Y71 建筑五金 标准查询与下载

BS EN 13126-17:2008 建筑五金件.窗户和落地窗的要求和试验方法.上下移动&推拉式门和窗用五金件

This part of EN 13126 provides requirements and test methods for durability, strength, security and function of hardware for Tilt&Slide windows and door height windows.

Building hardware — Requirements and test methods for windows and doors height windows — Part 17: Hardware for Tilt&Slide windows and doors

BS EN 13126-15:2008 建筑五金件.窗和落地窗的要求和试验方法.水平推拉和推拉折叠窗和门用滚轴

This part of EN 13126 provides requirements and test methods for the durability, strength, security and function of rollers for horizontal sliding and inward or outward sliding folding windows and door height windows in accordance with common applications as shown in Annex B, EN 13126-1:2006. This standard is applicable to rollers, irrespective of whether they are adjustable or not, and irrespective of the method or type of fixing or if they are used independently, or in multiples or combinations. NOTE 1 Guide tracks, laterals guides and rails used while testing the rollers for sliding folding windows and door height windows (window types N Q, R and S) are considered to be part of the complete sliding folding hardware set. NOTE 2 The hinges used while testing the rollers for sliding folding windows and door height windows (window types Q, R and S) are considered to be part of the complete sliding folding hardware set. Testing the hinges separately is not required in this case.

Building hardware — Requirements and test methods for windows and doors height windows — Part 15: Rollers for horizontal sliding and sliding folding windows and doors

JIS A 1510-2 AMD 1:2008 建筑门附件的试验方法.第2部分:门附件(修改件1)

Test method for door fittings of buildings -- Part 2: Fittings for door (Amendment 1)

CEN EN 13126-16-2008_ 建筑小五金.窗户和等门高窗的试验方法与要求.第16部分:升落和滑动门窗用五金器具

This part of EN 13126 provides requirements and test methods for durability, strength, security and function of hardware for Lift&Slide windows and door height windows, regardless of whether the hardware enables an additional tilt position. NOTE This Standard is also applicable to hardware systems, whereby the sash itself is not lifted but a gasket mechanism is moved.

Building hardware - Requirements and test methods for windows and doors height windows - Part 16: Hardware for Lift&Slide windows and doors

CEN EN 13126-15-2008_ 建筑小五金.窗户试验方法和要求.第15部分:水平滑动用滚筒和推拉折页窗门

This part of EN 13126 provides requirements and test methods for the durability, strength, security and function of rollers for horizontal sliding and inward or outward sliding folding windows and door height windows in accordance with common applications as shown in Annex B, EN 13126-1:2006. This standard is applicable to rollers, irrespective of whether they are adjustable or not, and irrespective of the method or type of fixing or if they are used independently, or in multiples or combinations. NOTE 1 Guide tracks, laterals guides and rails used while testing the rollers for sliding folding windows and door height windows (window types N Q, R and S) are considered to be part of the complete sliding folding hardware set. NOTE 2 The hinges used while testing the rollers for sliding folding windows and door height windows (window types Q, R and S) are considered to be part of the complete sliding folding hardware set. Testing the hinges separately is not required in this case.

Building hardware - Requirements and test methods for windows and doors height windows - Part 15: Rollers for horizontal sliding and sliding folding windows and doors

CEN EN 13126-17-2008_ 建筑小五金.窗户和等门高窗的试验方法与要求.第16部分:倾斜和滑动门窗用五金器具

This part of EN 13126 provides requirements and test methods for durability, strength, security and function of hardware for Tilt&Slide windows and door height windows.

