U62 船用电控装置及测量设备 标准查询与下载

GJB 6425-2008 静电陀螺监控器通用规范

本规范规定了静电陀螺监控器（以下简称监控器）的要求、质量保证规定和交货准备等。 本规范适用于静电陀螺监控器的设计、制造和检验。

General specification for electrostatically supported gyro monitor

CB 768-2008 软汇流条规范

本规范规定了软汇流条（以下简称汇流条）的要求、质量保证和交货准备等。 本规范适用于潜艇及潜器蓄电池与主干电缆的软性连接或其他软性连接的汇流条的设计、制造和验收。

Specification for soft busbar

CB 902-2008 潜艇密封测深装置规范

本规范规定了潜艇密封测深装置（以下简称测深装置）的要求、质量保证规定和交货准备。 本规范适用于潜艇用测深装置的设计、制造和检验。

Specification for seal sounding unit of submarine

GJB 6413-2008 舰船机舱自动化控制台通用规范

本规范规定了舰船用机舱自动化控制台（以下简称控制台）的要求、质量保证规定和交货准备等。 本规范适用于控制台的设计、制造、安装、试验和验收。

General specification for engine room automatic control console of ships

IEC TR 62482:2008 船舶用电气装置.电磁兼容性.船舶电缆装置的优化.常规距离的试验方法

This Technical Report describes tests methods carried out to determine minimum routing distances in order to avoid crosstalk of fast transients (bursts). The test results may be applied to cable installations according to IEC 60092-352.

Electrical installations in ships - Electromagnetic compatibility - Optimising of cable installations on ships - Testing method of routing distance

JIS F 8076 AMD 1:2007 船舶电气设施.第504部分:专用零部件.控制和仪器仪表(修改件1)

JIS F 8076:2005を，次のように改正する。

Electrical installations in ships -- Part 504: Special features -- Control and instrumentation (Amendment 1)

ISO 22472:2006 船舶和航海技术.航海数据记录仪(VDR)的操作和安装用指南

This International Standard provides guidance for the planning, installation and operational testing of VDR S-VDR installations according to the electric/electronic and acoustic specifications of IMO A.861 (20), IMO MSC.163 (78) and IEC 61996 (including IEC 61996-2, Simplified voyage data recorder). These standards mainly deal with interfaces between VDR/S-VDR and external sensors, which is the main subject for technical agreements between user, shipyard, VDR/S-VDR supplier and/or sensor manufacturers when installations are planned. In addition, matters of performance test and playback are also described. Furthermore, details for checking of items related to the interfaces and the installation are introduced. This International Standard is not intended for the standardization of performance factors and functional requirements related to VDR and/or S-VDR. Hereafter, VDR means VDR and S-VDR unless specifically indicated otherwise. NOTE All text of this International Standard which is identical to that of IMO A.861, IMO MSC.163, IEC 61996 and IEC 61996-2 is formatted in italics, and the Regulation and associated performance standard paragraph numbers are indicated in brackets, where necessary.

Ships and marine technology - Guidelines for the operation and installation of voyage data recorders (VDR)

GJB 5484-2005 舰载火控激光测距仪规范

本规范规定了舰载火控激光测距仪的要求、质量保证规定和交货准备等内容。 本规范适用于舰载火控测距仪（以下简称产品）的设计、制造和验收。

Specificationg for laser rangefinder of ship-borne fire control

JIS F 8076:2005 船舶电气设施.第504部分:特项.控制和仪器仪表

この規格は，彫1に用いる制御，監視，警報及び保護システムに使用する電気，電子及びプログラマプル装置に適用する。

Electrical installations in ships -- Part 504: Special features -- Control and instrumentation

JB/T 5792-2005 船用交流起锚机自动系泊绞车控制箱

本标准规定了船用交流起锚机控制箱和自动系泊绞车控制箱(以下简称控制箱)的范围、分类、技术要求、试验方法、检验规则、包装、运输及贮存等内容。 本标准适用于交流5OHz、380V或6OHz、440V起锚机、起锚绞盘、绞缆绞车、起锚系泊组合机、自动系泊绞车等设备控制箱的设计、制造和检验。

Switchgear cubicles for a.c. windlasses and automatic mooring winches in ships

SAE J1320-2004 船用电气开关

1. Scope—This SAE Recommended Practice covers the requirements for switches used in marine applicationsboth under and over 50 V.1.1 Purpose—To recommend a test procedure whereby a switch can be evaluated and tested to give acceptablereliability in the marine environment and usage.

