U26 舱面属具 标准查询与下载

DIN 81701:2015 内河航行用船舶. 可倾斜及可拆卸式栏杆的支柱和支架

Inland navigation vessels - Stanchions and holders for tiltable and detachable railings

DIN 83512:2015 内河航运船只.外甲板梯子

Inland navigation vessels - Outboard ladders

DIN 81705:2015 海轮的可拆卸栏杆

Removable railings for seagoing vessels

DIN 81703:2015 海轮甲板上的固定护栏的出入门

Gates in fixed guard rails on the deck of seagoing vessels

DIN 81704:2015 海轮船楼和甲板室扶手

Handrails on superstructures and deckhouses on seagoing vessels

DIN 83224:2015 船梯休息平台

Resting platforms for ships ladders

DIN 83202-3:2015 船用梯.第3部分:重型

Ladders on ships - Part 3: Heavy type

DIN 83202-2:2015 船用梯.第3部分:中型

Ladders on ships - Part 2: Medium type

JIS F 2622:2015 领航员舷梯

Pilot accommodation ladders

DIN 81706:2014 航海客船的甲板固定护栏

Fixed guard rails on deck of sea-going passenger ships

CB/T 4378-2014 活动踏步钢制舷梯吊架

本标准规定了活动踏步钢质舷梯吊架(简称吊架)的分类和标记、要求、试验方法、检验规则和标志等。本标准适用于活动踏步钢质舷梯中与A型舷梯翻梯装置配套使用的吊架的设计、制造和验收。

Hanger for steel accommodation ladder with rotatable treads

CB/T 3757-2014 海上平台斜梯

本标准规定了海上平台斜梯(以下简称斜梯)的分类和标记、要求、试验方法、检验规则、标志和包装、运输和贮存。本标准适用于海上平台非液舱及非货舱处所斜梯的设计、制造和验收。

Inclined ladder for offshore platform

CB/T 4379-2014 活动踏步钢制舷梯翻梯装置

本标准规定了活动踏步钢质舷梯翻梯装置(以下简称翻梯装置)的分类和标记、要求、试验方法和检验规则等。本标准适用于活动踏步钢质舷梯翻梯装置的设计、制造和检验。

Turning device for accommodation ladder with ratatable treads

CB/T 3756-2014 海上平台栏杆

本标准规定了海上平台露天区域使用的固定式栏杆(以下简称栏杆)的分类、标记、要求、试验方法和检验规则。本标准适用于各类海上平台栏杆的设计、制造和验收。

Handrail for offshore platform

CB/T 4380-2014 活动踏步钢质舷梯

本标准规定了活动踏步钢质舷梯(简称舷梯)的结构型式和标记、要求、试验方法、检验规则、标志及运输和贮存等。本标准适用于船用活动踏步钢质舷梯的设计、制造和验收。

Steel accommodation ladder with rotatable treads

CB/T 3722-2014 驾驶室气密移门

本标准规定了船舶驾驶室气密移门(以下简称移门)的分类和标记、要求、试验方法、检验规则和标志、包装、运输和贮存。本标准适用于移门的设计、制造和验收。

Gastight sliding door for wheelhouse

CB/T 4392-2014 船用人孔盖

本标准规定了船用人孔盖(简称人孔盖)的分类和标记、要求、试验方法、检验规则、标志及包装、运输和贮存等。本标准适用于钢质船舶用的人孔盖的设计、制造和验收。

Marine manhole cover

BS ISO 17357-2:2014 船舶与海洋技术. 漂浮式充气橡胶护舷. 低压

Ships and marine technology. Floating pneumatic rubber fenders. Low pressure

ISO 17357-1:2014 船舶与海洋技术. 漂浮式充气橡胶护舷. 第1部分: 高压

This part of ISO 017357 specifies the material performance, and dimensions of high-pressure floating pneumatic rupber fenders, which are intended to be used for the berthing and mooring of a ship to another ship or berthing structure.Italso specifiesthe testand inspection procedures forhigh-pressure floating pneumatic rubber fenders. This part of ISO 17357 does not address any Safety hazards associated with its use. It is the user'S responsibility to establishn appropriate safety and health practices and determine the applicability of regulatory limitations before usingthis part ofISO 17357.

Ships and marine technology - Floating pneumatic rubber fenders - Part 1: High pressure

ISO 17357-2:2014 船舶和海洋技术. 浮动气动橡胶护舷. 第2部分: 低气压

This part of ISO 17357 specifies the material performance, and dimensions of low-pressure floating pneumatic rubber fenders, which are intended to be used for the berthing, and mooring of a Ship to another Ship or berthing structure. It also specifies the minimum test and inspection procedures for floating low-pressure pneumatic rubber fenders. This part ofISO 17357 does not address the methods for Selecting the correct fendertype or any safety hazards associated with its use. It is the user's responsibility to establish appropriate safety and health practices and determine the applicability of regulatory limitations before using this part ofISO 17357.

Ships and marine technology - Floating pneumatic rubber fenders - Part 2: Low pressure