Y71 建筑五金 标准查询与下载

DIN EN 12365-3:2003 建筑五金.门、窗、百叶窗和幕墙用密封垫和挡风雨条.第3部分:弯曲回复试验方法

This standard specifies the method to be used to select, prepare, condition and test samples of gaskets or weatherstripping, to determine the percentage of recovery after being compressed or deflected through their working range to the minimum width under the conditions laid down in the test.#,,#

Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 3: Deflection recovery test method; German version EN 12365-3:2003

DIN EN 12365-2:2003 建筑五金.门、窗、百叶窗和幕墙用密封垫和挡风雨条.第2部分:线性压力试验方法

Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 2: Linear compression force test methods; German version EN 12365-2:2003

DIN EN 12365-1:2003 建筑五金.门、窗、百叶窗和幕墙用密封垫和挡风雨条.第1部分:性能要求和分类

This European Standard specifies the performance requirements of gaskets and weatherstripping for the control of the passage of air, water, noise and energy between openable and fixed parts of doors, windows, shutters and curtain walling. The general performance requirements in this Standard are applicable to gaskets and weatherstripping of all materials. This European Standard is not applicable to sealants, mastics, putties, or any such materials which are extruded in liquid or viscous form into the final place of use.#,,#

Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 1: Performance requirements and classification; German version EN 12365-1:2003

JC/T 931-2003 机械式便器冲洗阀

Mechanical flush valve for closet

QB 2585-2003 喷水按摩浴缸

本标准规定了喷水按摩浴缸(以下简称“按摩浴缸”)的定义、要求、试验方法、检验规则及标志、使用说明书、包装、运输、贮存。 本标准适用于由缸体、水泵、喷嘴、排水器等配件组装的不超过三人使用的按摩浴缸。

Hydromassage bathtub

QB 2584-2003 蒸汽淋浴房

本标准规定了蒸汽淋浴房的定义、要求、试验方法、检验规则、标志、使用 说明节、包装、运输与贮存。 本标准适用于由淋浴房体、底盆或喷水按摩浴缸、蒸汽发生器、喷激器等配件组成的蒸汽淋浴房。 本标准也适用于不带电器附件装置的淋浴房。

Steam shower room

CJ/T 184-2003 不锈钢塑料复合管

Stainless steel-plastic composite pipes

JIS A 5536 ERRATUM 1:2003 JIS A5536 勘误表 1

JIS A 5536:2003/Erratum

DIN EN 1158:2003 建筑五金件.门调节装置.要求和试验方法

The document specifies requirements for door coordinator devices for double leaf swing doors fitted with door closers, and includes both separately mounted devices and mechanisms incorporated in door closers. Door coordinator devices are used where it is necessary to ensure the correct sequence of closing of double leaf swing doors, e.g. doors with rebated meeting stiles. Door coordinator devices manufactured in accordance with this European Standard are recommended for use wherever there is a requirement for reliable sequential closing of double leaf swing fire/smoke doors incorporating rebated meeting stiles.

Building hardware - Door coordinator devices - Requirements and test methods (includes amendment A1:2002); German version EN 1158:1997 + A1:2002

DIN EN 1155:2003 建筑物五金件.旋转门电动定位装置.要求和试验方法

The document specifies requirements for separate hold-open devices and also for hold-open mechanisms incorporated in a door closer. Electrically powered hold-open devices for swing doors manufactured according to this European Standard can hold a swing door at a fixed position or can allow the door to swing freely. In each case interruption of the electrical supply will cause the controlled door to close positively.

Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods (includes amendment A1:2002); German version EN 1155:1997 + A1:2002

DIN EN 1154:2003 建筑物五金件.受控门锁装置.要求和试验方法

The scope is limited to manually operated door closing devices where the energy for closing is generated by the user upon opening the door, such that when the door is released, it returns to a closed position, in a controlled manner. Devices such as spring hinges, which do not exert a checking control during door closing, are outside the scope of this standard. Door closing devices (door closers) manufactured in accordance with this standard are recommended for use wherever there is a requirement for reliable closing control of a door.#,,#

Building hardware - Controlled door closing devices - Requirements and test methods (includes amendment A1:2002); German version EN 1154:1996 + A1:2002

DIN 18257:2003 建筑用小五金.安全门板.定义、测量、要求和标记

Building hardware - Security plates - Definitions, measurements, requirements, marking

ANSI/BHMA A156.7-2003 样板铰链尺寸

Covers the requirements for the length, width, thickness, offset, and screw hole spacing for builders template hinges. Included in the standard are hinge identification symbols and screw sizes. Methods for identifying template hinges that conform to the Standard are provided.

