W58 线 、带、绳 标准查询与下载
共找到 554 条与 线 、带、绳 相关的标准，共 37 页
Tow ropes for passenger cars; requirements, testing, inspection, Corrigendum to DIN 76033:1993-06
- ICS
- 59.080.50
- CCS
- W58
- 发布
- 2013-01
- 实施
本标准规定了锦纶长丝邦迪缝纫线产品的术语和定义、要求、分等规定、试验方法、验收规则、包装、标志、运输和贮存。 本标准适用于锦纶长丝邦迪缝纫线（包括内邦和外邦锦纶长丝缝纫线）。
Polyamide bonded sewing thread
- ICS
- 59.080.20
- CCS
- W58
- 发布
- 2012-12-28
- 实施
- 2013-06-01
이 표준은 비닐론 방적사 및 폴리에스터 혼방 비닐론 방적사를 사용한 비닐론 로프(이하 로프
Vinylon ropes
- ICS
- 59.080.50
- CCS
- W58
- 发布
- 2012-12-28
- 实施
- 2012-12-28
이 표준은 폴리올레핀 농업용 합연사의 주요 특성과 특성을 확인하기 위한 시험 방법, 합연사
Polyolefin agricultural twines
- ICS
- 59.080.50
- CCS
- W58
- 发布
- 2012-12-28
- 实施
- 2012-12-28
Fibre ropes - Polyamide - 3-, 4-, 8- and 12- strand ropes (ISO 1140:2012); German version EN ISO 1140:2012
- ICS
- 59.080.50
- CCS
- W58
- 发布
- 2012-11
- 实施
Fibre ropes - Polyester - 3-, 4-, 8- and 12-strand ropes (ISO 1141:2012); German version EN ISO 1141:2012
- ICS
- 59.080.50
- CCS
- W58
- 发布
- 2012-11
- 实施
Fibre ropes - Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high-tenacity multifilament (PP3) - 3-, 4-, 8- and 12- strand ropes (ISO 1346:2012); German version EN ISO 1346:2012
- ICS
- 59.080.50
- CCS
- W58
- 发布
- 2012-11
- 实施
Fibre ropes - Polyamide - 3-, 4-, 8- and 12- strand ropes.
- ICS
- 59.080.50
- CCS
- W58
- 发布
- 2012-10-01
- 实施
- 2012-10-12
Fibre ropes - Polyester - 3-, 4-, 8- and 12-strand ropes.
- ICS
- 59.080.50
- CCS
- W58
- 发布
- 2012-10-01
- 实施
- 2012-10-12
Fibre ropes. Polyamide. 3-, 4-, 8- and 12-strand ropes
- ICS
- 59.080.50
- CCS
- W58
- 发布
- 2012-08-31
- 实施
- 2012-08-31
Fibre ropes. Polyester. 3-, 4-, 8- and 12-strand ropes
- ICS
- 59.080.50
- CCS
- W58
- 发布
- 2012-08-31
- 实施
- 2012-08-31
This International Standard specifies requirements for 3-strand hawser-laid and 4-strand shroud-laid ropes, 8-strand braided ropes and 12-strand braided ropes for general service made of polyamide, and gives rules for their designation.
Fibre ropes - Polyamide - 3-, 4-, 8- and 12-strand ropes
- ICS
- 59.080.50
- CCS
- W58
- 发布
- 2012-08
- 实施
This International Standard specifies requirements for 3-strand hawser-laid and 4-strand shroud-laid ropes, 8-strand braided ropes and 12-strand braided ropes for general service made of polyester, and gives rules for their designation.
Fibre ropes - Polyester - 3-, 4-, 8- and 12-strand ropes
- ICS
- 59.080.50
- CCS
- W58
- 发布
- 2012-08
- 实施
This International Standard specifies requirements for 3-strand hawser-laid and 4-strand shroud-laid ropes, 8-strand braided ropes and 12-strand braided ropes for general service made of polypropylene, and gives rules for their designation.
