Y71 建筑五金 标准查询与下载

BS DD CEN/TS 13126-13:2004 建筑五金、窗户和门上窗的配件.要求和试验方法.窗框平衡

Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 13:Sash balances

BS DD CEN/TS 13126-9:2004 建筑五金、窗户和门上窗的配件.要求和试验方法.尖轴铰链

Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 9:Pivot hinges

BS DD CEN/TS 13126-8:2004 建筑五金、窗户和门上窗的配件.要求和试验方法.倾斜和旋转、先倾斜和只旋转的五金

Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 8:Tilt & turn, Tilt-First and Turn-Only hardware

BS DD CEN/TS 13126-7:2004 建筑五金、窗户和门上窗的装置.要求和试验方法.指形拉手

Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 7:Finger catches

BS DD CEN/TS 13126-5:2004 建筑五金、窗户和门上窗的配件.要求和试验方法.开窗限制设备

Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 5:Devices that restrict the opening of windows

BS DD CEN/TS 13126-3:2004 建筑五金、窗户和门上窗的配件.要求和试验方法.第3部分:长插销/滑扣用操纵配件

Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 3:Manoeuvring fittings for espagnolette bolts/sliding button

BS DD CEN/TS 13126-1:2004 建筑五金、窗户和门上窗的配件.要求和试验方法.所有类型配件的通用要求

Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 1:Requirements common to all types of fittings

BS DD CEN/TS 13126-12:2004 建筑五金、窗户和门上窗的配件.要求和试验方法.边悬伸出翻转五金

Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 12:Side-hung projecting reversible hardware

BS DD CEN/TS 13126-6:2004 建筑五金、窗户和门上窗的装置.要求和试验方法.可变几何形状的固定铰链(有或无摩擦系统)

Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 6:Variable geometry stay hinges (with or without a friction system)

BS DD CEN/TS 13126-10:2004 建筑五金、窗户和门上窗的配件.要求和试验方法.力臂平衡系统

Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 10:Arm balancing systems

BS DD CEN/TS 13126-11:2004 建筑五金、窗户和门上窗的配件.要求和试验方法.顶悬伸出翻转五金

Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 11:Top hung projecting reversible hardware

BS DD CEN/TS 13126-4:2004 建筑五金、窗户和门上窗的配件.要求和试验方法.长插销

This part of CEN/TS 13126 specifies the requirements and test methods for durability, strength, security and function of mechanically operated espagnolette bolts and their strike plates / keeps for use on windows and door height windows. This standard is applicable to the following types of espagnolette bolts a) Side bolts that operate transversely to the principal sliding rods; b) End bolts that operate in the same direction as the principal sliding rods; c) Fittings with both side bolts and end bolts. This standard does not incorporate door bolts subject to the scope of EN 12051, or multi-point locks subject to the scope of WI 00033250.

Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 4:Espagnolette bolts

NF P26-324:2004 建筑物五金.锁和闩.机械锁、闩和锁板.要求和试验方法

Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods.

CJ/T 190-2004 铝塑复合管用卡压式管件

Polyethlene/aluminum/polyethylene composite pipe press fitting

GA 93-2004 防火门闭门器

本标准规定了防火门闭门器的分类、规格、标记、要求、试验装置、试验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于安装在防火门和防火窗上使用的无定位装置的闭门器。

Fire-proof door closer

DIN EN 12209:2004 建筑物五金.锁和闩.机械锁、闩和锁板.要求和试验方法

This European Standard specifies requirements and test methods for durability, strength, security, and function of mechanically operated locks and latches and their locking plates for use in doors, window doors and entrance doors in buildings.

Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods; German version EN 12209:2003

BS 8424:2004 建筑五金.拉柄.要求和试验方法

This British Standard specifies requirements for the performance and testing of door mounted pull handles incorporating one fixing point or more. It is applicable to pull handles of all types of material and methods of manufacture.

Building hardware - Pull handles - Requirements and test methods

ANSI/BHMA A156.17-2004 自闭式铰链和枢轴

Establishes requirements for Self Closing Hinges & Pivots. Cycle tests, operational tests, finish tests, material and dimensional requirements are included.

Self Closing Hinges & Pivots

BS EN 12209:2003 建筑五金.门锁和插销.机控锁,插销和锁片.试验方法和要求

This European Standard specifies requirements and test methods for durability, strength, security, and function of mechanically operated locks and latches and their locking plates for use in doors, window doors and entrance doors in buildings. Locks, latches and their locking plates used in fire resistant and/or smoke control door assemblies require additional attributes in order to comply with the Essential Requirement "Safety in case of fire" either independently or as a part of a complete assembly. Additional requirements for locks and latches and their locking plates used on fire resistant and/or smoke control door assemblies are specified in annex A. The following locking devices and associated products are not covered by this European Standard: cylinders for locks, handles, electro-mechanically operated locks and striking plates, multi-point locks and their locking plates, locks for windows, padlocks, locks for safes, furniture locks and prison locks. NOTE A lock meeting this standard can at the same time be part of an exit device according to EN 179 or EN 1125.

Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods

DIN EN 12365-4:2003 建筑五金.门、窗、百叶窗和幕墙用密封垫和挡风雨条.第4部分:加速老化后回复的试验方法

Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 4: Recovery after accelerated ageing test method; German version EN 12365-4:2003