Y56 体育用品 标准查询与下载

ANSI/ASTM F2530:2013 骑牛比赛使用的带防护面具的防护安全帽规格

Specification for Protective Headgear with Faceguard Used in Bull Riding

ANSI/ASTM F2679:2013 低能量气枪用6mm射弹的规范

Specification for 6mm Projectiles Used with Low Energy Air Guns

ANSI/ASTM F2773:2013 压缩空气或氮气转储和小型彩弹球汽筒安全处理方法的操作规程

Practice for Transfilling Compressed Air or Nitrogen and Safe Handling of Small Paintball Cylinders

ANSI/ASTM F2713:2013 曲棍球用眼睛保护装置规范

Specification for Eye Protectors for Field Hockey

ASTM F2983-13 摔跤垫贴标和养护用制造商标准指南

4.1 This guide gives guidelines for labels and instructions to manufacturers that manufacture wrestling mats. 4.2 The purpose of the labels and instructions is to help alert and remind users of important issues related to wrestling mats and their use. 4.3 Limitation—This guide applies only to wrestling mats whose standard specifications are under auspices of ASTM Committee F08. 1.1 This guide sets forth labeling and instruction guidelines for manufacturers of wrestling mats. 1.2 This guide applies only to wrestling mats whose standard specifications are under auspices of ASTM Committee F08. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Manufacturers for Labeling and Care Instructions for Wrestling Mats

ANSI/ASTM F1163:2013 骑马运动和马术用防护帽规格

Specification for Protective Headgear Used in Horse Sports and Horseback Riding

ANSI/ASTM F2983:2013 摔跤垫标签和清洁养护用制造商指南

Guide for Manufacturers for Labeling and Care Instructions for Wrestling Mats

ANSI/ASTM F3023:2013 固定式自行车和曲柄训练设备评估设计和性能特征用试验方法

Test Method for Evaluating Design and Performance Characteristics of Stationary Exercise Bicycles and Crank Training Equipment

ASTM D3994-13 机织游泳衣织物的标准性能规格

5.1 Upon mutual agreement between the purchaser and the supplier, woven fabrics intended for this end use should meet all of the requirements listed in Table 1 of this specification. 5.2 It is recognized that for purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable fabrics that do not conform to all of the requirements in Table 1. Therefore, one or more of the requirements listed in Table 1 may be modified by mutual agreement between the purchaser and the supplier. 5.2.1 In such cases, any references to the specification shall specify that: “This fabric meets ASTM Specification D3994, except for the following characteristic(s).” 5.3 Where no prepurchase agreement has been reached between the purchaser and the supplier, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 5.2, ultimate consumer demands dictate varying performance parameters for any particular style of fabric. 5.4 The significance and use of particular properties and test methods are discussed in the appropriate sections of the specified test methods. 1.1 This performance specification covers woven fabrics for use in men's, women's and children's swimwear, composed of any textile fiber or mixture of textile fibers. 1.2 These requirements apply to the length and width directions for those properties where fabric direction is pertinent. 1.3 The following safety hazards caveat pertains only to the test method described in this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Specification for Woven Swimwear Fabrics

ASTM F2530-13 骑牛用带面罩的防护头盔的标准规范

1.1 This specification covers performance requirements and describes test methods for protective headgear with faceguards for use in bull riding. 1.2 All testing and requirements of this specification shall be in accordance with Test Methods F1446, except where noted herein. 1.3 Partial utilization of this specification is prohibited. Any statement of compliance with this specification shall be a certification that the headgear with faceguard meets all of the requirements of the specification in their entirety. A headgear with faceguard that fails to meet any one of the requirements of this specification is considered to have failed the specification, and shall not be sold with any indication that it meets parts of the specification. 1.4 Headgear with faceguards designed to comply with this and other standards may proclaim uses as certified by the manufacturer. 1.5 The values stated in SI units are to be regarded as standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Protective Headgear with Faceguard Used in Bull Riding

ANSI/ASTM F1587:2013 冰球守门员用头部和面部防护设备规格

Specification for Head and Face Protective Equipment for Ice Hockey Goaltenders

ASTM F770-13 娱乐骑乘设备及装置所有, 操作, 维护和检验的标准实施规程

3.1 The purpose of this practice is to delineate information and to establish procedures for the operation of amusement rides and devices. 1.1 This practice provides guidelines for operations, maintenance, and inspection procedures for amusement rides and devices to be performed by the owner/operator. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices

