共找到 70 条与 水声设备 相关的标准,共 5 页
本部分规定了水面舰艇回声声纳的修理技术质量要求和检查验收条件。 本部分适用于水面舰艇回声声纳的修理和检验。
Technical requirements of maintenance for ship-based sonar equipment.Part 2: Surface ship's active sonars
本部分规定了通信声纳的修理技术质量要求和检查验收条件。 本部分适用于通信声纳的修理和检验。
Technical requirements of maintenance for ship-based sonar equipment.Part 4: Communication sonars
本部分规定了系统显控台的修理技术质量要求和检查验收条件。 本部分适用于系统显控台的修理和检验。
Technical requirements of maintenance for ship-based sonar equipment.Part 7: System displays
이 규격은 IMO Resolution A.224(VII)에서 채택한 성능 표준에 적합하도
Ships and marine technology-Marine echo-sounding equipment
이 규격은 다음 사항에 대하여 적용한다.ㆍ펄스 또는 연속파 형태로 초음파 기기에 의해
Ultrasonics-Hydrophones-Characteristics and calibration in the frequency range from 15 MHz to 40 MHz
この規格は,IMO決議A.224 (VⅡ)に適台することを要求される船用音響測深装置(以下,装置という。)の最低の動作及び性能要件,試験方法及び試験結果を規定する。IMO決議A.224 (VⅡ)に加えて,IMO決議A.694(17)を考慮してIEC 60945に関連付けている。
Ships and marine technology -- Marine echo-sounding equipment
MIL-G-51478B remains inactive for new design, however, the document is valid for use.
GRENADE, LAUNCHER, SMOKE: SCREENING, RP, UK L8A3
MIL-L-51450A remains inactive for new design, however, the document is valid for use.
LAUNCHER, PROJECTILE, 64 MM - M234
MIL-L-51292C remains inactive for new design, however, the document is valid for use.
LAUNCHER AND GRENADES, SMOKE, HC AND WP, XM176
MIL-L-51293B remains inactive for new design, however, the document is valid for use.
LAUNCHER AND GRENADES, SMOKE, HC AND WP, XM176, COMPONENTS FOR
This specification covers the requirements for two types of acoustical transmission loss barrier material (see 6.1).
ACOUSTICAL TRANSMISSION LOSS BARRIER MATERIAL
This international Standard specifies the minimum operational and performance requirements,methods of testing and test results of marine echo-sounding equipment required to comply with the performance standards adopted by the IMO Resolution A.224(VII).In addition,it takes account of IMO Resolution A.694(17) and is associated with IEC 60945. When a requirement in this international Standard is different from IEC 60945, the requirement in this international Standard takes precedence. The purpose of echo-sounding equipment is to provide reliable information on the deqth of water under a ship to aid navigation in particular in shallow water. This Internation Standard is applicable for ship speeds from 0 kn to 30 kn. Any text in this international Standard with wording identical to that in the IMO Resolution A.224(VII) and IMO Res.A.694(17)is printed in italics.
Ships and marine technology. Marine echo-sounding equipment
This International Standard is applicable to · hydrophones employing piezoelectric sensor elements, designed to measure the pulsed and continuous-wave ultrasonic fields generated by ultrasonic equipment; · hydrophones used for measurements made in water and in the frequency range between 15 MHz and 40 MHz; · hydrophones with or without an integral amplifier; · hydrophones with a circular piezoelectrically active element. This International Standard specifies · relevant hydrophone characteristics; · methods of determining directional response and hydrophone sensitivity based on relative or comparative measurements; and describes · absolute hydrophone calibration methods. Recommendations and references to accepted literature are made for the various relative and absolute calibration methods in the frequency range covered by this International Standard.
Ultrasonics - Hydrophones - Characteristics and calibration in the frequency range from 15 MHz to 40 MHz
This International Standard specifies the minimum operational and performance requirements, methods of testing and test results of marine echo-sounding equipment required to comply with the performance standards adopted by the IMO Resolution A.224(VII). In addition, it takes account of IMO Resolution A.694(17) and is associated with EC 60945. When a requirement in this International Standard is different from IEC 60945, the requirement in this International Standard takes precedence. The purpose of echo-sounding equipment is to provide reliable information on the depth of water under a ship to aid navigation in particular in shallow water. This International Standard is applicable for ship speeds from 0 kn to 30 kn. Any text in this International Standard with wording identical to that in the IMO Resolution A.224(VII) and IMO Res. A.694(17) is printed in italics. NOTE Resolution A.224(VII) represents Resolution A.224(VII) as amended by Resolution MSC.74(69), annex 4.
Ships and marine technology - Marine echo-sounding equipment
本规范规定了舰艇用回声声呐设备的要求、质量保证规定和交货准备等。 本规范适用于舰艇用回声声呐设备的研制、生产和验收。
General specification for active sonar of naval ship
本规范规定了手提声呐的要求,质量保证及交货准备等。 本规范适用于潜水员使用的手提声呐的研制、生产和使用。
Specification for handle-sonar
Shipbuilding -- Marine echo-sounding equipment
Ships and marine technolgy - Marine echo-sounding equipment
本标准规定了水声设备用低压直流稳压电源的基本参数、技术要求 、测量方法及检验规则等。 本标准适用于水声设备中采用的各种稳压电源,对于非水声设备采用的稳压电源,也可参照使用。
Specifications for low-voltage DC regulated power supply for underwater acoustic equipment
This commercial item description covers brown kraft paper used for general wrapping applications.
LAUNCHER AND GRENADES, SMOKE, HC AND WP, XM176
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号