U24 船用装置 标准查询与下载

CB* 3326-1987 集装箱导轨或紧固件间公差

本标准规定的公差，适用于船舶上装载GB 1413-85《集装箱外部尺寸和额定重量》标准中的1A、1AA、1C、1CC型集装箱时的集装箱导轨或与船体固定的集装箱紧固件，且满足我国钢质海船规范(86年修改通报)、英国劳氏《对货物集装箱固缚装置的指导规则》(81年)、西德劳氏《船上二集装箱的装载和固缚规则》(83年)的规定。

Tolerance between container rails or fasteners

CB* 3302.1-1987 双千斤索单吊杆装置 技术要求

本标准规定的双千斤索单吊杆装置，适用于杂货船、多用途船、运木船和散装货轮等海洋运输船舶的货物能卸设备。对内河船和海洋客货轮亦适用。

Technical requirements for double jack cable single boom device

DLA MS9192 REV B-1987 0.164 (NO. 8)-36型12点钻头镉板钢锚杆机

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

BOLT-MACHINE, STEEL, DRILLED 12 POINT HEAD, .164 (NO. 8)-36 CADMIUM PLATE

ISO 6325:1987 造船 掣链器

本标准规定了与起锚机和起锚绞盘一起使用的掣链器的功能、操作、设计、结构、安全和强度的 要求。 本标准适用于与起锚机和起锚绞盘一起使用的掣链器的设计、制造和验收。

Shipbuilding; Cable stoppers

DLA MS9152 REV B-1987 0.5625-18型12点镉板钢锚杆机

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

BOLT, MACHINE, STEEL, 12 POINT HEAD, .5625-18, CADMIUM PLATE

ISO 6045:1987 造船及海上结构物 吊杆座 装置和部件

Defines types of assemblies and specifies dimensions and materials of components for derrick boom gooseneck bearings of conventional derrick design to be fitted on-board ships for cargo handling purposes. Does not apply to special types of derricks.

Shipbuilding and marine structures; Bearings for derrick goosenecks; Assemblies and components

CB/T 33-1999 索具套环

Rope thimbles

CB/T 32-1999 船用卸扣

Shackles for ship

JIS F 2205:1987 吊杆架端头件

この規格は，JIS F 2201(船用鋼板製デリックプーム)に規定するデリックブームを水平格納する場合に使用するブームレスト順部金物(以下，頭部金物という。)について規定する。

Boom rest head pieces

CB* 3061-1987 合金钢卸扣

本标准规定的卸扣主要用于船舶起货设备。

Alloy steel shackle

CB* 450-1987 操舵导链滚轮

本标准规定的操舵导链滚轮和拉杆托轮用于人力操舵的中小型船舶。

Steering Chain Roller

CB/T 3854-1999 船用眼环

Eye rings for ship

CB/T 60-1999 船用眼板

Eye plates for ship

DIN ISO 6044:1986 造船.船吊杆根部叉头.主要尺寸

The standard lays down the main dimensions for interchangeability and the materials for fork-type heel fittings for ships' derrick booms and accociated bolts or pins.; The following dimensions are standardized: thickness of side pieces of fork, clear width of fork, depth of fork, diameter of clearance hole for bolt or pin, diameter of bolt or pin.; A fork-type heel fitting device forms a component part of a ships' derrick boom. It is fitted to the heel end of the derrick boom. It comprises a double lug fitting and an accociated hinge bolt or pin for the conjunction with the pin of the gooseneck bearing.; This conjuntion allows the derrick boom to be raised, lowered and slewed.#,,#

Shipbuilding; fork-type heel fittings for ships' derrick booms; main dimensions; identical with ISO 6044, edition 1985

DIN ISO 8148:1986 造船.固定吊杆眼板.与ISO 8148－1985版本等同

This standard specifies diemnsions and materials for fixed type head fittings on ships' derrick booms for cargo handling purposes. In addition to that guidance information on the positioning of the guy eye plate (according to DIN ISO 8146) on the derrick boom is given in this standard.

Shipbiulding; derrick head fittings, fixed type; identical with ISO 8148, edition 1985

DLA MS9033 REV B-1986 AMS 5735型0.190 (NO.10)-32,12点抗热钢锚杆机

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

BOLT-MACHINE, 12 POINT HEAD HEAT RESISTANT STEEL, .190 (NO.10)-32, AMS 5735

DLA MS9149 REV B-1986 0.375-24UNF-3A型12点钢锚杆机

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

BOLT, MACHINE, 12 POINT HEAD, STEEL, .375-24UNF-3A

DLA MS9146 REV B-1986 0.190-32 UNF-3A型12点钢锚杆机

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

BOLT, MACHINE, 12 POINT HEAD, STEEL, .190-32 UNF-3A

DLA MS9147 REV B-1986 0.250-28 UNF-3A型12点钢锚杆机

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

BOLT, MACHINE, 12 POINT HEAD, STEEL, .250-28 UNF-3A

DLA MS9148 REV B-1986 0.3125-24 UNF-3A型12点钢锚杆机

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

BOLT, MACHINE, 12 POINT HEAD, STEEL, .3125-24 UNF-3A