U57 船用液压、气动元件及附件 标准查询与下载
共找到 104 条与 船用液压、气动元件及附件 相关的标准，共 7 页
本标准规定了船用气动系统必须遵循的技术要求、试验方法、检验规则、标志及包装等。 本标准适用于各种舰船和海上工程用的气动元件及气动系统与辅件。工程机械、冶金、化工等行业的气动元件、气动系统和辅件，也可参照本标准。
General technical specifications of pneumatic systems for ship
- ICS
- 47.020.20
- CCS
- U57
- 发布
- 1991-05-22
- 实施
- 1992-02-01
本标准规定了冷冻式和吸附式气源净化装置（下称净化装置）的分类、技术要求、试验方法和检验规则。 本标准适用于各类船舶及海上平台以压缩空气为动力源的控制系统（包括气动仪表，气动逻辑元件等）所需要的控制气源净化装置，以除掉压缩空气中的水分、油分和灰尘杂质。
Cleaning equipments of controled air source for ship
- ICS
- 47.020.90
- CCS
- U57
- 发布
- 1991-05-22
- 实施
- 1992-02-01
本标准规定了船用流量控制伺服阀的术语、技术要求、试验方法和检验规则等。 本标准适用于以液压油为介质的各类船舶及海上装置用电液流量控制伺服阀。其他类型的伺服阀，如压力控制伺服阀、有级间电反馈的伺服阀亦可参照本标准。
General specification of electro-hydraulic servo valves for ship
- ICS
- 47.020.30
- CCS
- U57
- 发布
- 1989-03-31
- 实施
- 1990-01-01
General specification of electro-hydraulic servo valve for ship
- ICS
- 47.020
- CCS
- U57
- 发布
- 1989-03-31
- 实施
- 1990-01-01
本标准适用于船用油滤器（以下简称滤器）的一般检验，不包括性能检验。
Method of inspection for ship filter
- ICS
- 47.020.20
- CCS
- U57
- 发布
- 1986-04-21
- 实施
- 1987-04-01
This test specification applies to sampling valves with nominal pressure PN 10 in the drinking water installation, which are used to collect drinking water samples in order to assess the condition of the drinking water according to the Drinking Water directive including the influ
Sampling valves in drinking water installations - Requirements and tests
- ICS
- 23.060.10
- CCS
- U57
- 发布
- 2020-11-01
- 实施
Special balance valve group for hydraulic steering gear
- ICS
- 47.020.30
- CCS
- U57
- 发布
- 2017-04-12
- 实施
- 2017-10-01
Marine inner curve radial roller type low speed high torque hydraulic motor
- ICS
- 47.020.30
- CCS
- U57
- 发布
- 2017-04-12
- 实施
- 2017-10-01
Marine hydraulic winch constant tension control valve group
- ICS
- 47.020.30
- CCS
- U57
- 发布
- 2017-04-12
- 实施
- 2017-10-01
本标准规定了船用(15 MPa)以切换工作腔方式构成复式排量的横梁顶杆式叶片马达的分类和标记、要求、检验规则等内容。本标准适用于工作介质为液压油的船用横梁顶杆式叶片马达(以下简称为马达)的设计、生产与验收。
Vane motor with crossbeam puch rod for ship
- ICS
- 47.020.30
- CCS
- U57
- 发布
- 2013-07-22
- 实施
- 2013-12-01
本标准规定了船用舱口盖液压缸(以下简称液压缸)的分类、技术要求、试验方法及检验规则,标志和包装等。本标准适用于双作用单活塞杆船用舱口盖液压缸的设计、生产和验收。其他船用液压缸也可参照执行。
Marino hydraulic cylinder for hatch covers
- ICS
- 47.020.30
- CCS
- U57
- 发布
- 2013-07-22
- 实施
- 2013-12-01
本标准规定了船用(6.3 MPa)以切换工作腔方式构成复式排量的圆弧顶杆式叶片马达的分类和标记、要求、检验规则等内容。本标准适用于工作介质为液压油的船用圆弧顶杆式叶片马达(以下简称为马达)的设计、生产与验收。
Vane motor with crossbeam puch rod for ship
- ICS
- 47.020.30
- CCS
- U57
- 发布
- 2013-07-22
- 实施
- 2013-12-01
This SAE Recommended Practice identifies and examines the various parameters which must be considered in selecting hydraulic systems filters, their locations within the system and the dirt capacity of the filter elements. This document is generally applicable to all ship hydraulic systems but does not apply to personal or recreational watercraft.
Ship Systems and Equipment Hydraulic Systems Filter Selection Parameters
- ICS
- 47.020.20
- CCS
- U57
- 发布
- 2013-05-31
- 实施
This specification sheet establishes requirements for high collapse pressure configuration filter elements of several configurations with a minimum filtration ratio of 75 for particles larger than 10 µm when designed and tested in accordance with SAE J 2321 and this specification sheet.
Disposable Hydraulic Filter Elements 21 MPa Collapse Pressure, Filtration Ratio = 75 at 10 Šm, 75 to 175 L/Min
- ICS
- 43.060.30
- CCS
- U57
- 发布
- 2013-05-31
- 实施
This SAE Hydrospace Recommended Practice provides the designer with guidance for the selection of directional control valves for use in the hydraulic systems of surface ships and submersibles. This guidance includes use of standard valves and interfaces, minimum envelopes which should be reserved to permit interchangeability, and environmental considerations.
Selection of Hydraulic Directional Control Valves
- ICS
- 23.100.50;47.020.05
- CCS
- U57
- 发布
- 2013-05-31
- 实施
This specification sheet establishes requirements for a high collapse pressure configuration filter element of a specific configuration with a minimum filtration ratio of 75 for particles larger than 7 µm when designed and tested in accordance with SAE J2321 and this specification sheet.
Disposable Hydraulic Filter Element 190 L/Min Flow, 21 MPa Collapse Pressure, Filtration Ratio = 75 at 7 Šm
- ICS
- 43.060.30
- CCS
- U57
- 发布
- 2013-05-31
- 实施
- 2013-01-01
This specification sheet establishes requirements for low collapse pressure elements of a specific configuration with various efficiency ratings designed and test in accordance with SAE J2321 and the requirements for this specification sheet.
Disposable Hydraulic Filter Element 115 L/Min Flow, 1.000 MPa Collapse Pressure, Filtration Ratio = 75 at 6 and 10 Šm
- ICS
- 43.060.30
- CCS
- U57
- 发布
- 2013-05-31
- 实施
- 2013-01-01
本标准规定了船用液控单向阀(以下简称单向阀)的分类、要求、试验方法、检验规则及标志、包装、运输和贮存。本标准适用于以石油基液压油为工作介质的船用单向阀的设计、制造和检验。其他行业用的单向阀的设计、制造和检验可参照使用。
Hydraulic pilot controlled check valve for ship
- ICS
- 47.020.30
- CCS
- U57
- 发布
- 2013-04-25
- 实施
- 2013-09-01
本标准规定了船用内曲线径向球塞式低速大转矩液压马达(以下称液压马达)的分类、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于液压马达的设计、制造与验收。
hydraulic motor of type radial spherical plug low speed and high torque for ship
- ICS
- 47.020.30
- CCS
- U57
- 发布
- 2013-04-25
- 实施
- 2013-09-01
