T41 轿车 标准查询与下载

KS R ISO 4131:2006 道路车辆.客车的尺寸代码

이 규격은 KS R ISO 3833에 규정된 승용차와 승용차로부터 유래된 상용 차량과의 데

Road vehicles－Dimensional codes for passenger cars

ISO 9816:2006 乘用车.车辆转弯时的停车反作用力.开环试验方法

This International Standard specifies open-loop test methods to determine the reactions of a vehicle in a turn to a sudden drop in motive power resulting from release of the accelerator pedal. It applies to passenger cars as defined in ISO 3833. The open-loop manoeuvre specified in this test method is not representative of real driving conditions, but is useful to obtain measures of a vehicle’s power-off behaviour resulting from specific types of control inputs under closely controlled test conditions.

Passenger cars - Power-off reaction of a vehicle in a turn - Open-loop test method

DB11/T 223-2004 更新出租小轿车通用技术要求

本标准规定了出租小轿车安全、环保、车身、发动机和车内装置的要求及检验方法。 本标准适用于北京市出租小轿车。

Technical requirements for renewing taxicab

ISO 17288-2:2004 乘用车.无级变速性能.第2部分:转向脉冲开环试验方法

This part of ISO 17288 specifies a procedure for determining the free control stability of a passenger car as defined in ISO 3833, by measurement of the transient behaviour following steering pulse input, starting from a straight-ahead, steady-state status. NOTE The open loop manoeuvre specified in this part of ISO 17288 is not representative of normal driving conditions, but is useful for obtaining a measure of vehicle transient behaviour.

Passenger cars - Free-steer behaviour - Part 2: Steering-pulse open-loop test method

ISO 6597:2002 道路车辆.有或无防锁装置的带液压制动系统的摩托车.制动性能的测量

Road vehicles - Motor vehicles with hydraulic braking systems with and without antilock device - Measurement of braking performance

ISO 3832:2002 轿车.行李箱.基准容积的测量方法

This International Standard specifies a method of measuring the reference volume of the luggage compartments of passenger cars.

Passenger cars - Luggage compartments - Method of measuring reference volume

ISO 4040:2001 道路车辆 机动车辆中的手操纵件、指示器和信号装置的位置

This International Standard specifies the location of the controls in motor vehicles by subdividing the space within reach of drivers into specific zones to which certain controls essential to the safe operation of vehicles are assigned. It also specifies certain combinations of functions for multifunction controls and the degree to which certain indicators and tell-tales are to be visible. This International Standard is applicable to hand-operated controls, to indicators and to tell-tales in all motor vehi-cles, excluding motorcycles and mopeds, as defined in ISO 3833. NOTE A specification for a control indicator or tell-tale does not imply that the item must be fitted.

Road vehicles - Location of hand controls, indicators and tell-tales in motor vehicles

JIS D 1070:1998 乘用车.稳态迂回试验程序

この規格は，乗用車の定常円旋回性能を，半径ー定の円又は円弧上を一定車速で走行し，かつ，段階的に車速を上げることによって評価するためのオープンループ試験方法について規定する。

Passenger cars -- Steady state circular test procedure

ISO 6255:1997 乘用车 乘用车后窗洗涤和刮刷系统 试验方法

This International Standard specifies test methods for passenger car (as defined in ISO 3833) rear-window washing and wiping systems, when these are fitted, excluding convertible passenger cars with rear-windows made of plastic. This International Standard does not specify reference areas or levels of performance, since at the time it was prepared there was sufficient data available. NOTE — It may be possible to carry out tests of a similar nature on windscreen and rear-window simultaneously. The test methods are intended to apply to types of power-driven vehicles which do not differ from one another in respect of the following essential features which affect washing and wiping performance: a) shape, size and surface characteristics of the rear-window; b) characteristics of each system designated by the vehicle manufacturer as contributing to the washing and wiping of the rear-window.

Passenger cars - Rear-window washing and wiping systems - Test methods

ISO 4040:1997 轿车.手控装置,指示器和信号装置的位置

Passenger cars - Location of hand controls, indicators and tell-tales

ISO 3958:1996 乘用车 驾驶员手控活动范围

Specifies the boundaries of hand-reach of passenger car hand-control locations that can be reached by different proportions of male and female driver populations. Directs towards the initial design states of a new vehicle programme. Replaces the first edition.

Passenger cars - Driver hand-control reach

QC/T 199-1995 汽车车轮平衡块

本标准规定了汽车车轮夹片式平衡块的结构型式、质量、尺寸、技术要求、试验方法、检验规则和标志。 　　本标准适用于钢制车轮和轻合金车轮。

car wheel balance weight

ISO 3006:1995 乘用车车轮 试验方法

Passenger car road wheels - Test methods

ISO 9816:1993 乘用车 车辆转弯时的停车反作用力 开环试验方法

Applies to passenger cars as defined in ISO 3833. The purpose is to determine the power-off effect on course holding and directional behaviour of a vehicle, whose steady-state circular motion is disturbed by power-off only. The sudden release of the accelerator pedal causes this effect. It is not possible at present to use this procedure and test results for regulation purposes.

Passenger cars; power-off reactions of a vehicle in a turn; open-loop test method

DIN 13249:1993 残疾人用的搭乘车.要求

Passenger cars suitable for the use of handicapped persons; requirements

NF R14-506:1992 乘用车.风档刮水器.锥形滚花轴端和挂肩

Passenger cars. Windscreen wiper systems. Tapered, knurled shaft ends and arm-holes.

ISO 7862:1992 乘用车 模拟前碰撞时评定成年人约束系统的滑车试验规程

Passenger cars; sled test procedure for evaluating adult restraint systems in simulated frontal collision

ISO 7422:1991 旅游居住车 旅居挂车 居住要求

Specifies certain functional and safety requirements. Includes: construction and design, internal equipment, water supply, storage and disposal, space heating, thermal insulation, services, ventilation, fire precautions, warning notice and users' handbook. Annex A forms an integral part of this standard.

Leisure accommodation vehicles; caravans; habitation requirements

DIN 75302:1991 乘用车顶部承载粱.要求和试验

Safety requirements and test procedures are given for projecting parts, dynamic load, displacement, vibration, quasi static load, forced in driving direction, lifting forces, side-wind forces, and corrosion.

Roof racks for passenger cars; requirements and testing

GOST 4.396-1988 产品质量指标系统.轿车.目录术语

Настоящий стандарт устанавливает номенклатуру основных показателей качества легковых автомобилей, предназначенных для перевозки пасса

Product-quality index system. Passenger cars. Nomenclature of indices