Y22 日用玻璃制品 标准查询与下载

ISO 9100-1:2005 玻璃容器.真空凸缘瓶口.第1部分:总则

This document specifies the types of vacuum lug finishes for glass containers for prEN ISO 9100-2 to EN ISO 9100-14.

Glass containers - Vacuum lug finishes - Part 1: General

ISO 9100-9:2005 玻璃容器.真空凸缘瓶口.第9部分:深度为63、66和70

This document specifies the dimensions of vacuum lug finishes with nominal sizes of 63, 66 and 70 mm deep for wide-mouth glass containers.

Glass containers - Vacuum lug finishes - Part 9: 63, 66 and 70 deep

ISO 9100-13:2005 玻璃容器.真空凸缘瓶口.第13部分:普通规格100

This document specifies the dimensions of a vacuum lug finish with a nominal size of 100 mm regular for wide-mouth glass containers.

Glass containers - Vacuum lug finishes - Part 13: 100 regular

ISO 9100-12:2005 玻璃容器.真空凸缘瓶口.第12部分:普通规格89

This document specifies the types of vacuum lug finishes for glass containers for prEN ISO 9100-2 to EN ISO 9100-14.

Glass containers - Vacuum lug finishes - Part 12: 89 regular

ISO 9100-11:2005 玻璃容器.真空凸缘瓶口.第11部分:普通规格82

This document specifies the dimensions of a vacuum lug finish with a nominal size of 82 mm regular for wide-mouth glass containers.

Glass containers - Vacuum lug finishes - Part 11: 82 regular

ISO 9100-14:2005 玻璃容器.真空凸缘瓶口.第14部分:普通规格110

This document specifies the dimensions of a vacuum lug finish with a nominal size of 110 mm regular for wide-mouth glass containers.

Glass containers - Vacuum lug finishes - Part 14: 110 regular

ISO 9100-10:2005 玻璃容器.真空凸缘瓶口.第10部分:普通规格77

This document specifies the dimensions of a vacuum lug finish with a nominal size of 77 mm regular for wide-mouth glass containers.

Glass containers - Vacuum lug finishes - Part 10: 77 regular

ASTM C162-05 玻璃和玻璃制品的标准术语

1.1 This terminology defines terms generally used in the glass industry.1.2 In some cases in which a usage is specific to a ceertain industry, that is spelled out within the definition. For completeness and hisotrical purposes, terms that are outdated are listed as being archaic. The reader is cautioned that some companies or industries may define or use terms differently than the way these terms are defined within this terminology.1.3 Other sources of glass glossaries are Glass Association of North America's Glazing Manual, Engineering Standards Manual for Tempered Glass, Laminated Glass Design Guide,and ASTM Committee C-14 standards.

Standard Terminology of Glass and Glass Products

ASTM C735-04 可反复使用玻璃啤酒容器及饮料容器上陶瓷装饰耐酸性的标准试验方法

This test method evaluates the quality and serviceability of ceramic decorations on returnable beer and beverage containers. This test method is also suitable for specification acceptance. Its significance is that bottles with good acid resistance coatings have longer service life.1.1 This test method covers qualitative determination of the acid resistance of ceramic decorations on returnable beer and beverage containers, to assure the necessary durability of the decoration. 1.2 This test provides an indication of performance when and if the decoration is to be exposed to the acid solutions used in reclaiming bottles, and it also covers those instances where the beverages themselves have acidic properties. 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Acid Resistance of Ceramic Decorations on Returnable Beer and Beverage Glass Containers

ASTM C676-04 玻璃餐具上陶瓷装饰耐洗涤剂的标准试验方法

This test method provides a means of estimating the qualitative performance of glass enamel decorations that are exposed to high phosphate detergents during use. This test method also attempts to simulate accelerated exposure to high phosphate detergents prior to testing for heavy metal release, such as in Test Method C 927 when long term performance of enamels must be evaluated.1.1 This qualitative test method is designed to provide a convenient and reproducible method of determining the detergent resistance of decorations applied to glass tableware. 1.2 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Detergent Resistance of Ceramic Decorations on Glass Tableware

ASTM C162-04 玻璃和玻璃制品的标准术语

1.1 This terminology defines terms generally used in the glass industry.1.2 In some cases in which a usage is specific to a ceertain industry, that is spelled out within the definition. For completeness and hisotrical purposes, terms that are outdated are listed as being archaic. The reader is cautioned that some companies or industries may define or use terms differently than the way these terms are defined within this terminology.1.3 Other sources of glass glossaries are Glass Association of North America's Glazing Manual, Engineering Standards Manual for Tempered Glass, Laminated Glass Design Guide,and ASTM Committee C-14 standards.

Standard Terminology of Glass and Glass Products

ASTM C777-04 玻璃上陶瓷装饰耐硫化物作用的标准试验方法

1.1 This test method covers the qualitative determination of the sulfide resistance of ceramic decorations on glass in order to assure the necessary durability of the decoration. 1.2 This test method provides an indication of performance when and if the decorations are exposed to sulfide attack. 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.4 This test method generates hydrogen sulfide gas which is highly poisonous.