Building hardware - Requirements and test methods for windows and doors height windows - Part 17: Hardware for Tilt&Slide windows and doors

DIN EN 14637:2008 建筑五金件.防火/防烟门组件用电气控制开放系统.要求、试验方法、应用及维修

This part of EN 14511 specifies minimum requirements which ensure that air conditioners, heat pumps and liquid chilling packages with electrical driven compressors are fit for the use designated by the manufacturer when used for space heating and/or cooling. This European Standard applies to factory-made units that can be ducted. This standard applies to factory-made liquid chilling packages with integral condensers or for use with remote condensers. This standard applies to factory-made units of either fixed capacity or variable capacity by any means. Packaged units, single split and multisplit systems are covered by this standard. Single duct and double duct units are covered by the standard. In the case of units consisting of several parts, the standard applies only to those designed and supplied as a complete package, except for liquid chilling packages with remote condenser. O This standard is primarily intended for water and brine chilling packages but can be used for cooling any other liquid subject to agreement. This standard applies to air-to-air air conditioners which evaporate the condensate on the condenser side. The units having their condenser cooled by air and by the evaporation of external additional water are not covered by this standard. This standard does not apply to units using transcritical cycles, e.g. with CO2 as refrigerant. Installations used for heating and/or cooling of industrial processes are not within the scope of this standard. NOTE Part load testing of units is dealt with in CEN/TS 14825.

Building hardware - Electrically controlled hold-open systems for fire/smoke door assemblies - Requirements, test methods, application and maintenance;English version of DIN EN 14637:2008-01

ASTM F626-08(2013) 栅栏配件的标准规范

1.1 This specification covers the materials, coating requirements, and inspection of fence accessories for chain-link fence for the following: 1.1.1 Post and line caps, 1.1.2 Rail and brace ends, 1.1.3 Top rail sleeves, 1.1.4 Tie wires, clips, and fasteners, 1.1.5 Tension and brace bands, 1.1.6 Tension bars, 1.1.7 Truss rod assembly, 1.1.8 Barbed wire arms, 1.1.9 Color coating of fittings, and 1.1.10 Fitting size terminology. 1.2 The values stated in inch-pound units are to be regarded as the standard. The SI values given in parentheses are for information only.

Standard Specification for Fence Fittings

ANSI A250.13-2008 推拉门配件用耐强烈暴风部件的测试和评估

This standard provides procedures for testing and establishing load ratings (design pressure in pounds per square foot or design load in pounds force) for components of exterior swinging door assemblies for purposes of protection of openings during severe windstorm conditions, such as a hurricane, that produces sustained wind speeds or gusts in a range of 110 to 170 mph. It is not intended to simulate wind forces generated by tornadoes.

Testing and Rating of Severe Windstorm Resistant Components for Swinging Door Assemblies

ANSI/BHMA A156.32-2008 完整门洞组件

This Standard establishes requirements for Integrated Door Opening Assemblies with steel, wood and fiberglass reinforced doors which are supplied to the customer with integral hardware. At a minimum, they shall include a door, frame, hanging device, and latching mechanism.

Integrated Door Opening Assemblies

ANSI/BHMA A156.3-2008 出口装置

This standard establishes requirements for exit devices and trim, automatic and self-latching flush bolts, removable mullions, coordinators, and carry-open bars. Performance criteria include cycle, operational, strength, material evaluation, and finish tests. Functions and types are described and numbered.

Exit Devices

NF P26-330-7:2007 建筑五金件.窗和落地窗的要求和试验方法.第7部分:指形拉手

Building hardware - Requirements and test methods for windows and door height windows - Part 7 : finger catches.

DIN EN 14648:2007 建筑五金.百叶窗配件.要求和试验方法

The project applies to hardware to be used with wing, folding and sliding shutters, made up both by one or more shutters.

Building hardware - Fittings for shutters - Requirements and test methods; English version of DIN EN 14648:2007-12

DIN EN 13126-7:2007 建筑五金.窗和门上窗的要求和试验方法.第7部分:指形拉手

This European Standard specifies the requirements and test procedures for durability, strength, security and function of finger catches for windows and door height windows.

