Y75 服装、鞋、帽综合 标准查询与下载

KS K ISO 15384:2012 消防用防护服.野外消防服的实验室试验方法和性能要求

이 표준은 임야 화재 진화 및 관련된 활동 시 착용하는 보호복에 대한 시험방법과 최소 요구

Protective clothing for firefighters－Laboratory test methods and performance requirements for wildland firefighting clothing

KS K ISO 14877:2012 用粒状磨料进行喷砂操作用防护服

이 표준은 압축공기 또는 기계적 방법으로 입자형 연마재로 표면을 처리하기 위한 연마재 분사

Protective clothing for abrasive blasting operations using granular abrasives

KS K ISO 9151:2012 耐热阻燃防护服.火焰暴露下近火传热的测定方法

이 표준은 보호복에 사용되는 재료 혹은 재료 구성품에 대한 열 전달 비교 방법을 규정한다.

Protective clothing against heat and flame-Determination of heat transmission on exposure to flame

KS K ISO 11393-1:2012 手持式链锯使用者用防护服装.第2部分:抗链锯切割试验用由飞轮驱动的试验机械

이 표준은 손에 쥐고 사용하는 체인 톱에 대한 절단 저항성을 평가하기 위한 시험 장비 및

Protective clothing for users of hand-held chain-saws－Part 1：Test rig driven by a flywheel for testing resistance to cutting by a chain-saw

KS K ISO 14460:2012 赛车驾驶员的防护服装.防热防火性能要求和试验方法

이 표준은 자동차 경주 운전자용 보호복의 열과 불꽃에 대한 보호 요구성능 및 시험방법, 요

Protective clothing for automobile racing drivers－Protection against heat and flame－Performance requirements and test methods

KS K ISO 17492:2012 隔热和防火服.曝露于火和辐射热时防护服的热传递的测定

이 표준은 동시에 대류열 및 복사열에 노출될 경우, 수평으로 장착된 방염 섬유 재료의 열

Clothing for protection against heat and flame－Determination of heat transmission on exposure to both flame and radiant heat

KS K ISO 13999-3:2012 防护服.防止被手持刀具割伤和刺伤用的手套和手臂保护物.第3部分:编织物、皮革和其他编织材料的冲击切割试验

이 표준은 보호복, 보호 장갑 및 팔 보호대에 사용되는 천, 가죽, 기타 재료에 대한 충격

Protective clothing－Gloves and arm guards protecting against cuts and stabs by hand knives－Part 3：Impact cut test for fabric, leather and other materials

KS K ISO 16603:2012 防止接触血液和体液的防护服.防护服材料防止血液和体液渗透性的测定.使用人造血液的试验方法

이 표준은 혈액 및 체액에 대한 보호복 재료의 침투 저항성을 측정하는 방법에 대해 규정한다

Clothing for protection against contact with blood and body fluids-Determination of the resistance of protective clothing materials to penetration by blood and body fluids-Test method using synthetic blood

KS K 7505-2012 马裤

이 표준은 남성 및 여성용 승마 바지에 대하여 규정한다.

Breeches

EN ISO/TR 16178:2012 鞋类.鞋类与其组件中潜在的重要物质

Footwear - Critical substances potentially present in footwear and footwear components

EN ISO/TS 16179:2012 鞋类.鞋类与其组件中潜在的重要物质.鞋类中有机锡化合物的测定

Footwear - Critical substances potentially present in footwear and footwear components - Determination of organotin compounds in footwear materials

EN ISO/TS 16186:2012 鞋类.鞋类与其组件中潜在的重要物质.鞋类中富马酸二甲酯(DMFU)的定量测定法

Footwear - Critical substances potentially present in footwear and footwear components - Test method to quantitatively determine dimethyl fumarate (DMFU) in footwear materials

QB/T 4223-2011 无油烟炒锅

本标准规定了无油烟炒锅的术语和定义、产品分类、要求、试验方法、检验规则、标志、标签、说明书、包装、运输、贮存。 本标准适用于基材为金属或复合金属的家用无油烟炒锅。

Smokeless wok

EN ISO/TS 16181:2011 鞋类.鞋类与其组件中潜在的重要物质.鞋类中邻苯二甲酸酯的测定

Footwear - Critical substances potentially present in footwear and footwear components - Determination of phthalates in footwear materials

ASTM D5585-11e1 尺寸范围为00-20的成年女性身体测量的标准表格

The use of the body measurement information in Table 1 and Table 2 will assist manufacturers in developing patterns and garments that are consistent with the current anthropometric characteristics of the population of interest. This practice should in turn reduce or minimize consumer confusion and dissatisfaction related to apparel sizing. (Also refer to ISO 3635.) Three-dimensional avatars depicting each of the missy sizes and sub category curvy and straight on certain measures, were created by Alvanon, Inc. and included in this standard to assist manufacturers in visualizing the posture, shape, and proportions generated by the measurements charts in the accompanying tables. (Avatar 1-6) See Fig. 1 and Fig. 2. TABLE 1 Body Measurements, Inch-Pound Units Size 0002468101214161820 Body Weight (Mean), lb N/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/A Body Weight (Range), lb N/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/A Girth Measurements, in.0002468101214161820 Head Girth21¼21¼21½21½

Standard Tables of Body Measurements for Adult Female Misses Figure Type, Size Range 00ndash;20

