Y75 服装、鞋、帽综合 标准查询与下载

FZ/T 82002-2006 缝制帽

本标准规定了缝制帽的要求、检验（测试）方法、检验分类规则、标志、包装、运输和贮存等全部技术要求。 本标准适用于以纺织机织物为主要原料生产的缝制帽。

Woven caps

FZ/T 80003-2006 纺织品与服装 缝纫型式 分类和术语

本标准规定了各种缝纫型式的分类、图示和标示。虽然没有包含所有的方面，但解释了许多最常用的缝纫类型。 本标准适用于服装工业的常用缝纫型式，所有的图示只表示了缝料布局的截面构造。 本标准应与ISO 4915配合使用。

Textiles and garments Seam types Classification and terminology

JIS L 0111:2006 服装的人体测量用术语汇编

この規格は，衣料のために用いる身体に関する主な用語について規定する。

Glossary of terms used in body measurements for clothes

FZ/T 80007.2-2006 使用粘合衬服装耐水洗测试方法

本标准规定了服装经过一次完整的洗涤程序测试过程（一次洗涤程序和一次干燥过程）后，测定其尺寸变化率、剥离强力变化率及评定外观形态变化的试验方法。 本标准适用于使用粘合衬的各类可水洗服装的耐水洗测试。本标准也同样适用于服装面料与粘合衬粘合的衣片或小样的耐水洗测试。

Wet wash resistance test method for garments used adhesive interlining

FZ/T 80007.1-2006 使用粘合衬服装剥离强力试验方法

本标准规定了各类使用粘合衬服装剥离强力的测试方法。 本标准适用于各类使用粘合衬服装的剥离强力测试。本标准也适用于衣片及小样的剥离强力测试。

Test method of peeled off strength value for garments used adhesive interlining

FZ/T 80007.3-2006 使用粘合衬服装耐干洗测试方法

本标准规定了使用粘合衬服装耐干洗测试方法，用商业干洗机来测定经四氯乙烯（全氯乙烯）或烃类溶剂洗涤后服装的尺寸变化率、剥离强力变化率及评定外观形态的变化。 本标准适用于使用粘合衬的各类可干洗服装的耐干洗测试。本标准同时适用于服装面料与粘合衬粘合的衣片或小样的耐干洗测试。

Dry wash resistance test method for garments used adhesive interlining

NF G07-187*NF EN 1103:2006 纺织品.服装织物.测定燃烧特性的详细程序

Textiles - Fabrics for apparel - Detailed procedure to determine the burning behaviour.

FZ/T 80004-2006 服装成品出厂检验规则

本标准规定了服装成品出厂检验的规则。 本标准适用于以纺织织物为主要原料，成批生产的服装成品的出厂检验。

Rule for garments delivery inspection

ASTM F1720-06 用加热人体模特测量睡袋保温性的标准试验方法

This test method can be used to quantify and compare the insulation provided by sleeping bags or sleeping bag systems. It can be used for material and design evaluations. The measurement of the insulation provided by clothing (see Test Method D 1291) and sleeping bags is complex and dependent on the apparatus and techniques used. It is not practical in a test method of this scope to establish details sufficient to cover all contingencies. Departures from the instructions in this test method may lead to significantly different test results. Technical knowledge concerning the theory of heat transfer, temperature and air motion measurement, and testing practices is needed to evaluate which departures from the instructions given in this test method are significant. Standardization of the method reduces, but does not eliminate, the need for such technical knowledge. Any departures should be reported with the results.1.1 This test method covers determination of the insulation value of a sleeping bag or sleeping bag system. It measures the resistance to dry heat transfer from a constant skin temperature manikin to a relatively cold environment. This is a static test that generates reproducible results, but the manikin cannot simulate real life sleeping conditions relating to some human and environmental factors, examples of which are listed in the introduction.1.2 The insulation values obtained apply only to the sleeping bag, as tested, and for the specified thermal and environmental conditions of each test, particularly with respect to air movement past the manikin.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Measuring Thermal Insulation of Sleeping Bags Using a Heated Manikin

SN/T 0252-2005 进出口砂洗真丝服装检验规程

本标准规定了进出口砂洗真丝服装的抽样、检验及检验结果的判定。 本标准适用于进出口砂洗真丝服装的检验。

Rules for the inspection of sandwash silk dressing for import and export

SN/T 1522-2005 儿童服装安全技术规范

本标准规定了儿童服装的安全技术要求、试验方法、抽样和检验规则。儿童服装的其他性能按有关的产品标准执行。 本标准适用于各类儿童穿着的服装。

The safety technical code for children clothing

NF G03-001-3:2005 服装尺寸的名称与符号.第3部分:测量方法和间隔时间

Size designation of clothes - Part 3 : measurements and intervals.

ASTM F2370-05 用发汗人体模型测量服装耐蒸发性的标准试验方法

This test method can be used to quantify and compare the evaporative resistance provided by different clothing systems. The evaporative resistance values for ensembles measured under isothermal conditions can be used in models that predict the physiological responses of people in different environmental conditions. The measurement of the evaporative resistance provided by clothing is complex and dependent upon the apparatus and techniques used. It is not practical in a test method of this scope to establish details sufficient to cover all contingencies. Departures from the instructions in this test method have the potential to lead to significantly different test results. Technical knowledge concerning the theory of heat transfer, moisture transfer, temperature, and air motion measurement, and testing practices is needed to evaluate which departures from the instructions given in this test method are significant. Standardization of the method reduces, but does not eliminate, the need for such technical knowledge. Report any departures with the results.1.1 This test method covers the determination of the evaporative resistance of clothing ensembles. It describes the measurement of the resistance to evaporative heat transfer from a heated sweating thermal manikin to a relatively calm environment.1.1.1 This is a static test that provides a baseline clothing measurement on a standing manikin.1.1.2 The effects of body position and movement are not addressed in this test method.1.2 The evaporative resistance values obtained apply only to the particular ensembles evaluated and for the specified environmental conditions of each test, particularly with respect to air movement and sweating simulations.1.3 Evaporative resistance values reported in SI units shall be regarded as standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Measuring the Evaporative Resistance of Clothing Using a Sweating Manikin

ASTM D7019-05 胸罩、带肩带女式长内衣、女式贴身内衣裤和内衣织物的标准性能规范

1.1 This performance specification covers fabrics used in brassieres underwear, slips, and lingerie.1.2 These requirements apply to the length and width directions for those properties where each fabric direction is pertinent.1.3 The following safety hazards caveat pertains only to the test methods described in this performance specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Standard Performance Specification for Brassiere, Slip, Lingerie and Underwear Fabrics

ASTM F1291-05 利用加热的人体模型测量服装隔热性能的标准试验方法

This test method can be used to quantify and compare the insulation provided by different clothing systems. For example, variations in the design and fabric used in component garments can be evaluated. The effects of garment layering, closure, and fit can be measured for clothing ensembles. The insulation values for ensembles can be used in models that predict the physiological responses of people in different environmental conditions. The measurement of the insulation provided by clothing is complex and dependent on the apparatus and techniques used. It is not practical in a test method of this scope to establish details sufficient to cover all contingencies. Departures from the instructions in this test method have the potential to lead to significantly different test results. Technical knowledge concerning the theory of heat transfer, temperature, and air motion measurement, and testing practices is needed to evaluate which departures from the instructions given in this test method are significant. Standardization of the method reduces, but does not eliminate, the need for such technical knowledge. Report any departures with the results. Report the insulation values in SI units or clo units as standard procedure. Conversion factors to other units are given in Test Method D 1518.1.1 This test method covers the determination of the insulation value of clothing ensembles. It describes the measurement of the resistance to dry heat transfer from a heated manikin to a relatively calm, cool environment.1.1.1 This is a static test that provides a baseline clothing measurement on a standing manikin.1.1.2 The effects of body position and movement are not addressed in this test method.1.2 The insulation values obtained apply only to the particular ensembles evaluated and for the specified environmental conditions of each test, particularly with respect to air movement.1.3 The values stated in either clo or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other.1.4 The evaporative resistance of a clothing ensemble can be measured in accordance with Test Method F 2370.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin

ASTM D7017-05 雨衣和通用防水涂覆织物的标准性能规范

1.1 This performance specification covers rainwear and all-purpose water-repellent coat outer fabrics composed of any textile fiber or mixture of textile fibers. 1.2 This performance specification is not applicable to fabrics used for linings and interlinings.1.3 These requirements apply to the length and width directions for those properties where fabric direction is pertinent.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Specification for Rainwear and All-Purpose, Water-Repellent Coat Fabrics

ASTM D7021-05 浴衣、晨衣、女式长睡衣、便装和宽松薄裤织物的标准性能规范

1.1 This performance specification covers fabrics used in bathrobes, dressing gowns, negligee, nightgown, and pajamas. 1.2 These requirements apply to the length and width directions for those properties where each fabric direction is pertinent.1.3 The following safety hazards caveat pertains only to the test methods described in this performance specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Standard Performance Specification for Bathrobe, Dressing Gown, Negligee, Nightgown, and Pajama Fabrics

FZ/T 80009-2004 服装制图

本标准规定了服装制图中图纸的大小、制图比例、图线、字体、尺寸标注、制图符号等技术特征。 本标准适用于服装设计、生产、技术、教学和贸易以及与其相关的领域。

Pattern-making

ARMY MIL-DTL-14650 B (1)-2004 饰带的一般规格

This specification covers the general requirements for streamers used on Armed Forces flags and guidons(see 6.1).

STREAMERS, GENERAL SPECIFICATION FOR [Use In Lieu Of: ARMY MIL-S-0014650]

KS M ISO 9407:2004 鞋号.尺寸和标志的蒙多波因特(mondopoint)系列

이 규격은 몬도포인트(Mondopoint)로 알려진 신발의 치수 분류 시스템의 기본적

Shoes sizes－Mondopoint system of sizing and marking