Y72 金属丝制品 标准查询与下载

QB/T 2190-2010 钢丝刷

本标准规定了钢丝刷的产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于钢丝、木柄及塑柄制造的工业用刷。

Steel wire brush

ASTM E11-09e1 用于试验的金属丝布和筛的标准规格

1.1 This document specifies the technical requirements for; the woven wire test sieve cloth (sieve cloth) used in test sieves, the construction of test sieves, standard and non-standard test sieve frame sizes, and test procedures used to inspect sieve cloth and the test sieves. This Specification applies to test sieves manufactured with sieve cloth having a nominal aperture size ranging from 125 millimeters (mm) down to 20 micrometers (μm). 1.2 Additional reference information can be found in Specifications E 161, E 323, E 2016, and in Test Methods C 430 and E 2427. 1.3 The values stated in SI units shall be considered standard for the dimensions of the sieve cloth openings and the wire diameters used in the sieve cloth. The values stated in inch-pound units shall be considered standard with regard to the sieve frames, pans, and covers. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves

QB/T 2959-2008 钢板网

本标准规定了钢板网的术语和定义、型式尺寸、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于工业与民用建筑、装备制造业、交通、水利、市政工程以及耐用消费品等方面的钢板网，通常采用低碳钢、不锈钢等材料。

Expanded steel

JIS G 3552:2007 链节铁丝网

この規格は，フエンス用，落石防止さく用，落石防護用及び法面保護用に使用する目的で，着色塗装亜鉛めっき鉄線,合成樹脂被覆鉄線及び亜鉛めっき鉄線を用いて製造したひし形金網について規定する。

Chain link wire netting

ASTM E2016-06 工业金属丝筛布的标准规范

1.1 This specification covers industrial woven wire fabric, referred to as wire cloth, for general use including the separation of particles. Wire cloth can be made of any primary metal or metal alloy wire that is suitable for weaving. This specification does not apply to the following special types of wire cloth: filter cloth or dutch weave (see ), fourdrinier and cylinder cloth, galvanized hardware cloth, insect wire screening, spiral weave wire cloth, testing sieve cloth, or welded wire cloth.1.2 The values stated in inch-pound units shall be regarded as the standard. The values given in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Industrial Woven Wire Cloth

JIS G 3555:2004 机织金属丝布

この規格は，なまし鉄線製織金網，亜鉛めっき鉄線製織金網及びステンレス鋼線製織金網(以下，織金網という。)について規定する。ただし，あとめっき() したものを除く。

Woven wire cloth

JIS G 3553 ERRATUM 1:2003 JIS G3553 勘误表 1

ERRATUM

JIS G 3554 ERRATUM 1:2003 JIS G3554 勘误表 1

ERRATUM

JIS G 3552 ERRATUM 1:2003 JIS G3552 勘误表 1

ERRATUM

JIS G 3553:2002 波纹金属丝网

この規格は，亜鉛めっき鉄線製クリンプ金網及びステンレス鋼線製クリンプ金網（以下，クリンプ金網という。)について規定する。ただし，亜鉛めっき鉄線製クリンプ金網については，あとめっき(りしたものを除く。

Crimped wire cloth

JIS G 3554:2002 六角形铁丝网

この規格は，塩化ピニル被覆なまし鉄線製きっ甲金網，亜鉛めっき鉄線製きっ甲金網及びステンレス鋼線製きっ甲金網(以下，きっ甲金網という。)について規定する。ただし，亜鉛めっき鉄線製きっ甲金網については，あとめっき() したものを除く。

Hexagonal wire netting

JIS G 3552:2002 链节铁丝网

Chain link wire netting

JIS G 3556:2002 工业用编织金属网

この規格は，ふるい分け用の工業用織金網(以下，織金網という。)に関する用語を定義し，許容差，要求事項及び試験方法を規定ずる。

Industrial woven wire cloth

DIN 4935-1:2002 井用不锈钢绕丝滤管.第1部分:带连续槽隙和螺纹连接的DN 40至 DN 100

The document describes the requirements for wire wrapped screens of stainlessteel for construction of drilled wells for ground water catchment.

Wire wrapped screens of stainless steel for wells - Part 1: DN 40 to DN 100 with continuous slots and threaded connection

JIS G 3551:2000 焊接钢丝和钢丝网

Welded steel wire and bar fabrics

BS ISO 9044:1999 工业用金属丝织物.技术要求和试验

This International Standard defines terms regarding industrial woven wire cloth for screening purposes and specifies tolerances, requirements and test methods. It applies to industrial woven wire cloth with square apertures, made of steel, stainless steel or non-ferrous metals, (see ISO 4783-2). It does not apply to woven wire cloth coated after weaving nor does it apply to pre-crimped and welded wire screens which are covered in ISO 4783-3 and ISO 14315. It is of limited application to woven wire cloth used for purposes other than screening which may necessitate other requirements. The alternative requirements may be agreed between the purchaser and the supplier at the time of placing the order.

Industrial woven wire cloth - Technical requirements and testing

ISO 9044:1999 工业用金属丝编织网 技术要求和试验

This International Standard defines terms regarding industrial woven wire cloth for screening purposes and specifies tolerances, requirements and test methods. It applies to industrial woven wire cloth with square apertures, made of steel, stainless steel or non-ferrous metals, (see ISO 4783-2). It does not apply to woven wire cloth coated after weaving nor does it apply to pre-crimped and welded wire screens which are covered in ISO 4783-3 and ISO 14315. It is of limited application to woven wire cloth used for purposes other than screening which may necessitate other requirements. The alternative requirements may be agreed between the purchaser and the supplier at the time of placing the order.

Industrial woven wire cloth - Technical requirements and testing

ASTM E2016-99 工业纺织金属丝布规范

1.1 This specification covers industrial woven wire fabric, referred to as wire cloth, for general use including the separation of particles. wire cloth can be made of any primary metal or metal alloy wire that is suitable for weaving. This specification does not apply to the following special types of wire cloth: filter cloth or dutch weave (see Appendix X1), fourdrinier and cylinder cloth, galvanized hardware cloth, insect wire screening, spiral weave wire cloth, testing sieve cloth, or welded wire cloth. 1.2 The values stated in inch-pound units shall be regarded as the standard. The values given in parentheses are information only.

Standard Specification for Industrial Woven Wire Cloth

ASTM E2016-99e1 工业纺织金属丝布规范

1.1 This specification covers industrial woven wire fabric, referred to as wire cloth, for general use including the separation of particles. Wire cloth can be made of any primary metal or metal alloy wire that is suitable for weaving. This specification does not apply to the following special types of wire cloth: filter cloth or dutch weave (see Appendix X1), fourdrinier and cylinder cloth, galvanized hardware cloth, insect wire screening, spiral weave wire cloth, testing sieve cloth, or welded wire cloth.1.2 The values stated in inch-pound units shall be regarded as the standard. The values given in parentheses are for information only.

Standard Specification for Industrial Woven Wire Cloth

ANSI/ASTM E2016:1999 工业纺织金属丝布规范

This practice is intended to measure and evaluate fenestration assemblies and impact protection systems for resistance to impact energies under specified conditions. Window and dooor assemblies covered by this practice also include individual components such as the glazing in-fill. This practice is a standard procedure for determining the ability of glazed panels, fenestration assemblies, fenestration components and impact protection systems to resist applied impact energies. Warning: This standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Specification for Industrial Woven Wire Cloth