ASTM D6193-11 缝线和接缝的标准操作规程

Seam engineering, the determination of the best stitch type, seam configuration, and thread type which should be used for a particular assembly, requires a thorough knowledge of many variables. The improper selection of any one component can result in failure of the sewn junction, and ultimately failure of the product manufactured. General Characteristics8212;The characteristics of a properly constructed sewn seam are strength, elasticity, durability, security, and appearance. These characteristics must be balanced with the properties of the material to be joined to form the optimum sewn seam. The end use of the item will govern the relative importance of these characteristics. The selection of the seam type and stitch type should be based upon these considerations. Strength8212;The seam efficiency of the sewn seam should be as high as possible. This will produce sewn seam strength with a balanced construction that will withstand the forces encountered in the use of the sewn item. The elements affecting the strength of a sewn seam are: Fabric type and strength, Seam type, Stitch type, Stitch density (spi), Thread tension, and Thread strength. Elasticity8212;The elasticity of a sewn seam should be slightly greater than that of the material which it joins. This will enable the material to support its share of the forces encountered for the intended end use of the sewn item. The elasticity of a sewn seam depends upon: Fabric type and strength, Seam type, Stitch type, Stitch density (spi), Thread tension, and Thread elasticity. Durability8212;The durability of a sewn seam depends largely upon its strength relative to the elasticity of the seam and the elasticity of the material. However, in less elastic, tightly woven or dense materials, there is a tendency for the plies to “work” or slide on each other. To form a durable sewn seam in these types of fabrics, the thread size must be carefully chosen. The stitch density also needs to be carefully determined for the material so as not to cause excess tension which will unbalance the elasticity and cause puckering. It is also important to minimize abrasion and wear by contact with outside agencies to promote durability. Security8212;The security of a sewn seam depends chiefly upon the stitch type, spi, and its susceptibility to become unraveled. The stitch must be well set to the material to prevent snagging that can cause rupture of the thread and unraveling of certain stitch types. Appearance8212;The appearance of a sewn seam generally is governed by the proper relationship between the size and type of thread, the stitch density, and the texture and weight of the fabric. In addition to these general characteristics, the technique and skill of the sewing machine operators also govern the appearance of the sewn seams. Some of the factors which will adversely affect the appearance are shown in Table 1.1.1 This practice covers the requirements and characteristics of stitches and seams used in the fabrication of sewn items.1.2 This practice identifies the category, formation, and general purpose for stitch types and seam types used in the fabrication of sewn items.1.3 Subsequent to a general discussion of stitches and seams that include schematic indices, this practice is comprised of the following sections that are listed in the order in which they appear:......

Standard Practice for Stitches and Seams

ASTM D5585-11 尺寸范围为00-20的成年女性身形测量的标准表格

1.1 These tables list body measurements of adult female misses figure Type sizes 00 through 20. Although these are body measurements, they can be used as a baseline in designing apparel for Missy in this size range when considering such factors as fabric type, ease for body movement, styling, and fit. 1.2 These tables list body measurements for the complete range of Missy sizing. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. ^REFERENCE: ASTM Standards: D 123 Terminology Relating to Textile Materials D 5219 Terminology Relating to a Body Dimension for Apparel Sizing ISO Standards: ISO 3635 Size Designation of Clothes, Definitions, and Body Measurement Procedures

Standard Tables of Body Measurements for Adult Female Misses Figure Type, Size Range 00x2013;20

DB44/T 842-2010 工业锅炉水处理作业导则

本标准规定了工业锅炉水处理作业的基本要求和内容。 本标准适用于额定出口蒸汽压力小于3.8MPa、以水为介质的锅炉的补给水处理、锅内水处理、停炉防锈蚀保护、水质监督作业的要求。

Guidelines for Water Treatment of Industrial Boilers

SN/T 1932.10-2010 进出口服装检验规程 第10部分：防寒服

SN/T 1932的本部分规定了进出口防寒服的外观质量和内在质量的要求，以及抽样、检验条件、检验方法、检验程序和检验结果的判定。 本标准适用于以各种纺织物为面料，以各种天然纤维、化学纤维及其加工制品等为填充物或制成活里用料的进出口防寒服的检验（羽绒服装除外）。

Rules for inspection on import and export garment.Part 10:Cold protective clothing

EN 13457:2004+A1:2010 鞋类、皮革和仿皮革制品制造机.分裂、刮削、切割、上胶和胶水烘干机.安全要求

This document applies to splitting, skiving, edge trimming, strip cutting, cementing and cement drying machines used in the manufacture of footwear, leather and imitation leather goods and other related components. This document does not apply to: trimming machines with rotary milling tool for the purpose of trimming edges of material, see EN 930; splitting and band knife machines used in tanneries, see EN 13112; portable machines. This document specifies safety requirements for construction, transport, installation, adjustment, setting, teaching or process change-over, operation, cleaning, maintenance, decommissioning, dismantling and, as far as safety is concerned, disposal for machines mentioned in 1.1. It takes account of intended use, foreseeable misuse, component and system failure. This document deals with significant hazards relevant to the footwear, leather and imitation leather goods manufacturing industries. (For a list of hazards see Clause 4.) The document does not deal with precise technical measures for reducing the risks of fumes and dusts detrimental to health. The use of machines falling within the scope of this document for purposes other than those specified in 1.1, may give rise to hazards not considered during its preparation. This document also applies to equipment for material handling and operations which are an integral part of the machine. This document assumes the machines are operated by adequately trained persons are used with adequate workplace lighting conforming the local regulations or to EN 12464-1. This document is not applicable to splitting, skiving, edge trimming, strip cutting, cementing and cement drying machines which are manufactured before the date of its publication as EN.

Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements