T64 行走系统 标准查询与下载

DB65/T 2734-2007 农用挂车轮轴总成

The agriculture always becomes with the trailer wheel axle

JB/T 10652-2006 轮式拖拉机轮毂螺栓、车轮螺钉和螺母 技术条件

本标准规定了轮式拖拉机轮毂螺栓、车轮螺钉和螺母的技术要求、检测方法、检验规则、标志、包装、运输和贮存。 本标准适用于轮式拖拉机轮毂螺栓、车轮螺钉和螺母（以下简称轮毂螺栓、车轮螺钉和螺母），农用运输机械和其他轮式农业机械的轮毂螺栓、车轮螺钉和螺母也可参照使用。

Wheeled tractor Hub bolts, wheel screws and nuts Specifications

JB/T 10612-2006 拖拉机配重 技术条件

本标准规定了轮式拖拉机配重的技术要求、检验方法、检验规则、标志、包装、运输和贮存。 本标准适用于拖拉机配重（以下简称配重）。

Tractor counter balance- Specifications

JB/T 51097-1999 拖拉机和农林机械车轮 产品质量分等

Product quality classification of tractor and agricultural and forestry machinery wheels

DIN ISO 8759-1:1999 农业机械和拖拉机.前悬装置.第1部分:动力输出轴和三点悬挂装置(ISO 8759-1-1999)

Agricultural machinery and tractors - Front-mounted equipment - Part 1: Power take-off and three-point linkage (ISO 8759-1:1998)

JB/T 8887-1999 拖拉机和农林机械车轮.技术条件

本标准规定了拖拉机和农林机械车轮的技术要求，检验规则，标志、包装、运输和贮存。 本标准适用于拖拉机、农用运输车、联合收割机、农用挂车和其它农林机械配充气轮胎的车轮。

Wheels of tractor and machinery for agriculture and forestry.Specifications

JB/T 9828-1999 轮式拖拉机.前轴技术条件

　　本标准规定了轮式拖拉机前轴总成的技术要求、试验方法、检验规则、标志、包装及贮存。 本标准适用于轮式拖拉机的刚性悬架前轴。

Front axle of wheeled tractors.Specifications

BS 3486-1:1996 农业机械、农具和拖车车轮规范 轮毂固定尺寸规范

This International Standard specifies the dimensional requirements for attaching wheels to hubs on tractors and machinery for agriculture and forestry. The flat attachment type with centring on a central bore is the recommended type for future equipment. NOTE 1 Characteristics of attachments with spherical or conical centring on the stud hole are shown in annex A. Specifications indicated do not imply that the wheel is interchangeable from one vehicle to another. NOTE 2 Wheels fitted to driven front and rear axles which incorporate gear reduction or corresponding mechanisms within the wheel hub envelope are not covered by this International Standard.

Specification for wheels for agricultural machinery, implements and trailers. Specification for wheel-to-hub fixing dimensions

BS AU 50-4.4.1a:1995 轮胎和车轮.轮辋外廓和尺寸.农业用拖拉机和机械轮辋.轮胎层级标记系列轮辋规范

This part of ISO 4251 sets out rim dimensions for tyres of the ply rating marked series for agricultural tractors and machines. Tyre designation and dimensions, load ratings and tyre classification and nomenclature are given in ISO 4251-1, ISO 4251-2 and ISO 4251-4 respectively. The rims specified in this part of ISO 4251 may also be used for the tyres specified in ISO 7867-1 [2] and ISO 8664[3]. All dimensions in this part of ISO 4251 are given in millimetres. NOTE 1 Terms used are in accordance with ISO 3911:1977[1].

Tyres and wheels - Rim profiles and dimensions - Agricultural tractor and machine rims - Specification for ply-rating marked series rims

ARMY A-A-52531-1995 普遍2英寸和3.5英寸第五轮中心主轴

This CID covers the requirements for a universal kingpin used in coupling military trailer to a truck-tractor or a trailer converter dolly fifth wheel. It also includes the requirements for kingpins used in trailers when transported on flat cars.

KINGPIN, FIFTH WHEEL, 2 INCH AND 3.5 INCH, UNIVERSAL

JIS D 6703:1994 农用轮式拖拉机三点悬挂装置的尺寸

この規格は，主として農業用車輪トラクタに使用する3点支持装置(以下，支持装置という。)の主要寸法について規定する。

Dimensions of three-point linkages for agricultural wheeled tractors

ARMY A-A-52479-1993 3.5英寸第五轮中心立轴

The General Services Administration has authorized the use of this commercial item description(CID) as a replacement for MS53037E, which is canceled.

KINGPIN, FIFTH WHEEL, 3 1/2 INCH

ARMY A-A-52478-1993 2英寸第五轮中心立轴[被代替:ARMY MS53036 REV D CANC NOTICE 1.ARMY MS53036 REV D.ARMY MS53036 REV C.ARMY MS53036 REV B]

The General Services Administration has authorized the use of this commercial item description(CID) as a replacement for MS53036D, which is canceled

KINGPIN, FIFTH WHEEL, 2 INCH [Superseded: ARMY MS53036 REV D CANC NOTICE 1, ARMY MS53036 REV D, ARMY MS53036 REV C, ARMY MS53036 REV B]

NF U10-206:1992 农用拖拉机.试验规程.第7部分:轴功率的测定

AGRICULTURAL TRACTORS. TEST PROCEDURES. PART 7 : AXLE POWER DETERMINATION.

JIS B 9215:1988 农用拖拉机联结销钉

この規格は，農業用トラクタと作食機との連結に用いる連結ピン(以下，ピンという。)のうち主要なものについて規定する。

Connecting-pins for agricultural tractors

CSA D313-M85-CAN3-1985 拖车行走装置.第2版.通用指令第1号

Evaluation biologique des dispositifs medicaux - Partie 11: Essais de toxicite systemique Premiere Edition; ISO 10993-11: 1993

Train De Roulement De Remorque Fiche No 1

JIS D 6704:1984 农用拖拉机悬挂装置的尺寸

この規格は，農業用トラクタに使用するドローバーのヒッチ部又は固定ヒッチ(以下，ヒッチという。)の全要寸法について規定する。

Dimensions of hitchs for agricultural tractors

JIS D 6709:1984 农用轮式拖拉机装配于轮毂上轮的尺寸

この規格は，農業用車輪トラクタの車輪取付部の主要寸法について規定する。

Dimensions for wheel fixing on hub for agricultural wheeled tractors

BS 6508:1984 农用拖拉机和机械履带宽度建议

Preferred track widths.

Recommendations for track widths for agricultural tractors and machinery

JIS B 9206:1983 农用手扶拖拉机车轮固定连接部分尺寸

この規格は，輪距調節可能の歩行形トラクタの車輪又はアタッチメントのハブ穴と，これを貫通する軸()の主要寸法について規定する。注()軸には，車軸及び延長軸を含む。

Wheel fixing dimensions for agricultural walking tractors