T53 工程汽车 标准查询与下载

GJB 5702-2006 轻型伴随桥设计定型试验规程

本标准规定了轻型伴随桥设计定型试验要求、条件、内容、方法和结果评定。 本标准适用于轻型伴随桥设计定型试验，其它鉴定试验也可参照使用。

Design finalizing test procedures for light accompanying bridge

DIN 14555-3/A2:2006 设备和仪器运输车.第3部分:应急车RW.修改件A2

The document contains for the emergency tender RW the amendment of the explosion-proof portable transfer pump for dangerous fluids in the oil removal set in table 2 and the updating of explosion-proof plug and socket outlet.

Vehicles carrying tools and gears - Part 3: Emergency tender RW; Amendment A2

DIN 14555-22:2005 工具和设备用车辆.第22部分:后勤用车辆GW-L2

The document contains requirements for the vehicles carrying tools and gears GW-L2 which is applied by the fire brigade for logistic tasks.

Vehicles carrying tools and gears - Part 22: GW-L2 for logistic tasks

DIN 14555-21:2005 工具和设备用车辆.第21部分:后勤用车辆GW-L1

The document contains requirements for the vehicles carrying tools and gears GW-L1 which is applied by the fire brigade for logistic tasks.

Vehicles carrying tools and gears - Part 21: GW-L1 for logistic tasks

DIN 14555-12:2005 运工具和设备用车辆.第12部分:GW-G2型损坏管理服务车

The document specifies damage control tenders GW-G for hazardous materials. The GW-G protect the environment and provide the tools to fight against accidents with hazardous materials as well as oil accidents.

Vehicles carrying tools and gears - Part 12: Damage control tender GW-G

SAE J1116-2004 越野自行式工作机的分类

This SAE Standard applies to machines that are in regular commercial production. Included are the following categories: Earthmoving; Implements and Attachments; Agricultural Tractors; Forestry, Road Building and Maintenance, Specialized Mining, and Powered Industrail Trucks. In spite of the appearance of the same names, such as tractors in more than one category, further development of this and related standards will demonstrate that there are differences in the fully-equipped working machine that may require distinction as to intended end-point field usage. These differences include: Names of optional implements; Names of components of optional implements; Definitions of specification terms as affected by installed optional implements; Different mounting provisions on the machines for implements and other attachments; Differences in design to achieve objectives for performance, durability, or operator or public safety.

Categories of Off-Road Self-Propelled Work Machines

QC/T 719-2004 高空作业车

本标准规定了高空作业车的定义、基本规格、要求、试验方法、检验规则和标志、使用说明书及随车文件、运输、贮存。 　　本标准适用于以定型汽车底盘改装的最大平台高度70m以下的作业车。

Hydraulic aerial cage

DIN 14555-3/A1:2004 装备车及器械车.第3部分:应急车RW.修改件A1

The document contains the amendment of some equipment parts of the standard loading in table 1 and the amendment of some equipment parts of the oil removal set in table 2 of the emergency tender RW.

Vehicles carrying tools and gears - Part 3: Emergency tender RW; Amendment A1

ARMY A-A-52512 VALID NOTICE 1-2004 气动1吨拉力电控的滚筒绞车

A-A-52512, dated 18 August 1995, has been reviewed and determined to be valid for use in acquisition

WINCH, DRUM, POWER OPERATED, 1-TON PULL, PNEUMATIC

AIR FORCE MIL-PRF-83818 B-2004 4000及 6200磅能力卡车,叉车,内燃机前置/侧装载

This Specification covers a front/side loading, sit-down rider, dieselengine- driven, counter-balanced forklift truck. The truck will have a telescopic mast, front wheel drive, power steering, hydraulic brakes, solid pneumatic tires, and an overhead guar

TRUCK, FORKLIFT, 4,000 AND 6,200 POUND CAPACITY, FRONT/SIDE LOADING, INTERNAL COMBUSTION ENGINE

AIR FORCE MIL-PRF-32181-2004 4000及6200磅重容量,装载机,内燃机用卡车,叉车

This specification covers a commercial, sit-down rider, diesel-engine-driven, counter-balanced forklift truck (hereinafter called the truck). The truck will have a telescopic mast, front wheel drive, power steering, hydraulic brakes, pneumatic tires, and

