Y71 建筑五金 标准查询与下载

NF P26-330-1:2006 建筑五金.窗和落地窗要求和试验方法.第1部分:对所有类型五金要求

Building hardware - Requirement and test methods for windows and doors heigt windows - Part 1 : requirements common to all types of hardware.

NF P26-330-8:2006 建筑五金件.窗和落地窗的要求和试验方法.第8部分:倾斜和旋转五金件

Building hardware - Requirements and test methods for windows and doors heigt windows - Part 8 : tilt and turn, Tilt-First and Turn-Only hardware.

DIN EN 1158 Berichtigung 1:2006 建筑五金.门锁紧装置.要求和试验方法(包括修改件A1-2002)

This European Standard specifies requirements for door coordinator devices for double leaf swing doors fitted with door closers, and includes both separately mounted devices and mechanisms incorporated in door closers. Door coordinator devices are used where it is necessary to ensure the correct sequence of closing of double leaf swing doors, e. g. doors with rebated meeting stiles. Door coordinator devices manufactured in accordance with this European Standard are recommended for use wherever there is a requirement for reliable sequential closing of double leaf swing fire/smoke doors incorporating rebated meeting stiles.

Building hardware - Door coordinator devices - Requirements and test methods (includes amendment A1:2002); German version EN 1158:1997 + A1:2002, Corrigenda to DIN EN 1158:2003-04; German version EN 1158:1997/AC:2006

DIN EN 12209 Corrigendum 1:2006 建筑五金件. 锁和闩. 机械锁, 闩和锁板. 机械锁, 闩和锁板. 试验方法和要求. DIN EN 12209: 2004-03英文版本勘误表1

Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Mechanically operated locks, latches and locking plates - Requirements and test methods Corrigendum 1 to English version of DIN EN 12209:2004-03

DIN EN 1154 Berichtigung 1:2006 建筑五金.控制门锁紧装置.要求和检验方法(包括修改件A1-2002)

Building hardware - Controlled door closing devices - Requirements and test methods (includes amendment 1:2002); German version EN 1154:1996 + A1:2002, Corrigenda to DIN EN 1154:2003-04; German version EN 1154:1996/AC:2006

DIN EN 1155 Berichtigung 1:2006 建筑五金.旋转门用电源固定装置.要求和检验方法(包括修改件A1-2002)

This European Standard specifies requirements for separate hold-open devices and also for hold-open mechanisms incorporated in a door closer. Electrically powered hold-open devices for swing doors manufactured according to this European Standard can hold a swing door at a fixed position or can allow the door to swing freely. In each case interruption of the electrical supply will cause the controlled door to close positively.

Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods (includes amendment A1:2002); German version EN 1155:1997 + A1:2002, Corrigenda to DIN EN 1155:2003-04; German version EN 1155:1997/AC:2006

DIN EN 12209 Berichtigung 1:2006 建筑五金.门锁和插销.机控锁,插销和锁片.要求和试验方法

This European Standard specifies requirements and test methods for durability, strength, security, and function of mechanically operated locks and latches and their locking plates for use in doors, window doors and entrance doors in buildings.

Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods; German version EN 12209:2003, Corrigenda to DIN EN 12209:2004-03; German version EN 12209:2003/AC:2005

DLA A-A-59487 A VALID NOTICE 1-2006 锁具(钥匙操作)

A-A-59487A, dated 03 July 2001, has been reviewed and determined to be valid for use in acquisition.

PADLOCK (KEY OPERATED)

DLA A-A-59486 A VALID NOTICE 1-2006 锁具,单独锁匙或同号锁匙

A-A-59486A, dated 03 July 2001, has been reviewed and determined to be valid for use in acquisition.

PADLOCK SET (INDIVIDUALLY KEYED OR KEYED ALIKE)

DIN EN 13126-8:2006 建筑五金件.窗和落地窗的要求和试验方法.第8部分:倾斜和旋转以及先倾斜和只旋转的五金件

This European Standard specifies the requirements and test procedures for durability, strength, security and function of Tilt&Turn, Tilt-First and Turn-Only hardware components or sets for windows and balcony doors in accordance with common application as shown in Annex A of prEN 13126-1. For other applications refer to EN 12519.#,,#

Building hardware - Requirements and test methods for windows and doors height windows - Part 8: Tilt & Turn, Tilt-First and Turn-Only hardware English version of DIN EN 13126-8:2006-05

ANSI/BHMA A156.20-2006 条式及T形铰链和搭钩

This Standard establishes requirements for Strap Hinges, Tee Hinges, and Hasps, and includes performance tests covering operational and strength criteria. Tests described in this Standard are performed under laboratory conditions. In actual usage, results vary because of installation, maintenance and environmental conditions.

