Y11 钟表 标准查询与下载
共找到 469 条与 钟表 相关的标准，共 32 页
This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric clocks having a rated voltage not more than 250 V.
Household and similar electrical appliances - Safety Part 2-26: Particular requirements for clocks
- ICS
- 13.120;97.040.50
- CCS
- Y11
- 发布
- 2003-08-27
- 实施
- 2003-08-27
To be read in conjunction with BS EN 60335-1
Specification for safety of household and similar electrical appliances - Particular requirements for clocks
- ICS
- 39.040.20
- CCS
- Y11
- 发布
- 2003-08-27
- 实施
- 2003-08-27
This part of ISO 3160 specifies methods to determine fineness, thickness, corrosion resistance and adhesion for gold alloy coverings on watch-cases and accessories, including bracelets when they are permanently attached to the case. The tests apply only to significant surfaces. This part of ISO 3160 applies to all gold alloy coverings specified in ISO 3160-1.
Watch-cases and accessories - Gold alloy coverings - Determination of fineness, thickness, corrosion resistance and adhesion
- ICS
- 39.040.10
- CCS
- Y11
- 发布
- 2003-08-08
- 实施
- 2003-08-08
This International Standard specifies the procedure for evaluating the accuracy of quartz watches, individually and by lots, and the relationship between the accuracy tested and the accuracy classification given by the manufacturer. It applies to quartz watches having accompanying documents on which the accuracy classification is indicated.
Horology - Procedure for evaluating the accuracy of quartz watches
- ICS
- 39.040.10
- CCS
- Y11
- 发布
- 2003-08-08
- 实施
- 2003-08-08
Horology - Magnetic resistant watches.
- ICS
- 39.040.10
- CCS
- Y11
- 发布
- 2003-05-01
- 实施
- 2003-05-20
This is Technical Corrigendum 1 to ISO 6426-2-2002 (Horological vocabulary — Part 2: Technical and commercial definitions)
Horological vocabulary - Part 2: Technical and commercial definitions; Technical Corrigendum 1
- ICS
- 39.040.01;01.040.39
- CCS
- Y11
- 发布
- 2003-04
- 实施
この規格は，一般用の時計の部品名称について規定する。
Nomenclature for parts of watches and clocks
- ICS
- 01.040.39;39.040.01
- CCS
- Y11
- 发布
- 2003-03-20
- 实施
This International Standard specifies the procedure for evaluating the accuracy of quartz watches, individually and by lots, and the relationship between the accuracy tested and the accuracy classification given by the manufacturer. It applies to quartz watches having accompanying documents on which the accuracy classification is indicated.
Horology - Procedure for evaluationg the accuracy of quartz watches
- ICS
- 39.040.10
- CCS
- Y11
- 发布
- 2003-03
- 实施
This part of ISO 3160 specifies methods to determine fineness, thickness, corrosion resistance and adhesion for gold alloy coverings on watch-cases and accessories, including bracelets when they are permanently attached to the case. The tests apply only to significant surfaces. This part of ISO 3160 applies to all gold alloy coverings specified in ISO 3160-1.
Watch-cases and accessories - Gold alloy coverings - Part 2: Determination of fineness, thickness, corrosion resistance and adhesion
- ICS
- 39.040.10
- CCS
- Y11
- 发布
- 2003-02
- 实施
Timekeeping instruments - Conditions for carrying out checks on radioluminescent deposits.
- ICS
- 39.040.01
- CCS
- Y11
- 发布
- 2003-01-01
- 实施
- 2003-01-20
Covers electrically-operated clocks that form parts of a master clock system; secondary, cost, payroll, and other clocks intended primarily for industrial installations; and time stamps, job-card recorders, timers, and similar time indicating and recording appliances. These appliances are intended for use on circuits of 300 volts or less in accordance with the National Electrical Code, ANSI/NFPA 70.
Time-Indicating and -Recording Appliances
- ICS
- 39.040.99
- CCS
- Y11
- 发布
- 2003
- 实施
Horological vocabulary. Technical and commercial definitions
- ICS
- 01.040.39;39.040.01
- CCS
- Y11
- 发布
- 2002-10-23
- 实施
- 2002-10-23
This International Standard deals with the safety of electric clocks having a rated voltage not more than 250 V. NOTE 101? Examples of appliances that are within the scope of this standard are??C alarm clocks;??C spring-driven clocks with an electrically operated winding mechanism;??C clocks incorporating driving means other than motors. As far as is practicable@ this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However@ in general@ it does not take into account??C the use of appliances by young children or infirm persons without supervision;??C playing with the appliance by young children. NOTE 102? Attention is drawn to the fact that??C for appliances intended to be used in vehicles or on board ships or aircraft@ additional requirements may be necessary;??C in many countries additional requirements are specified by the national health authorities@ the national authorities responsible for the protection of labour and similar authorities. NOTE 103 ?This standard does not apply to??C battery-operated clocks;??C appliances intended exclusively for industrial purposes;??C appliances intended to be used in locations where special conditions prevail@ such as the presence of a corrosive or explosive atmosphere (dust@ vapour or gas);??C clocks having other functions@ whether or not in combination with time indication@ such as master control clocks and timers for cooking ranges@ washing machines and similar appliances;??C clocks for "clocking-in" purposes;??C clocks incorporating electronic circuits only (IEC 60065).
Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks
- ICS
- 39.040.20
- CCS
- Y11
- 发布
- 2002-10
- 实施
- 2008-07-16
本标准规定了皮革表带的产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于以各种天然皮革和人造革为原材料制造的手表表带，其他以非金属为原材料制造的表带亦可参照使用。
Leather bracelets
- ICS
- CCS
- Y11
- 发布
- 2002-09-21
- 实施
- 2002-12-01
本标准规定了功能和非功能钟表宝石的技术定义，阐述了所使用的不同类型的宝石及如何在计时仪器上标志或在广告中使用。
Horology ---- Functional and non-functional jewels
- ICS
- CCS
- Y11
- 发布
- 2002-09-21
- 实施
- 2002-12-01
GB／T 9820的本部分定义了用于钟表工业的主要技术和商业术语。 本部分适用于计时仪器和相关装置。
Horological vocabulary - Part 2: Technical and commercial definitions
- ICS
- 01.040.39;39.040.01
- CCS
- Y11
- 发布
- 2002-09
- 实施
This International Standard specifies the minimum requirements and test methods for magnetic resistant watches. It is based on the simulation of an accidental exposure of a watch to a direct current magnetic field of 4 800 A/m. Annex A deals with watches designated as magnetic resistant with an additional indication of intensity of a magnetic field exceeding 4 800 A/m.
Horology - Magnetic resistant watches
- ICS
- 39.040.10
- CCS
- Y11
- 发布
- 2002-08-16
- 实施
- 2002-08-16
This International Standard specifies the conditions in which checks on radioluminescent deposits for timekeeping instruments are to be carried out.It supplements ISO 3157, in particular clause 4 of that document, "Specifications and test methods for radioluminescent deposits".
Timekeeping instruments - Conditions for carrying out checks on radioluminescent deposits
- ICS
- 39.040.01
- CCS
- Y11
- 发布
- 2002-08-01
- 实施
- 2002-08-01
This International Standard specifies the minimum requirements and test methods for magnetic resistant watches. It is based on the simulation of an accidental exposure of a watch to a direct current magnetic field of 4 800 A/m. Annex A deals with watches designated as magnetic resistant with an additional indication of intensity of a magnetic field exceeding 4 800 A/m.
Horology - Magnetic resistant watches
- ICS
- 39.040.10
- CCS
- Y11
- 发布
- 2002-07
- 实施