Standard Test Method for Sulfide Resistance of Ceramic Decorations on Glass

ASTM C777-04(2009) 玻璃上陶瓷装璜耐硫化物作用的试验方法

1.1 This test method covers the qualitative determination of the sulfide resistance of ceramic decorations on glass to assure the necessary durability of the decoration. 1.2 This test method provides an indication of performance when and if the decorations are exposed to sulfide attack. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.5 This test method generates hydrogen sulfide gas which is highly poisonous.

Standard Test Method for Sulfide Resistance of Ceramic Decorations on Glass

ASTM C1203-04(2009) 陶瓷玻璃釉层耐碱性定量测定试验方法

This test method is intended to be used when a quantitative measurement of the alkali durability of a ceramic-glass enamel is needed. The test is applicable to glass coated with fired enamels where exposure to strong alkalis, or alkalis at elevated temperatures might be encountered in service. This test method is intended to be an accelerated, destructive test. Results can be used as an indicator of the relative durability of a particular enamel.1.1 This test method covers the determination of the resistance of a fired ceramic-glass enamel to a 10 % alkali solution held near its boiling point for 2 h. 1.2 This test method is not applicable to large tempered glass sheets or specimens larger than 9 by 9 cm. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 9.

Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel

ASTM C676-04(2009) 玻璃餐具上陶瓷装饰耐洗涤性的标准试验方法

This test method provides a means of estimating the qualitative performance of glass enamel decorations that are exposed to high phosphate detergents during use. This test method also attempts to simulate accelerated exposure to high phosphate detergents prior to testing for heavy metal release, such as in Test Method C 927 when long term performance of enamels must be evaluated.1.1 This qualitative test method is designed to provide a convenient and reproducible method of determining the detergent resistance of decorations applied to glass tableware. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Detergent Resistance of Ceramic Decorations on Glass Tableware

ASTM C735-04(2009) 可反复使用玻璃啤酒容器及饮料容器上陶瓷装饰耐酸性的标准试验方法

This test method evaluates the quality and serviceability of ceramic decorations on returnable beer and beverage containers. This test method is also suitable for specification acceptance. Its significance is that bottles with good acid resistance coatings have longer service life.1.1 This test method covers qualitative determination of the acid resistance of ceramic decorations on returnable beer and beverage containers, to assure the necessary durability of the decoration. 1.2 This test provides an indication of performance when and if the decoration is to be exposed to the acid solutions used in reclaiming bottles, and it also covers those instances where the beverages themselves have acidic properties. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Acid Resistance of Ceramic Decorations on Returnable Beer and Beverage Glass Containers

ASTM C162-03 玻璃和玻璃制品的标准术语

1.1 This terminology defines terms generally used in the glass industry.1.2 In some cases in which a usage is specific to a ceertain industry, that is spelled out within the definition. For completeness and hisotrical purposes, terms that are outdated are listed as being archaic. The reader is cautioned that some companies or industries may define or use terms differently than the way these terms are defined within this terminology.1.3 Other sources of glass glossaries are Glass Association of North America's Glazing Manual, Engineering Standards Manual for Tempered Glass, Laminated Glass Design Guide,and ASTM Committee C-14 standards.

Standard Terminology of Glass and Glass Products

PAS 54-2003 家用陶瓷和玻璃器皿规范.接触食品的物品和瓶子

This PAS specifies requirements for ceramicware and glassware intended primarily for home and domestic use. This PAS acts as an umbrella PAS, referring to a variety of standards on ceramicware and glassware. It covers the following: — requirements for ceramicware, glassware and glass ceramicware: • chemical composition; • integrity of handle attachments; • resistance to impact breakage in service; • thermal shock endurance; • metal marking; • performance of vessels for pouring; • handle and knob temperature; • stability; • water retention; • metal release; • metal release: lip/rim test. — additional requirements for ceramicware: • water absorption; • crazing resistance; • translucency. — additional requirements for glassware: • durability – hand washing; • temper level. — additional requirements for special applications: • microwave usage; • resistance to freezing and freezer to oven usage; • freezer to microwave usage; • dishwasher usage (durability); — conformity marking.

Specification for domestic ceramicware and glassware - Articles intended for contact with foodstuffs,and vases

QB/T 2562-2002 电视机旋转台用玻璃

本标准规定了电视机旋转台用玻璃的分类、规格尺寸、技术要求、试验方法、检验规则和标志、包装、运输、贮存。

Rotating plate of glass for TV

ASTM C1509-02(2012) 串珠工艺玻璃管和配件的标准规格

1.1 This specification covers chemically resistant, low expansion Type-I borosilicate glass, Class A, (see Specification E438) used to manufacture beaded end flanged-glass pipe and fittings for pressure and vacuum applications.

Standard Specification for Beaded Process Glass Pipe and Fittings