ASTM F2291-13 娱乐骑乘设备及装置设计的标准实施规程

4.1 The purpose of this practice is to provide designers, engineers, manufacturers, owners, and operators with criteria and references for use in designing amusement rides and devices or a major modification for amusement rides or devices. 1.1 This practice establishes criteria for the design of amusement rides, devices and major modifications to amusement rides and devices manufactured after the effective date of publication except as noted in 1.2. 1.2 This practice shall not apply to: 1.2.1 Patron directed amusement rides or devices (for example, go karts, bumper cars, bumper boats), 1.2.2 Artificial climbing walls, 1.2.3 Air-supported structures, 1.2.4 dry slides, 1.2.5 coin operated rides, 1.2.6 Amusement rides or devices that involve the purposeful immersion of the patron's body partially or totally in the water and involves more than incidental patron water contact (for example, pools, water slides, lazy rivers, interactive aquatic play devices), 1.2.7 Amusement rides and devices whose design criteria are specifically addressed in another ASTM standard, 1.2.8 Portions of an amusement ride or device unaffected by a major modification, 1.2.9 Upgrades to electrical wiring, electrical motors and electrical components of amusement rides and devices provided the original design and safety criteria are maintained or enhanced, and 1.2.10 Pre-existing designs manufactured after the effective date of publication of this practice if the design is service proven or previously compliant and the manufacturer provides: 1.2.10.1 A historical summary of the amusement ride, device or major modification, and 1.2.10.2 A statement that the design is service proven or previously compliant as specified by Section 3. 1.2.10.3 Amusement rides and devices, and major modifications to amusement rides and devices may qualify as “previously compliant” for five years following the date of publication of this practice. Thereafter, amusement rides and devices, and major modifications to amusement rides and devices must qualify as “service proven” or meet the requirements of this practice. 1.3 This practice includes an annex (mandatory), which provides additional information (for example, rationale, background, interpretations, drawings, commentary, and so forth) to improve the user's understanding and application of the criteria presented in this practice. The annex information shall be interpreted as mandatory design criteria. 1.4 This practice includes an appendix (non-mandatory), which provides additional information (for example, rationale, background, interpretations, drawings, commentary, and so forth.) to improve the user's understanding and application of the criteria presented in this practice. The appendix information shall not be interpre......

Standard Practice for Design of Amusement Rides and Devices

ASTM D3994-13e1 机织游泳衣织物的标准性能规格

5.1 Upon mutual agreement between the purchaser and the supplier, woven fabrics intended for this end use should meet all of the requirements listed in Table 1 of this specification. 5.2 It is recognized that for purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable fabrics that do not conform to all of the requirements in Table 1. Therefore, one or more of the requirements listed in Table 1 may be modified by mutual agreement between the purchaser and the supplier. 5.2.1 In such cases, any references to the specification shall specify that: “This fabric meets ASTM Specification D3994, except for the following characteristic(s).” 5.3 Where no prepurchase agreement has been reached between the purchaser and the supplier, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 5.2, ultimate consumer demands dictate varying performance parameters for any particular style of fabric. 5.4 The significance and use of particular properties and test methods are discussed in the appropriate sections of the specified test methods. 1.1 This performance specification covers woven fabrics for use in men's, women's and children's swimwear, composed of any textile fiber or mixture of textile fibers. 1.2 These requirements apply to the length and width directions for those properties where fabric direction is pertinent. 1.3 The following safety hazards caveat pertains only to the test method described in this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Specification for Woven Swimwear Fabrics

NF S52-334:2012 登山设备.动力攀登绳.安全性要求和试验方法

Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods

DIN EN 892:2012 登山设备.动力攀登绳.试验方法和安全性要求.德文版本EN 892-2012

Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods; German version EN 892:2012

NF S52-350-2*NF EN 15151-2:2012 登山设备.制动设备.第2部分:手动制动装置的安全性要求和试验方法

Mountaineering equipment - Braking devices - Part 2 : manual braking devices, safety requirements and test methods.

NF S52-350-1*NF EN 15151-1:2012 登山设备.制动设备.第1部分:带手动辅助锁的制动装置的安全性要求和试验方法

Mountaineering equipment - Braking devices - Part 1 : braking devices with manually assisted locking, safety requirements and test methods.

BS EN 892:2012 登山设备.动力登山绳.试验方法和安全性要求

Mountaineering equipment. Dynamic mountaineering ropes. Safety requirements and test methods

BS EN 15151-1:2012 登山装备. 制动装置. 带手动辅助锁定的制动装置, 安全要求和试验方法

Mountaineering equipment. Braking devices. Braking devices with manually assisted locking, safety requirements and test methods