U32 内河交通运输船专用设备 标准查询与下载

KS V ISO 7236:2004 内河船.顶推式船用可拆换信号杆.安装装置

이 규격은 푸시 토(push-tow)용 내해 항해 선박의 고정식 신호 마스트의 마스트

Inland navigation vessels-Demountable signal masts for push-tows-Mounting attachment

BS EN 14504:2004 内河航运船只.浮动码头.要求和试验

This European Standard specifies safety requirements for floating landing stages and their equipment. It is not applicable to: - bank structures such as quay walls, sheeting walls, piles and dolphins; - floating landing stages for recreational craft; - more severe requirements for floating landing stages used for the transhipment of dangerous goods; - any landing stages required between vessel and floating landing stage.

Inland navigation vessels - Floating landing stages - Requirements, tests

NF J84-341*NF EN 526:1994 内河航行船舶.长度8米以下的登陆桥.要求、类型

Inland navigation vessels. Gangway with a length not exceeding 8 M. Requirements, types.

ISO 7236:1991 内河航行 顶推-拖船可倒信号桅杆 安装附件

This International Standard specifies the main di-mensions, design, technical requirements and ma-terials of the lower part of demountable signal masts and mast stands for fixing signal masts, for push-tow inland navigation vessels. NOTE 1 Demountable signal masts are located while in navigation on some barges of a push-tow in accordance with regulations valid for the corresponding navigation zone. When the signal masts normally fitted to the barges of a push-tow are not required, they are to be stored on the pushing vessel. In the case of demountable signal masts higher than the maximum height of 6,5 m, it is necessary for these masts to be collapsible and an inte-gral part of the push barge.

Inland navigation vessels; demountable signal masts for push-tows; mounting attachment

STAS 12898-1990 定性简单抽样方法，LOIS质量的零接受值

1 Prezentul standard stabile?te planurile simple de verificare prin atribute, eu num?r de acceptare zero (A = 0), a calit??ii loturilor de produse folosind nivelul de calitate acceptabil asociat (AQL asociat) ?i bazate pe principiul de zero defecte ?n e?a

Simple sampling plans by attributes, by zero acceptance number of lots quality

ISO 6205:1988 内河船 常规密封系统 基本技术要求

The systems are used for sealing off the load compartments on inland navigation vessels. Does not determine the design, but examples of it are given in 6 figures. It also does not contain data to be entered in the customs certificates. Defines custom sealing system, seal and binding elements as parts of these systems.

Inland navigation vessels; customs sealing systems; basic technical requirements

ISO 3876:1986 造船 内河船舶 手孔

Specifies the dimensions and design of watertight and oiltight hand-holes for inland vessels.

Shipbuilding; Inland vessels; Hand-holes

CB* 3334-1988 内河船下舱门盖

本标准规定了下舱门盖的型式及规格等。 本标准适用于内河船舶的船员舱棚、旅客舱棚(载客人数少于30人的旅客舱室)及机舱棚等出入处的防风雨下舱门盖。

Riverboat lower hatch cover

CB* 3322-1987 内河船用轻型单扇钢质门

本标准适用于内河钢船上层建筑舱室。

Lightweight single-leaf steel door for inland ships

CB 3334-1988

CB* 3332-1988 内河船舶手摇矩形窗

本标准规定了手摇矩形窗的型式、规格、结构尺寸、标记、技术要求等。 本标准适用于内河船舶的客舱、船员舱、机舱、客厅、餐厅、休息室，驾驶室等舱室。

Hand-operated rectangular windows of inland ships