Template Hinge Dimensions

ANSI A250.6-2003 标准钢制门和框架加强五金件

It is the intention of this publication to furnish users and prospective users of standard steel doors and frames with practical information regarding accepted design methods for reinforcing and recommended practices for proper field preparation for buil

Hardware Reinforcing on Standard Steel Doors and Frames

ASTM F1758-03 安全等级双开式弹簧门用安全铰链的标准试验方法

1.1 These test methods cover the apparatus, procedures, and acceptance conditions for evaluating the normal operating performance characteristics and the performance characteristics under assault conditions of hinges used in swinging door assemblies in detention and correctional institutions. These types of hinges are described in detail in 3.1.6, 3.1.9, and 3.1.22. Thus, these test methods only give an indication of the performance characteristics of hinges in actual service. Such variables as installation and maintenance conditions which have a potential impact on performance characteristics are not considered.1.2 It is the intent of these test methods to help ensure that detention hinges (reference to hinges is inclusive of a continuous hinge) perform at or above minimum acceptable levels to confine inmates, to delay and frustrate escape attempts, and to resist vandalism and assault conditions. It is recognized that in order to meet the intent of these test methods, door, frame and lock assemblies must be compatible with the level of performance required by Test Methods F 1450 and F 1577.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.1.4 The values stated in inch-pound units are to be regarded as the standard. The values in parentheses are for information only.1.5 Consult NFPA 80 for Fire Doors Windows concerning hinge requirements on fire doors.

Standard Test Methods for Detention Hinges Used on Detention-Grade Swinging Doors

QB/T 2563-2002 淋浴屏通用技术条件

本标准规定了淋浴屏的定义、要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于安装在家庭、宾馆等用于人体淋浴、水温不大于80℃的淋浴屏。

General specification for shower screen

DIN EN 1935:2002 建筑五金件.单轴铰链.要求和试验方法

Building hardware - Single-axis hinges - Requirements and test methods; German version EN 1935:2002

DIN 18255:2002 建筑用五金件.门把手、背面板和门框.定义、尺寸、要求和作标记

The doucment applies to door handles and door plates, to armatures comprised of door handles and door plates as well as to door rosets for internal doors in connection with the respective mortice locks according to EN 1906.#,,#

Building hardware - Door lever handles, backplates and escutcheons - Definitions, dimensions, requirements and marking

NF P26-322*NF EN 1935:2002 建筑五金.单轴链接件的要求和试验方法.

Building hardware - Single-axis hinges - Requirements and tests methods.

BS EN 1906:2002 建筑五金.门拉手和旋钮装置.要求和试验方法

This European Standard specifies test methods and requirements for spindle and fastening elements, operating torques, permissible free play and safety, free angular movement and misalignment, durability, static strength and corrosion resistance for sprung and unsprung lever handles and knobs for doors on backplates or roses. This standard is applicable only to lever handles and knobs that operate a latch or a lock. It states four categories of use according to the frequency and other conditions of use. Compliance with this European Standard ensures a margin of strength in excess of that needed for normal operation. Additional requirements are needed for special safety furniture which is suitable for use in situations where there is a high risk of falling. Since special safety furniture is not essential in every situation, this European Standard provides for additional safety requirements (see 5.13) which are only necessary when the manufacturer states that the safety furniture is claimed to conform to these requirements. This standard states five grades of security. Grade 0 according to requirements stated in the main part of this standard. Grades 1 to 4 are stated according to requirement for security lock furniture for use on burglary resistant doors (see annex A). These additional security requirements are necessary only when the manufacturer states that the products are claimed to have a high level of security, which is not essential in every situation. The suitability of lock or latch furniture for use on fire/smoke door assemblies is determined by fire performance tests conducted in addition to the performance tests required by this standard. Since suitability for use on fire/smoke door assemblies is not essential in every situation, the manufacturer has the option of stating whether the furniture is claimed to conform to these additional requirements or not. If so stated the additional requirements given in annex C are necessary.

Building hardware - Lever handles and knob furniture - Requirements and test methods