T39 车用仪表及测试设备 标准查询与下载

BS AU 236:1990 道路车辆圆形电子转速表

The overall mounting and installation dimensions, certain electrical connections and signals for circular electronic tachographs.

Specification for circular electronic tachographs for road vehicles

GM 9982019-1990 清漆分散剂的清洁剂

Freigabemuster, fur die diese Vorschrift zutrifft, müssen nach dieser Vorschrift geprüft werden und von der Produktentwicklung und Konstruktion genehmigt sein

Solvent Cleaner for Dispersion Lacquer

GM 9985529-1990 喷胶热熔腐蚀预防化合物

This material specification describes the general requirements of material types from reinforced polyamide 66, which are used in injected or extruded form for moulded components (e.g. body or chassis).

Compound, Corrosion Preventive, Hot Melt, Sprayable Revision B

GM 9985489-1990 喷涂焊接热熔腐蚀预防

Samples of components or material released to this specification shall be tested for conformity with the requirements of this specification and approved by the responsible GM Department prior to the start of delivery of production level components or

Corrosion Preventive, Hot Melt, Weldable, Sprayable Revision C

GM 9985780-1990 转移膜粘合剂

Denna standard ar ett utdrag ur SMS 1895, utgava 1, som i sin tur overensstammer med ISO/R560- 1967 med undantag av att ror med ytterdiameter 36mm ej har medtagits.

Adhesive, Transfer Film

GM 9985723-1990 泡沫在地方热熔粘合剂

Samples of components or material released to this specification shall be tested for conformity with the requirements of this specification and approved by Product Engineering Department prior to commencement of delivery of bulk supplies.

Adhesive, Hot Melt, Foam-in-Place

GM 9985805-1990 热熔胶粘合剂

The case-hardening steels in this summary are presented in three distinct groups.

Adhesive, Hot Melt

GM 9985808-1990 热熔压敏胶粘剂

Steel according to this standard has no equivalent in Swedish (SS) or nternational (ISO) standard.

Adhesive, Hot Melt Pressure Sensitive

GM 9985829-1990 纸张磁带胶粘剂

Steel according to this standard has no equivalent in Swedish (SS) or International (ISO) standard.

Adhesive, Tape, Paper

NF R15-403:1989 道路车辆.温度开关.尺寸特性

ROAD VEHICLES. THERMOMETRIC SWITCHES. DIMENSIONAL CHARACTERISTICS.

GM 9985458-1989 热流向封闭剂

Freigabemuster, für die diese Vorschrift zutrifft, müssen nach dieser Vorschrift geprüft werden und von der Produktentwicklung genehmigt sein, ehe eine Lieferung erfolgen kann. Bei beabsichtigter Abweichung von dieser Vorschrift oder von den bisher frei

SEALER, HEAT FLOWING

GM 9985511-1989 热固化液体硅橡胶

All test pieces shall be manufactured by injection moulding.

Rubber, Heat Cured Liquid Silicone

GM 9985724-1989 泡沫在地方热熔粘合剂

Samples of components or material released to this specification shall be tested for conformity with the requirements of this specification and approved by Product Engineering Department prior to commencement of delivery of bulk supplies.

Adhesive, Hot Melt, Foam-in-Place

GM 9985744-1989 热熔胶粘合剂

Only the latest approved standards are applicable unless otherwise specified.

Adhesive, Hot Melt

GM 9985651-1989 氰基转眼之间粘合剂

I motorfordon for inredningsandamal In motor vehicles for interior fittings 8149-6 Varmetalig folie, med skummad baksida,for dorrkladslar och suflettkapa

Adhesive, Instant, Cyanoacrylate

GM 9985779-1989 汽车预清机

This standard is an extract from SMS 1795, issue 1, which in turn agrees with ISO/R560-1967 with the following exceptions:

CAR WASH PRECLEANER

GM 9985748-1989 喷胶水性胶粘剂

Sinteratahl unlegiert ader legiert. Gesinterte Formteile, einfach oder doppelt .

Adhesive, Waterbased, Sprayable

GM 9984865-1989 热敏感塑料面漆

Samples of components or material released to this specification shall be tested for conformity with the requirements of this specification and approved by the responsible GM Department prior to the start of delivery of production level components or

Topcoats for Heat Sensitive Plastics Revision A

GM 9985264-1989 氰基即刻胶粘剂

Unbeschaoet etwoiger durch den Abnehmer erfolgenden Stichprobenpr?iungen trogt der Lieferont die Verantwortung dafür, dar) die gelieferte Wore aie Opcl -2eichnunjsvorszhrifren erfirlii. Mustern sowie Teilen einer ersten Serienlieferung ist uncufpeiororr

Adhesive, Instant, Cyanoacrylate

GM 9985318-1989 泡沫膜胶粘剂

Freigabemuster, fur die diese Vorschrift zutrifft, müssen nach dieser Vorschrift geprüft werden und von der Produktentwicklung und Konstruktion genehmigt sein

Adhesive, Foam Tape