Marine Electrical Switches

HJB 293-2004 海军靶场测控设备代号命名方法

Nomenclature of Naval Range Measurement and Control Equipment Code Name

JIS F 7004:2003 造船.机械空间的温度计.配置和安装

この規格は，船の機関部の温度計の種類，用途及び目盛並びに装備箇所について規定する。

Shipbuilding -- Thermometers in machinery space -- Arrangement and installation

BS ISO 16329:2003 船舶和海上技术.高速船舶的航向控制系统

This International Standard specifies the structure, performance, inspection and testing of heading control systems to be installed on board craft operating under the following conditions: a) speed exceeding 30 kn and up to 70 kn; b) maximum rate of turn 20°/s; c) normal range of operation between 70°N and 70°S should, as required by chapter 13 of the HSC Code, comply with the minimum performance requirements specified in these standards. This International Standard applies to the heading control systems which enable a craft to keep a preset heading with minimum operation of the craft's steering gear, within limits related to the craft's manoeuvrability in conjunction with their sources of heading information. This International Standard assumes the use of a conventional arrangement. Where other arrangements are provided, the requirements of this standard should apply insofar as they are applicable, and appropriate justification provided where deviation from the requirements is necessary. The heading control systems should, within a speed range of up to 30 knots, comply with resolution A.342(IX), and within a speed range of 30 knots to 70 knots should comply with the requirements of this resolution. NOTE 1 All requirements that are extracted from the recommendations of IMO Resolutions [Resolution A.822(19) on performance standards for automatic steering aids for high-speed craft, A.694(17) and A.342(IX)] are printed in italics. NOTE 2 The heading control system was previously called "automatic steering aids (automatic pilot)". NOTE 3 Resolution A.342(IX) represents Resolution A.342(IX) as amended by MSC.64(67), Annex 3.

Ships and marine technology - Heading control systems for high-speed craft

IEEE 45-2002 船上电气设备的推荐实施规程

Establishes the minimally acceptable guidelines for the design, selection, and installation of systems and equipment aboard marine vessels applying electrical apparatus for power, propulsion, steering, automation, navigation, lighting, and communications.

Recommended Practice for Electrical Installations on Shipboard

JT/T 479-2002 内河船舶柴油机推进系统电动遥控装置技术要求

本标准规定了内河船舶柴油机主推进装置电动遥控系统的环境条件、基本功能和技术性能要求。 本标准适用于电动遥控系统的设计、制造与验收。

General technical requirements of electric remote control device for main propeller of diesel engine for inland-waterways vessels

BS IEC 60092-504:2002 船用电气装置.专用装置.控制和仪表装置

This part of IEC 60092 deals with electrical, electronic and programmable equipment intended for control, monitoring, alarm and protection systems for use in ships.

Electrical installation in ships. Special features. Control and instrumentation

BS IEC 60092-302:2002 船舶电气设施.低压开关设备和控制设备组件

Replacement This part of IEC 60092 is applicable to low-voltage switchgear and controlgear assemblies [type-tested assemblies (TTA), partially type-tested assemblies (PTTA) and non type-tested assemblies (NTTA)], with rated voltages not exceeding 1000 V a.c. at rated frequencies not exceeding 60 Hz or 1500 V d.c. for use in ships as a supplement to IEC 60439-1. NOTE - Throughout this standard, the word ASSEMBLY is used for a low-voltage switchgear and controlgear assembly. This standard also applies to ASSEMBLIES incorporating control and/or power equipment, which operate at higher frequencies. In this case, appropriate additional requirements apply. Unless otherwise specified in the following clauses, all ASSEMBLIES and their components comply with IEC 60439-1. In case of doubt, IEC 60092 publications shall have preference over IEC 60439-1.

Electrical installation in ships - Low-voltage switchgear and controlgear assemblies

CB/T 3778 修改单1-2001 测深装置元件 修改单1

Amendment sheet for sounding device components 1

DIN EN 60092-507:2001 船用电气装置.第507部分:游艇

Electrical installations in ships - Part 507: Pleasure craft (IEC 60092-507:2000); German version EN 60092-507:2000