W93 纺部机械与器具 标准查询与下载

FZ/T 92040-2009 钢板槽筒

本标准规定了钢板槽筒的产品代号及基本结构参数、要求、导纱试验、检验规则、标志、包装、运输、贮存。 本标准适用于GC型钢板槽筒，即普通络筒机用的钢板槽筒。 本标准不适用于对外技术交流或对外贸易验收。

Steel plate grooved drum

FZ/T 93046-2009 棉精梳机

本标准规定了棉精梳机的分类与基本参数、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于棉精梳工序的精梳机。

Comber for cotton

FZ/T 93045-2009 条并卷机

本标准规定了条并卷机的基本参数、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于棉精梳工序的条并卷机。

Lap formers

DIN ISO 26243:2009 短纤维纺丝卡.词汇和制作原则(ISO 26243:2007),德文和英文文本

This International Standard specifies terms and definitions for the card with regard to spinning procedure for cotton and other staple fibres.

Card for staple fibres spinning - Vocabulary and principles of construction (ISO 26243:2007); Text in German and English

NF G46-002-2/A1*NF EN ISO 9902-2/A1:2009 纺织机械.噪声试验规程.第2部分:纺纱准备机和纺纱机械.修改件1

Textile machinery - Noise test code - Part 2 : spinning preparatory and spinning machinery - Amendment 1.

ISO 11111-4:2005/Amd 1:2009 纺织机械.安全性要求.第4部分:纱线加工,绳索加工机械.修改件1

Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery; Amendment 1

ISO 11111-2:2005/Amd 1:2009 纺织机械.安全性要求.第2部分:纺前预处理机械和纺纱机械.修改件1

Textile machinery - Safety requirements - Part 2: Spinning preparatory and spinning machines; Amendment 1

BS ISO 28239:2008 纺织机械.短纤维制备用开棉机和清棉机.词汇表和结构原理

Textile machinery - Opener and cleaner for staple fibres preparation - Vocabulary and principles of construction

FZ/T 92076-2008 弹性针布用底布

本标准规定了弹性针布用底布的术语和定义、分类和标记、要求、试验方法、检验规则和包装、标志、储存。 本标准适用于纺织生产中梳理纤维的弹性针布用底布（以下简称“底布”）。

Foundation for fillet clothing

FZ/T 92074-2007 托锭粗纱锭翼

Spindle roving flyer

FZ/T 93066-2007 梳棉机用齿条盖板针布

本标准规定了梳棉机用齿条盖板针布（以下简称“齿条盖板针布”）的术语和定义、分类与标记、要求、试验方法、检验规则、包装、标志、运输和储存。 本标准适用于固定在梳棉机锡林前、后和刺辊上、下的齿条盖板针布。

Top wire clothings for carding machines

FZ/T 92036-2007 弹簧加压摇架

本标准规定了弹簧加压摇架（以下简称摇架）的产品分类、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于各类粗、细纱摇架。

Spring weighting arms

FZ/T 92073-2007 托锭粗纱锭子

本标准规定了托锭粗纱锭子的产品分类、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于棉、毛、绢、苎麻、化纤纯纺或混纺的托锭粗纱机用粗纱锭子（以下简称锭子）。

Spindle for fly frame

FZ/T 93030-2007 纺织机械与附件 交叉卷绕用圆锥形筒管 技术条件

本标准规定了交叉卷绕用圆锥形筒管的要求、试验方法、检验规则、包装和标志。 本标准适用于半锥角为 3°30′4°20′、5°57′，绕纱宽度不超过 l-25mm 的交叉卷绕用圆锥形筒管（以下简称“锥形管”）。

Textile machinery and accessories-Cones for cross winding- Technology terms

BS ISO 368:2006 纺前准备、纺和并(捻)机械.锥体为1:38和1:64的环锭纺、并、捻锭子用纱管

This International Standard specifies the dimensions (length and inner diameter) and permissible total run-outof tubes with taper 1:38 and 1:64 for ring-spinning, doubling and twisting spindles used in the textile industry.It also specifies the dimensions and tolerances of the gauges for checking the tubes.

Spinning preparatory, spinning and doubling (twisting) machinery - Tubes for ring-spinning, doubling and twisting spindles, taper 1:38 and 1:64

ISO 21485:2006 纺织机械.棉花纺纱用并条机.词汇和结构原理

This International Standard establishes a vocabulary of terms related to, and the principles of construction of, draw frames and their components, used for cotton spinning in the textile industry. NOTE 1 The draw frame design is not required to conform with the figures shown in this International Standard, which are given only as examples of the different types. NOTE 2 In addition to terms used in English, one of the three official ISO languages, this document gives the equivalent terms in German; these are published under the responsibility of the member body for Germany (DIN), and are given for information only. Only the terms and definitions given in the official language can be considered as ISO terms and definitions.

Textile machinery - Draw frame for cotton spinning - Vocabulary and principles of construction

DIN ISO 93-1:2006 纺织机械和附件.圆柱形条筒.第1部分:主要尺寸

This part of ISO 93 specifies the main dimensions of cylindrical sliver cans used in the textile industry.

Textile machinery and accessories - Cylindrical sliver cans - Part 1: Main dimensions (ISO 93-1:2006) English version of DIN ISO 93-1:2006-09

DIN ISO 93-2:2006 纺织机械和附件.圆筒形条筒.第2部分:弹簧底(ISO 93-2:1998)

This part of ISO 93 specifies the principal features of spring bottoms — with and without pre-tension — for cylindrical sliver cans, as specified in ISO 93-1, used in the textile industry.

Textile machinery and accessories - Cylindrical sliver cans - Part 2: Spring bottoms (ISO 93-2:2006) English version of DIN ISO 93-2:2006-09

DIN ISO 363-2:2006 纺织机械与附件.闭口综耳扁钢综.第2部分:硬质带钢制成的综片尺寸

This part of ISO 363 specifies the main dimensions and tolerances of flat steel healds with closed end loop! (0-shaped end loops), manufactured of hardened strip steel for use in the textile industry.

Textile machinery and accessories - Flat steel healds with closed end loops - Part 2: Dimensions of healds manufactured of hardened strip steel (ISO 363-2:2006) English version of DIN ISO 363-2:2006-09

DIN ISO 368:2006 纺前准备、纺和并(捻)机械.锥度为1:38和1:64的环锭纺纱、并、捻锭子用纱管

This International Standard specifies the dimensions (length and inner diameter) and permissible total run-out of tubes with taper 1:38 and 1:64 for ring-spinning, doubling and twisting spindles used in the textile industry. It also specifies the dimensions and tolerances of the gauges for checking the tubes.

Spinning preparatory, spinning and doubling (twisting) machinery - Tubes for ring-spinning, doubling and twisting spindles, taper 1:38 and 1:64 (ISO 368:2006) English version of DIN ISO 368:2006-09