U01 技术管理 标准查询与下载

CFR 46-42.50-2014 船舶. 第42部分:国内外海上航行. 第42.20子部分:干舷高. 第42.50-15节:美国船只的载沿岸线证书.

(a) The forms of the coastwise load line certificate, other than for special service which are provided for in part 44 of this subchapter, certifying to the correctness of the load line marks assigned under the regulations in this part are C1, C2 and C3.？The detailed application of these forms is as specified in § 42.07–45(e).

Shipping. Part42:Domestic and foreign voyages by sea. Subpart42.20:Freeboards. Section42.50-15:Coastwise load line certificates for U.S.-flag vessels.

CFR 46-61.40-2014 船舶. 第61部分:定期测试和检查. 第61.40子部分:重要系统自动化的设计验证和周期性测试. 第61.40-10节:测试程序的细节.

(a) Test procedure documents must be in a step-by-step or checkoff list format.？Each test instruction must specify equipment status, apparatus necessary to perform the tests, safety precautions, safety control and alarm setpoints, the procedure to be followed, and the expected test result.

Shipping. Part61:Periodic tests and inspections. Subpart61.40:Design verification and periodic testing of vital system automation. Section61.40-10:Test procedure details.

KS V ISO PAS 28007:2013 船舶与海上技术.提供船上私人雇佣武装保安人员的私人海上安保公司(PMSC)指南(形式合同)

이 표준은 KS V ISO 28000을 적용하고 있는 회사(조직)가 사설계약무장보안요원(PCASP)을 승선시키고 있다는 것을 증명할 수 있도록 특정분야에 대한 추가 권고가 포함된 지침을 제공하기 위한 것이다. 이러한 지침을 준수한다는 것을 주장하기 위해서는 모든 권고사항은 준수해야 한다.이 표준에 대한 적합확인은 자체, 상대방 또는 제3자(인증기관)에 의하여 수행될 수 있다. 인증을 활용함에 있어서, 인증서상에 “사설계약무장보안요원(PCASP)을 제공하는 사설해상보안회사(PMSC)로서 KS V ISO PAS 28007의 모든 지침을 적용하여 인증함”이라는 문구를 표기할 것을 권고한다.

Ships and marine technology ? Guidelines for Private Maritime Security Companies (PMSC) providing privately contracted armed security personnel (PCASP) on board ships (and pro forma contract)

CB/T 3801-2013 船舶建造方针编制要求

本标准规定了船舶建造方针的编制依据、编制流程和编制内容。本标准适用于民用船舶建造方针的编制。军用船舶及其他海洋结构物可参照使用。

Requirements for compiling guiding principles of ship construction

BS 6349-1-1:2013 海事工作. 总则. 操作计划和设计实用规程

This part of BS 6349 gives recommendations and guidance on general criteria relevant to the planning, design, construction and maintenance of structures and facilities set in the maritime environment. It also gives recommendations and guidance in respect of environmental and operational matters that need to be considered in planning and design of maritime works.

Maritime works. General. Code of practice for planning and design for operations

ISO 129-4:2013 技术产品文档(TPD).尺寸和公差的指示.第4部分:造船图纸的尺寸标注

This part of ISO 129 specifies the dimensioning for general use on metal hulls on shipbuilding drawings.

Technical product documentation (TPD) - Indication of dimensions and tolerances - Part 4: Dimensioning of shipbuilding drawings

KS V 0027-2012 造船术语.机械.振动、噪音、空气及环境污染

이 표준은 주로 선박 기관에서 이용하는 진동, 소음, 환경 및 대기오염 관련 용어에 대하여

Shipbuilding-Machinery-Vibration, noise, environment and air pollution-Vocabulary

KS V 0020-2012 造船术语(普通船舶篇)

이 표준은 조선에 사용되는 일반 용어와 그 정의에 대하여 규정한다.

Glossary of terms for shipbuilding(General)

KS V 7473-2012 船舶间运输油类货物作业系统的设计指南

이 표준의 목적은 국제해양오염방지협약(MARPOL) 부속서 I, 제8장 규칙 제40, 41

Design guidance of mooring system for ship to ship transfer operation of oil cargo

KS V 7472-2012 基于风险的船舶设计认可指南

이 표준은 기존의 규정 및 규칙에서 다루지 않는 선박의 신개념 설계안 또는 대체 설계안을

Guidelines on approval of risk-based ship design

KS V 7471-2012 基于风险的船舶安全设计通用指南

이 표준은 신개념ㆍ신기술 선박의 위험도 기반 설계(risk-based design:RBD)

General guidelines on risk-based ship design for safety

KS V 7470-2012 船舶涂料与检查的通用指南

이 표준은 국제 항해에 종사하는 모든 선박의 IMO PSPC 규정을 적용하지 않는 부위의

Coatings and inspection guidelines for steel ships

KS V ISO 30007:2012 船舶与海洋技术.船舶回收中散发和暴露石棉的预防措施

? ??? ??? ?? ???? ???? ?? ???? ??? ???? ?? ??? ??

Measures to prevent asbestos emission and exposure during ship recycling

SC/T 8001-2011 海洋渔业船舶柴油机油耗

本标准规定了海洋渔业船舶用柴油机主机、辅机的燃油消耗率和机油消耗率。 本标准适用于海洋渔业船舶对柴油机油耗的确定。

Fuel and lubricating oil consumption for ocean diesel engine of fishing vessel

CB/T 14-2011 船舶产品专用图样和技术文件编号

本标准规定了船舶产品专用图样和技术文件编号的方法与规则。 本标准适用于各类船舶产品的报价、合同设计、初步设计、详细设计、辅助设计、建造综合性工艺文件、完工图样、技术文件、试验及研究资料的专用图样和技术文件的编号。

Numbering for special drawings and techinical documents of marine product

CB/T 4200-2011 船舶质量证明书编写通用要求

本标准规定了钢质船舶质量证明书的内容、格式及编写要求。 本标准适用于钢质船舶建造企业编写船舶质量证明书。

General compiting requirements for ship quality certificates

ISO/PAS 30007:2010 船舶和海洋技术.船舶回收过程中的石棉废气和暴露预防措施

This Publicly Available Specification provides effective methods for minimizing the dangers of asbestos during ship recycling, reducing both the release of asbestos into the environment and worker exposure to asbestos. It helps ship recyclers to fulfil the requirements of The Hong Kong International Convention for the Safe and Environmentally Sound Recycling of Ships, 2009 [5].

Ships and marine technology - Measures to prevent asbestos emission and exposure during ship recycling

CB/T 2999-2010 船舶设计单位设计条件基本要求及评价方法

本标准规定了在中华人民共和国境内从事一般船舶和渔业船舶的合同设计至详细设计的单位设计条件基本要求及评价方法。 本标准适用于对各类各级从事船舶设计单位具备的设计条件的评价。 从事一般船舶和渔业船舶生产设计的单位，其具备的设计条件的评价可参照采用。

Basic requirement and evaluation method of design condition for ship design organization

CB/T 3001-2010 船舶修理企业生产条件基本要求及评价方法

本标准规定了在中华人民共和国境内从事船舶修理(不包括单项修理、航次修理、随航修理和船员保养自修)的企业生产条件基本要求及其评价方法。 本标准适用于对各类各级从事钢质、铝质一般船舶及钢质、木质渔业船舶修理企业具备的生产条件的评价。

Basic requirement and evaluation of production condition for ship repair enterprise

CB/T 3001-2009 船舶修理企业生产条件基本要求及评价方法

Basic requirements and evaluation methods for production conditions of ship repair enterprises