Building hardware - Requirements and test methods for windows and door height windows - Part 7: Finger catches; English version of DIN EN 13126-7:2007-12

CEN EN 14648-2007 建筑五金件.家具和百叶窗.试验方法和要求

This European Standard specifies performance requirements for the strength and durability of hardware for the operation of movable shutter sashes including requirements and test methods. This European Standard is applicable to hardware for side-hung and top-hung shutters comprising one or more shutter sashes. The requirements and test methods of this European Standard are applicable to the following: ? shapes and dimensions of sash hinges, double-sashed shutter hinges and frame hinges ? shapes and dimensions of frame hinges and sash hinges with arrest function Only the corrosion requirements of 4.7 are applicable to double-sash shutter latches, locking-rods, decorative corner-brackets, handles, stops without automatic arrest function, central hinges, shutter catches with automatic arrest function and other hardware components for window and door shutters. NOTE 1 The sashes of side-hung shutters may have additional projecting shutter-inserts. The hardware for these projecting shutter-inserts is not covered by the scope of this European Standard. NOTE 2 If due to the hardware fixing type or the dead weight of the described test shutter, this can not be used, a corresponding system sash with the same dimensions (800 mm wide × 1 400 mm high) can be tested. This is particularly valid for hardware used exclusively in a complete modular system from a systems manufacturer (consisting of the hardware components, frame profiles and panel units as well as the necessary fixing materials). NOTE 3 Tower bolts and locking-rods should conform to EN 12051. NOTE 4 Fixings used to attach hardware to shutters are not covered by this European Standard. To allow a choice of items from a single source, so-called "product group" of elements may be nominated by the manufacturer. The single components may be called "product group" components, if these are approved by accredited test authorities commissioned to test, based upon the comparable features; for example hinge features with regard to material, thickness, hole diameter and pin diameter. Where test results for the weakest element of a product group are valid the rest of the product group need not be tested. It is a test laboratory’s right to accept or reject a product for assessment within a product group or to request further test specimens.

Building hardware - Fittings for shutters - Requirements and test methods

CEN EN 14648-2007_ 建筑五金件.家具和百叶窗.试验方法和要求

This European Standard specifies performance requirements for the strength and durability of hardware for the operation of movable shutter sashes including requirements and test methods. This European Standard is applicable to hardware for side-hung and top-hung shutters comprising one or more shutter sashes. The requirements and test methods of this European Standard are applicable to the following:  shapes and dimensions of sash hinges, double-sashed shutter hinges and frame hinges  shapes and dimensions of frame hinges and sash hinges with arrest function Only the corrosion requirements of 4.7 are applicable to double-sash shutter latches, locking-rods, decorative corner-brackets, handles, stops without automatic arrest function, central hinges, shutter catches with automatic arrest function and other hardware components for window and door shutters. NOTE 1 The sashes of side-hung shutters may have additional projecting shutter-inserts. The hardware for these projecting shutter-inserts is not covered by the scope of this European Standard. NOTE 2 If due to the hardware fixing type or the dead weight of the described test shutter, this can not be used, a corresponding system sash with the same dimensions (800 mm wide × 1 400 mm high) can be tested. This is particularly valid for hardware used exclusively in a complete modular system from a systems manufacturer (consisting of the hardware components, frame profiles and panel units as well as the necessary fixing materials). NOTE 3 Tower bolts and locking-rods should conform to EN 12051. NOTE 4 Fixings used to attach hardware to shutters are not covered by this European Standard. To allow a choice of items from a single source, so-called "product group" of elements may be nominated by the manufacturer. The single components may be called "product group" components, if these are approved by accredited test authorities commissioned to test, based upon the comparable features; for example hinge features with regard to material, thickness, hole diameter and pin diameter. Where test results for the weakest element of a product group are valid the rest of the product group need not be tested. It is a test laboratory’s right to accept or reject a product for assessment within a product group or to request further test specimens.