Strap and Tee Hinges, and Hasps

DIN-Fachbericht CEN/TR 15349:2006 家具五金件.扩展元件及其部件术语.三种语言版本 CEN/TR 15349-2006

This European Technical Report specifies terms for all types of extension elements and their components for all fields of application, except table extensions. With the aid of figures it establishes different types, with the aim of facilitating understanding the technical language.

Hardware for furniture - Terms for extension elements and their components; Trilingual version CEN/TR 15349:2006

BS EN 13126-8:2006 建筑五金.窗户和门上窗的要求和试验方法.倾斜和旋转、先倾斜和只旋转的五金

This European Standard specifies the requirements and test procedures for durability, strength, security and function of Tilt&Turn, Tilt-First and Turn-Only hardware components or sets for windows and balcony doors in accordance with common application as shown in Annex A of EN 13126-1. By means of this European Standard, the user of recognized tested hardware can presume, that with correct usage, the Tilt&Turn, Tilt-First or Turn-Only hardware components or sets for windows and balcony-doors conforms to prescribed requirements. NOTE To maintain the guaranteed characteristics during the utilization period, it is necessary to comply with the manufacturer’s product information as well as the manufacturer’s maintenance and service instructions in a manner that can be proven.

Building hardware - Requirements and test methods for windows and doors height windows - Part 8: Tilt & turn, tilt-first and turn-only hardware

BS EN 13126-1:2006 建筑五金.窗户和门上窗的要求和试验方法.所有种五金的通用要求

This European Standard specifies performance requirements for the strength and durability of hardware for the operation of movable sashes of windows and balcony doors including requirements and test methods common to all hardware. This European Standard is applicable to the hardware suitable for windows and balcony doors in Table 1, whatever the material used for the construction of the window. Fusible links, hardware for lifting side-hung windows, hardware for windows that remain parallel to their own plane and move perpendicular to it on pantograph type gear, fixing devices that are used to assemble or install a fixed window, devices that are used for the permanent fixing of a complete window into a building structure, mechanisms for the pneumatic or hydraulic remote operation of windows; also single axis hinges (other than those, which provide a pivot-function for windows) and dead bolts suitable for both door and window sashes, as covered in EN 1935 and EN 12051 respectively. NOTE 1 Should fire/smoke classifications be required, reference should be made to the respective standards mentioned in 5.5. NOTE 2 Should burglar resistance

Building hardware - Requirements and test methods for windows and doors height windows - Part 1: Requirements common to all types of hardware

DIN 18267 Berichtigung 1:2005 窗把手.弹簧锁和可锁窗把手.DIN 18267-2005的勘误

Window handles - Clickable and lockable window handles, Corrigenda to DIN 18267:2005-01

NF P26-321:2005 建筑五金.锁用圆柱形锁芯.要求和试验方法

Building hardware - Cylinders for locks - Requirements and test methods.

ANSI/BHMA A156.22-2005 门垫片和封边系统

This Standard establishes requirements for the performance and installation of gasketing systems including intumescents applied to, or mortised to doors, frames or both. Included are performance tests intended to provide installation guidelines, resistance to smoke and air infiltration, and measure the life and durability of gasketing materials.

Door Gasketing and Edge Seal Systems

JIS A 5508 ERRATUM 1:2005 勘误

ERRATUM

CJ/T 211-2005 聚合物基复合材料检查井盖

本标准规定了聚合物基复合材料检查井盖的分类、承载等级、技术要求、试验方法、检验规则及标志等。 本标准适用于安装在城市道路、公路上的各种检查井盖，也适用于安装在其他机动车和非机动车可能行驶或停放的地面上的各种检查井盖。同时也适用于安装在人行道、绿化用地上的各种检查井盖。

Inspection manhole lid made of polymer matrix composites

CJ/T 208-2005 可曲挠橡胶接头

本标准规定了可曲挠橡胶接头的产品分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于由织物增强的橡胶件与平形接头、松套金属法兰或螺纹管法兰组成的可曲挠橡胶接头。

Flexible rubber joint