U26 舱面属具 标准查询与下载

KS V 2333-2004 船舶用棘轮扳手

이 규격은 강제 창구 덮개의 개폐 등에 사용하는 래칫 스패너에 대하여 규정한다.

Ships ratchet spanners

KS V 2324-2004 水密拉门

이 규격은 배의 기계실에서 샤프트 터널로 통하는 출입구, 기타에 사용하는 수밀 미닫이 문(

Wateright sliding doors

KS V 3012-2004 船舶用测深管甲板固定件

이 규격은 선박에 사용하는 측심관 갑판 쇠붙이에 대하여 규정한다.

Deck pieces for sounding pipes

BS ISO 799:2004 船舶和海上技术.领航员扶梯

This International Standard specifies requirements for a ship's pilot ladder which is provided to enable a maritime pilot to embark and disembark a ship safely along a vertical portion of the ship's hull. It is applicable to merchant ships which embark and disembark maritime pilots with the ship underway. National maritime safety administrations are urged to accept ladders complying with this International Standard on their ships, as complying fully with the requirements of the 1974 International Convention for the Safety of Life at Sea (SOLAS), as amended.

Ships and marine technology - Pilot ladders

BS ISO 5797:2004 造船和海上技术.耐火结构的窗和侧舷窗

This International Standard provides requirements for windows and side scuttles for fire-resistant constructions for installation in "A" class and "B" class divisions as defined in FTP Code, Part 3 [(IMO Resolution A 754 (18)]. It lays down the requirements for the construction of glass panes and frames, as well as the testing and marking of such windows and side scuttles. "B" class divisions are required only for inside installations.

Ships and marine technology - Windows and side scuttles for fire-resistant constructions

ISO 21005:2004 船舶和海上技术.窗户和舷窗用热钢化安全玻璃

This International Standard specifies materials and finish, dimensions for interchangeability, tolerances, parallelism and flatness, testing, marking and designation of thermally toughened safety glass panes for windows complying with ISO 3903 and side scuttles complying with ISO 1751.

Ships and marine technology - Thermally toughened safety-glass panes for windows and side scuttles

BS ISO 17899:2004 船舶和海上技术.船上窗用电刮水器

This International Standard specifies requirements for marine electric window wipers. It covers the required features, performance, constructional materials and electrical equipment for wiper systems for sea-going vessels where bridge duty is regularly maintained. It covers the performance, materials and electrical equipment for wipers required to meet the needs of ISO 8468 where such wipers are specified.

Ships and marine technology. Marine electric window wipers

ISO 5797:2004 造船和海上技术.耐火结构的舷窗和窗

This International Standard provides requirements for windows and side scuttles for fire-resistant constructions for installation in "A" class and "B" class divisions as defined in FTP Code, Part 3 [(IMO Resolution A 754 (18)]. It lays down the requirements for the construction of glass panes and frames, as well as the testing and marking of such windows and side scuttles. "B" class divisions are required only for inside installations.

Ships and marine technology - Windows and side scuttles for fire-resistant constructions

KS V ISO 3674:2004 造船.内河船舶.甲板栏杆

이 규격은 선박의 갑판 핸드레일(이하 갑판 레일)의 형태, 설계, 기본 치수에 대하여

Shipbuilding-Inland vessels-Deck rail

JT/T 249-2004 内河船舶平式风雨密舱口盖

本标准规定了内河船用平式风雨密舱口盖的类型、结构形式、基本尺寸和技术要求。 本标准适应于内河船舶需要保持平整风雨密开口处。

Flate-type weather-tight hatch covers for inland-waterway vessels

JT/T 358-2004 内河船舶轻型单扇钢质门

本标准规定了轻型单扇钢质门的分类、结构型式及规格、标记、部件结构、主要材料、技术要求、试验、验收及标志等要求。 本标准适用于内河钢船上层建筑舱室。

Inside single steel door for inland river ship

ANSI/ASTM F1092:2004 挤拔玻璃纤维(Grp)增强塑料制露天防风暴和方型防护扶手规格

This specification provides the material requirements, construction, installation, and testing requirements for open-weather deck, storm-and-guard, fiberglass square railing systems. Components are to be manufactured by the pultrusion process. The values stated in inch-pound units are to be regarded as the standard. The SI units given in parentheses are for information purposes only. The following safety hazards caveat pertains only to the test methods portion, Section 9, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Specification for Fiberglass (Grp) Pultruded Open-Weather Storm- and Guard-Square Handrails