Fibre ropes - Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high-tenacity multifilament (PP3) - 3-, 4-, 8- and 12-strand ropes
- ICS
- 59.080.50
- CCS
- W58
- 发布
- 2012-08
- 实施
Fibre ropes for offshore stationkeeping - High modulus polyethylene (HMPE)
- ICS
- 59.080.50
- CCS
- W58
- 发布
- 2012-05
- 实施
Test Method D1907 is considered satisfactory for acceptance testing of commercial shipments, since it has been used extensively in the trade for that purpose. In case of dispute arising from differences in reported test results when using Test Method D1907 for acceptance testing of commercial shipments, the purchaser and the supplier should conduct comparative tests to determine if there is a statistical bias between their laboratories. Competent statistical assistance is recommended for the determination of such a bias. As a minimum, the two parties should take a group of test specimens that are as homogeneous as possible, and that are from the same lot of the material in question. The test specimens should then be randomly assigned in equal numbers to each laboratory for testing. The average results from the two laboratories should be compared using statistical analysis for unpaired data, and an acceptable probability level chosen by the parties before testing begins. If a bias is found, either its cause must be identified and corrected, or the purchaser and supplier must agree to interpret future test results for that material with consideration to the known bias. This test method is intended primarily for the determination of the average linear density of yarns. However, the variations identified by the results may also provide useful information. If the coefficient of variation is to be calculated, each skein must be weighed separately, and a larger number of skeins will need to be tested (as compared to the number of skeins to be tested for the determination of the average yarn linear density alone). This test method includes seven options, depending on whether the yarn is scoured before weighing, weighed in the conditioned or oven-dried state, or whether or not the results obtained are adjusted for commercial moisture regain, or a commercial allowance. Option 1 (unscoured, conditioned yarn) is generally used for yarns spun on the cotton system, while Options 6 and 7 (scoured, oven dried yarn, plus commercial moisture regain, or allowance) are generally used for filament yarns, or yarns containing wool fibers. The specific options to be used in any instance shall be agreed upon by the parties, or as prescribed in test methods or tolerances. In Options 2, 3, 5, 6, and 7, an oven-dried sample is obtained by exposing the yarn in an oven with a supply of air at standard textile testing conditions, as described in 6.3.1.1 This test method covers the determination of the linear density of all types of yarn in package form, subject to the limitations of size and stretch given in 1.2 and 1.3. Provision is made for expressing yarn linear density in all the traditional yarn numbering systems. 1.2 This test method is applicable to yarns that stretch less than 5 % when tension on the yarn is increased from 0.25 to 0.75 cN/tex [0.25 to 0.75 gf/tex]. By mutual agreement, and use of a lower than specified reeling tension, this method may also be adapted to measure the linear density of yarns that stretch more than 5 %, under the above force. 1.3 This method is applicable to yarns finer than 2000 tex. However, it may be also adapted to coarser yarns by the use of skeins of shorter than specified lengths, and alternate reeling conditions, agreeable to the interested parties. 1.4 Depending on the procedure used to calculate the moisture content of the yarn being tested, and its actual moisture content, or finish content, or both, one or more of the following options may be utilized. 1.4.1 Unscoured Yarn: Option 1Yarn at equilibrium with the standard atmosphere for testing textiles.Option 2Oven-dried yarn.Option 3
Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
- ICS
- 59.080.20
- CCS
- W58
- 发布
- 2012
- 实施
이 표준은 폴리아마이드로 만들어진 이중 브레이드 로프와 고강도 이중 브레이드 로프의 요구사
Polyamide fibre ropes－Double braid construction
- ICS
- 59.080.50
- CCS
- W58
- 发布
- 2011-12-29
- 实施
- 2011-12-29
이 표준은 폴리에스터로 만들어진 이중 브레이드 로프와 고강도 이중 브레이드 로프의 요구사항
Polyester fibre ropes－Double braid construction
- ICS
- 59.080.50
- CCS
- W58
- 发布
- 2011-12-29
- 实施
- 2011-12-29
이 표준은 고탄성률 폴리에틸렌(HMPE)으로 만들어진 8-스트랜드(strand) 브레이드
Fibre ropes－High modulus polyethylene－8-strand braided ropes,12-strand braided ropes and covered ropes
- ICS
- 59.080.50
- CCS
- W58
- 发布
- 2011-12-29
- 实施
- 2011-12-29
이 표준은 폴리에스터와 폴리올레핀을 결합해 만든 3-스트랜드(strand) 호저 레이드(h
Fibre ropes of polyester/polyolefin dual fibres
- ICS
- 59.080.50
- CCS
- W58
- 发布
- 2011-12-29
- 实施
- 2011-12-29
