共找到 306 条与 纺织机械零部件 相关的标准,共 21 页
이 표준은 제직 준비뿐만 아니라 제직에 사용하는 경사 빔에 대한 주요 치수, 기계적 강도, 형상 및위치에 대한 허용 오차를 규정한다. 또한 경사 빔 프로파일 스레드의 주요 치수 및 빔의 자동 교체를 위한 연결 부분을 명시한다.
Textile machinery and accessories ― Beams for winding ― Part 3: Weaver
이 표준은 HZ링 및 J링의 주요 치수 및 질량, 공차 또는 링 정방과 링 연사기에 사용되는 HZ링 및J링 전용 트래블러의 질량과 그 공차를 규정한다. 또한 트래블러의 호칭에 대하여 규정한다.
Textile machinery and accessories ― Rings and travellers for ring spinning and ring doubling frames ― Part 2: HZCH-, HZ- and J-rings and their appro
이 표준은 T/SF링의 주요 치수 및 링 정방과 링 연사기에 사용되는 플랜지 링 전용 트래블러의 질량과 그 공차를 규정한다. 또한 트래블러의 호칭에 대하여 규정한다.
extile machinery and accessories ― Rings and travellers for ring spinning and ring doubling frames ― Part 1: T-rings and their appropriate traveller
이 표준은 섬유산업에 사용되는 KS B ISO 93-1에 규정된 원통형 슬라이버 캔에서 사용되는 스프링밑부분의 주요 특징을 초기 장력의 유무에 관계 없이 규정한다.
Textile machinery and accessories ― Cylindrical sliver cans ― Part 2: Spring bottoms
이 표준은 롤러 덮개(합성 피복)의 주요 치수를 규정한다. 이는 방적 준비기계 및 방적기계에 적용할수 있다.
Textile machinery and accessories ― Spinning preparatory and spinning machinery ― Main dimensions of coverings for top rollers
Textile machinery -- Weaving machine temples -- Part 1: Temple cylinders
Test methods for mesh rings for compact spinning - Part 2: Porosity
이 표준은 섬유 산업에 사용되는 원통형 슬라이버 캔의 주요 치수를 규정한다.
Textile machinery and accessories ― Cylindrical sliver cans ― Part 1: Main dimensions
本标准规定了纺织用回转式水过滤器的术语和定义、分类和参数、要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于对纺织空调喷淋系统、制冷系统,进行纤尘物过滤的纺织用回转式水过滤器(以下简称“水过滤器”)。
Rotation water filters for textile
Textile machinery and accessories - Bars for drop wires for electrical warp stop motions (ISO 13435:2011)
本标准规定了转杯纺纱机减震套(以下简称“减震套”)的分类、参数和标记、要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于转杯纺纱机的转杯用减震套。
Rotor type open-end spinning machine.Resilient mounting
本标准规定了转杯纺纱机压轮轴承(以下简称"压轮轴承")的分类、参数和标记、要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于转杯纺纱机对龙带起压紧、支撑和导向作用的压轮的轴承。
Rotor type open-end spinning machine.Press pulley bearings
本标准规定了纺织机械、器材行业生产过程的防锈和成品防锈的技术规程。 本标准适用于纺织机械、器材产品生产工序间的防锈和成品防锈。
Technical specification of the rust prevention in process and for products
本标准规定了环锭细纱机用导纱钩的术语和定义、分类和标记、要求、试验方法、检验规则和包装、标志、运输、储存。 本标准适用于环锭细纱机用导纱钩(以下简称“导纱钩”)。
Guiding wire for ring spinning frame
本标准规定了平面钢领的分类和标记、要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于环锭细纱机和捻线机的钢领。
Plane ring
本标准规定了环锭细纱机用导纱钩支承板的术语和定义、分类和标记、要求、试验方法、检验规则和包装、标志、运输、储存。 本标准适用于环锭细纱机用导纱钩支承板(以下简称“导纱板”)。
Supporting plate of guiding wire for ring spinning frame
This International Standard specifies the main dimensions, with tolerances, of rectangular sliver cans used in the textile industry. It also gives information about the right-angle position of cans according to ISO 1101.
Textile machinery - Sliver cans, rectangular - Main dimensions and tolerances (ISO 16853:2010)
Textile machinery and accessories - Reeds - Part 3: Dimensions and designation of metal reeds with double-spring baulk (ISO 366-3:2009)
Textile machinery and accessories - Reeds - Part 2: Dimensions and designation of metal reeds with plate baulk (ISO 366-2:2009)
Textile machinery and accessories - Rings and travellers for ring spinning and ring twisting frames - Part 1: Flange rings T and SF and their travellers (ISO 96-1:2009)
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号