogue of rail defects
- ICS
- 45.060.20
- CCS
- S33
- 发布
- 2010-10-10
- 实施
- 2011-04-01
Railway applications - In-service wheelset operation requirements - In-service and off-vehicle wheelset maintenance; German version EN 15313:2010
- ICS
- 45.040
- CCS
- S33
- 发布
- 2010-10
- 实施
本标准规定了铁路用Q460E微合金化钢魏氏组织形态和级别的金相检验评定方法、评定原则、组织特征和定量参数及评级图谱等。 本标准适用于铁路用Q460E微合金化钢魏氏组织的评定。
Metallographic examination graph spectrum of widmanstatten structure in microalloying steel used for railway
- ICS
- 45.060.01
- CCS
- S33
- 发布
- 2010-08-22
- 实施
- 2011-02-01
Railway applications - Wheelsets and bogies - Non-powered axles - Design method; German version EN 13103:2009
- ICS
- 45.040
- CCS
- S33
- 发布
- 2010-08
- 实施
Railway applications - Wheelsets and bogies - Wheels - Product requirements; German version EN 13262:2004+A1:2008
- ICS
- 45.040;45.060.01
- CCS
- S33
- 发布
- 2010-07
- 实施
Railway applications - In-service wheelset operation requirements - In-service and off-vehicle wheelset maintenance.
- ICS
- 45.040
- CCS
- S33
- 发布
- 2010-06-01
- 实施
- 2010-06-26