Building hardware — Fittings for shutters — Requirements and test methods

DIN EN 1670:2007 建筑五金器具.耐腐蚀.要求和试验方法

This European Standard specifies the requirements for the corrosion resistence of building hardware for doors,windows, shutters and curtain walling. This European Standard provides a method of classification of corrosion resistance of building hardware based on performance in a neutral salt spray test(EN ISO 9227). This European Standard specifies the requirements for both coated and uncoated surfaces and five grades of corrosion resistance being laid down in accordance with the different conditions of use grades 1 to 5.A grade 0 is also included for which no requirements have been specified.Requirements for levels of corrosion resistance which are higher than those laid down for grade 5 have been included in this European Standard and are subject to agreement where required. This European Standard also applies to the metal fasteners required for fixing building hardware if specified. Screws and fastenings which are sold with a hardware product which conforms to this European Standard should also conform to this European Standard. NOTE 1 The term "grade"used in this European Standard corresponds to the term "class"which is used in ISO standards. NOTE 2 There is seldom a direct relationship between resistance to the action of salt spray and resistance to corrosion in other media,because several factors influencing the progress of corrosion, such as the fomation of as a direct guide to corrosion resistance of the testen materials in all environments where these materials may be used.Also, the performance of different materials during the test should not be taken as a direct guide to the corrosion resistance of these materials inservice. The method described in this European Standard gives a means of checking that the comparative quality of a material, with or without corrosion protection,is maintained. In addition,for quality control purposes,comparison can be made between specimens coated with the same coating.As comparative tests,however,salt spray tests are only suitable if the coatings are sufficiently similar in nature. It is often not possible to use results gained from salt spray testing as a comparative guide to the long-term behaviour of different coating systems as the corrosion stress during these tests differs significantly from the corrosion stresseds encountered in practice.

Building hardware - Corrosion resistance - Requirements and test methods; English version of DIN EN 1670:2007-06

BS EN 1670:2007 建筑五金.耐腐蚀性.要求和试验方法

This European Standard specifies the requirements for the corrosion resistance of building hardware for doors, windows, shutters and curtain walling. This European Standard provides a method of classification of corrosion resistance of building hardware based on performance in a neutral salt spray test (EN ISO 9227). This European Standard specifies requirements for both coated and uncoated surfaces and five grades of corrosion resistance being laid down in accordance with the different conditions of use grades 1 to 5. A grade 0 is also included for which no requirements have been specified. Requirements for levels of corrosion resistance which are higher than those laid down for grade 5 have not been included in this European Standard and are subject to agreement where required. This European Standard also applies to the metal fasteners required for fixing building hardware if specified. Screws and fastenings which are sold with a hardware product which conforms to this European Standard should also conform to this European Standard. NOTE 1 The term "grade" used in this European Standard corresponds to the term "class" which is used in ISO standards. NOTE 2 There is seldom a direct relationship between resistance to the action of salt spray and resistance to corrosion in other media, because several factors influencing the progress of corrosion, such as the formation of protective films, vary greatly with the conditions encountered. Therefore, the test results should not be regarded as a direct guide to the corrosion resistance of the tested materials in all environments where these materials may be used. Also, the performance of different materials during the test should not be taken as a direct guide to the corrosion resistance of these materials in service. The method described in this European Standard gives a means of checking that the comparative quality of a material, with or without corrosion protection, is maintained. In addition, for quality control purposes, comparison can be made between specimens coated with the same coating. As comparative tests, however, salt spray tests are only suitable if the coatings are sufficiently similar in nature. It is often not possible to use results gained from salt spray testing as a comparative guide to the long-term behaviour of different coating systems as the corrosion stress during these tests differs significantly from the corrosion stresses encountered in practice.

Building hardware - Corrosion resistance - Requirements and test methods

QB/T 2584-2007 淋浴房

shower room

QB 2585-2007 喷水按摩浴缸

本标准规定了喷水按摩浴缸的定义、要求、试验方法、检验规则及标志、使用说明书、包装、运输、贮存。 本标准适用于由缸体、水泵、气泵、喷嘴、排水器等配件组装的不超过三人使用的按摩浴缸。

Hydromassage bathtub