TRUCK, FORKLIFT, 4,000 AND 6,200 POUND CAPACITY, LOADING, INTERNAL COMBUSTION ENGINE

AIR FORCE A-A-58079 A-2004 在24英寸的负荷中心6000磅承受力柴油机驱动起重胶轮叉车

This commercial item description covers the general equirements for a diesel engine-driven, front wheel-drive, rear wheel steer, pneumatic-tires, 6,000 pound at 24 inch loadcenter capacity, forklift truck. It shall be used for handling cargo in and around

TRUCK, LIFT, FORK, DIESEL,ENGINE-DRIVEN, PNEUMATIC-TIRES, 6,000 POUNDS CAPACITY AT 24-INCH LOAD CENTER

AIR FORCE A-A-58080 A-2004 在24英寸的负荷中心4000磅承受力柴油机驱动起重胶轮叉车

This commercial item description covers the general requirements for a diesel engine-driven, front wheel-drive, rear wheel steer, pneumatic-tired, 4,000 pound at 24 inch loadcenter capacity, forklift truck. It will be used for handling cargo in and aroun

TRUCK, LIFT, FORK, DIESEL ENGINE-DRIVEN, PNEUMATIC-TIRES, 4,000 POUNDS CAPACITY AT 24-INCH LOAD CENTER

AIR FORCE A-A-58081 A-2004 在24英寸的负荷中心4000磅承受力EE额定降落操作前/侧装载起重叉车

This commercial item description covers the general requirements for 4,000 pound at 24-inch load-center capacity, electric, front/side loading, forklift truck. It will be capable of picking up and depositing loads that are directly in front, and 90 degre

TRUCK, LIFT, FORK, ELECTRIC, FRONT/SIDE LOADING, SIT-DOWN OPERATOR, 4,000 POUND CAPACITY, EE RATED

DB50/ 145-2003 加盖密闭车辆通用技术条件

本标准规定了加盖密闭车辆的定义、要求、检验、标志和质量保证。本标准适用于在重庆市主要城区内、进行易扬尘、洒漏固体物运输的加盖密闭车辆。本标准不适用于车厢无后门的后卸式自卸汽车。无后门的后卸式自卸汽车、车厢门缝处易扬尘、漏洒固体物的车辆，需进行车厢改造后才适用于本标准。

General Technical Conditions for Stamped Sealed Vehicles

DIN 14555-1:2003 装备车及器械车.第1部分:一般要求

The standard contains terms, types and requirements, for technical equipments.

Vehicles carrying tools and gears - Part 1: General requirements

DLA A-A-59246 VALID NOTICE 1-2003 双滚筒露面型拖式压路机

A-A-59246, dated 16 June 1998, has been reviewed and determined to be valid for use in acquisition

ROLLER, TOWED, OPEN-FACE TYPE, TWO DRUM

AIR FORCE A-A-59727-2002 在24英寸的负荷中心下20000磅重容量的使用气动车轮的的柴油机驱动起重叉车

Description. This commercial item description covers the general requirements for a diesel engine driven, front wheel drive, rear wheel steer, pneumatic tired, 20,000 pound capacity, forklift truck. The forklift is intended for handling cargo in and arou

TRUCK, LIFT, FORK, DIESEL-ENGINE-DRIVEN, PNEUMATIC-TIRED, 20,000 POUND CAPACITY AT 24 INCH LOAD CENTER

DIN 14555-3:2002 工具和传动装置运输车.应急保障车 RW

Vehicles carrying tools and gears - Part 3: Emergency tender RW

QC/T 668-2000 混凝土搅拌运输车试验方法

本标准规定了自行斜筒式混凝土搅拌运输车的试验方法。 　　本标准适用于采用定型汽车底盘改装的搅动容量不大于12m^(3)的自行斜筒式混凝土搅拌运输车。

Concrete mixer truck test method