CB/T 3956-2004 舷梯平移装置

本标准规定了舷梯平移装置的型式与参数、要求、试验方法、检验规则、标志、包装和运输。 本标准适用与宽度为600mm~800mm钢、铝质舷梯相配套的平移装置的制造和验收。

Gangway translation device

ISO 799:2004 船舶和海上技术.引航员梯

This International Standard specifies requirements for a ship's pilot ladder which is provided to enable a maritime pilot to embark and disembark a ship safely along a vertical portion of the ship's hull. It is applicable to merchant ships which embark and disembark maritime pilots with the ship underway. National maritime safety administrations are urged to accept ladders complying with this International Standard on their ships, as complying fully with the requirements of the 1974 International Convention for the Safety of Life at Sea (SOLAS), as amended.

Ships and marine technology - Pilot ladders

ASTM F987-04 轻便中层平甲板支柱标准规范

1.1 This specification covers the design, construction, and installation of intermediate portable flush deck stanchions. Intermediate stanchion is defined as any stanchion that is not an end or corner stanchion.1.2 Stanchions shall be used on interior and exterior decks, to provide temporary protection to minimize the danger of personnel falling overboard or to a lower level in the ship in areas where the installation of a fixed system would interfere with vessel operations. 1.3 Stanchions may be used with 3/8-in. (9.5-mm) galvanized close link chain or wire rope lifelines 9/16-in. (14-mm) top course, 7/16-in. (11-mm) lower courses. 1.4 This specification covers only the stanchions and does not cover requirements for the chain or wire rope lines to be supported by the stanchion. 1.5 The values stated in inch-pound units are to be regarded as the standard.

Standard Specification for Portable Intermediate Flush Deck Stanchion

ASTM F987-04(2010) 轻便平甲板立杆标准规范

1.1 This specification covers the design, construction, and installation of intermediate portable flush deck stanchions. Intermediate stanchion is defined as any stanchion that is not an end or corner stanchion. 1.2 Stanchions shall be used on interior and exterior decks, to provide temporary protection to minimize the danger of personnel falling overboard or to a lower level in the ship in areas where the installation of a fixed system would interfere with vessel operations. 1.3 Stanchions may be used with 3/8-in. (9.5-mm) galvanized close link chain or wire rope lifelines 9/16-in. (14-mm) top course, 7/16-in. (11-mm) lower courses. 1.4 This specification covers only the stanchions and does not cover requirements for the chain or wire rope lines to be supported by the stanchion. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Specification for Portable Intermediate Flush Deck Stanchion

ASTM F1092-04 玻璃纤维挤拔制露天防风暴和方型护栏设备的标准规范

1.1 This specification provides the material requirements, construction, installation, and testing requirements for open-weather deck, storm-and-guard, fiberglass square railing systems. Components are to be manufactured by the pultrusion process. 1.2 The values stated in inch-pound units are to be regarded as the standard. The SI units given in parentheses are for information purposes only.1.3 The following safety hazards caveat pertains only to the test methods portion, Section 9, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Fiberglass (GRP) Pultruded Open-Weather Storm and Guard, Square Railing Systems

ASTM F1092-04(2010) 玻璃纤维挤拔制露天防风暴和方型护栏设备的标准规范

1.1 This specification provides the material requirements, construction, installation, and testing requirements for open-weather deck, storm-and-guard, fiberglass square railing systems. Components are to be manufactured by the pultrusion process. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The following safety hazards caveat pertains only to the test methods portion, Section 9, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Fiberglass (GRP) Pultruded Open-Weather Storm and Guard, Square Railing Systems

NAVY QPL-22262-28-2004 船外壳清洁喷砂法

This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest effective issue of the applicable specification. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release the contractor from compliance with the specification requirements.

ABRASIVE BLASTING MEDIA SHIP HULL BLAST CLEANING

KS V 2330-2003 船舶用油密舱口盖

이 규격은 선박에 사용하는 유밀 해치 커버(이하 커버라 한다.)에 대하여 규정한다.

Ships’ oiltight hatch covers