共找到 185 条与 铁路货车 相关的标准,共 13 页
本标准规定了铁道货车车体静强度试验的项目内容、设备仪表及试验评定方法。 本标准适用于最高运行速度不大于120km/h,列车牵引总重不大于6000t,运煤专线10000t及其以上,轴重不大于25t的铁路标准轨距新造通用货车。其他货车可参照使用。
Test method for static strength of truck body
本标准规定了铁道通用货车上心盘疲劳试验及评定方法。 本标准适用于铁道通用货车用新造平面上心盘。
Fatigue test and evaluation method of the upper center plate of railway general freight car
Standard wagons - Ordinary bogie wagons - Characteristics
Code for design of railway freight car rolling stock facilities
Railway applications - Environmental conditions for equipment - Part 1: Equipment on board rolling stock; German version EN 50125-1:1999
Railway applications - Radio remote control system of traction vehicle for freight traffic.
The document defines the main dimensions and technical details for equipment of self-discharging wagons with side-wall flaps, with or without opening roof, for manufacturers and operators.
Railway vehicles - Wagons - Main dimensions, types
Railway applications - Testing of rolling stock after completion of construction and before entry into service; German version EN 50215:1999
Railway applications - Tank wagons - Part 1: Marking of tank wagons for the carriage of dangerous goods; German version EN 12561-1:1998
The document shows the possibilities and the limits concerning the design and use of regional freight wagons as permitted by the Railway construction and operating regulations (EBO).
Rail vehicles - Regional freight wagons - Requirements
本标准规定了铁路货车用低摩擦系数合成闸瓦的结构型式及基本尺寸、技术要求、试验方法、检验规则和标志、包装、运物与贮存等要求。 本标准适用于运行速度不大于95km/h的铁路货车用低摩擦系数合成闸瓦。 低摩擦系数合成阐瓦(以下简称闸瓦)可以和离磷铸铁闸瓦互换使用。
Synthetic Brake Shoe with Low Coefficient of Friction for Railway Freight Cars
本标准规定了准轨铁道峨车的一般技术要求、材料要求、结构要求、制造要求、涂装标记和检验规则等。 本标准适用于运送液体、液化气体和粉粒货物的新造幼车。对堪车的特殊要求,应符合相应标准或在技术文件中规定。
General technical conditions for railway tank cars
本标准规定了铁路客车车型、车号的编制方法。 本标准适用于中华人民共和国铁道部所属客车. 其他铁路客车车型、车号的编制原则上按本标准执行。
Railway passenger car type number code
本标准规定了铁路货车轮对无轴箱滚动轴承压装机的性能、技术要求及检验规则等。 本标准适用于铁路货车无轴箱滚动轴承压装机。
Specifications for press-fitting machines for rolling bearings without axleboxes for railway freight wheels
本标准规定了铁路货车转8A型转向架贝氏体球墨铸件(ADI)斜 楔的技术要求、试验方法、检验规则、包装、贮存和运输。 本标准适用于铁路货车转8A型转向架减振器斜楔。
Specifications for nodular cast iron wedges of friction dampers for railway wagons
本标准规定了铁道保温车隔热性能的试验评定方法.保温车的隔热性能采用综合传热系数K值来表示. 本标准采用两种试验评定方法:第一种是热稳定法,适用干各种保温车;第二种是非热稳定法,用在恒温试验室时,适用干各种保温车;当用在非恒温试验室时,仅适用于定型成批生产产品的抽检和旧车改造后的试验评定。
Test and evaluation method of thermal insulation performance of thermal insulation vehicle
本标准规定了新设计铁道重载列车用货车的基本要求。 本标准适用干牵引总重为5000t及其以上编组货物列车的货车(包括通用和专用货车)。
Basic requirements for freight cars for railway heavy-haul trains
Test method for heavy-duty rail car body interior noise measurement
Test method for heavy-duty railcars Cooling capacity test for hydraulically driven railcars
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号