Y81 家具制品 标准查询与下载

DB44/T 2026-2017 金属玻璃家具安全技术规范

本标准规定了金属玻璃家具的术语和定义、分类、要求、试验方法、检验规则、标志、使用说明、包装、运输、贮存。 本标准适用于室内用金属玻璃家具。

Safety technical specification for metal glass furniture

BS EN 1272:2017 儿童护理用品 桌上安装的椅子 安全要求及测试方法

Child care articles. Table mounted chairs. Safety requirements and test methods

LY/T 2871-2017 木（竹）质容器通用技术要求

General technical requirements for wooden (bamboo) containers

DIN EN 581-3:2017 室外家具.野营区、住宅区和商业区用桌椅.第3部分:桌子的机械安全要求和试验方法;德文版本EN 581-3-2017

Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 3: Mechanical safety requirements for tables; German version EN 581-3:2017

BS EN 581-1:2017 户外家具 用于露营、家庭和合同使用的座椅和桌子 一般安全要求

Outdoor furniture. Seating and tables for camping, domestic and contract use. General safety requirements

BS ISO 24496:2017 办公家具.办公椅.尺寸的测定方法

Office furniture. Office chairs. Methods for the determination of dimensions

EN 581-1:2017 户外家具-露营,家用和公司用椅子和桌子-第1部分:一般安全要求

This part of EN 581 specifies the general safety requirements for outdoor seating and tables for camping, domestic and contract for use by adults, without regard to materials, design/construction or manufacturing processes. It does not apply to seating for spectator facilities. It does not include requirements for the durability of upholstery materials, castors, reclining and tilting mechanisms and seat height adjustment mechanisms. Mechanical safety requirements are covered by EN 581-2 for seating and EN 581-3 for tables. Annex A (informative) is a schematic presentation of requirements and conditions concerning shear and squeeze points. Annex B (informative) is a rationale concerning fingers injury.

Outdoor furniture - Seating and tables for camping@ domestic and contract use - Part 1: General safety requirements

DIN EN 15372:2017 家具.强度、耐久性和安全性.非家用桌子的要求;德文版本EN 15372-2016

Furniture - Strength, durability and safety - Requirements for non-domestic tables; German version EN 15372:2016

BS EN 581-3:2017 户外家具 用于露营、家庭和合同使用的座椅和桌子 桌子的机械安全要求

Outdoor furniture. Seating and tables for camping, domestic and contract use. Mechanical safety requirements for tables

QB/T 5034-2017 布衣柜

Cloth wardrobe

QB/T 5033-2017 藤椅

rattan chair

DIN EN 581-2:2017 室外家具.野营区、住宅区和商业区用桌椅.第2部分:接卸安全要求座椅测试方法;德文版本EN 581-2-2015+AC-2016

Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 2: Mechanical safety requirements and test methods for seating; German version EN 581-2:2015 + AC:2016

EN 581-3:2017 户外家具-露营,家用和公司用椅子和桌子-第3部分:桌子机械安全要求

This European Standard specifies the minimum requirements for the safety, strength and durability of all types of outdoor tables for adults, without regard to materials, design/construction or manufacturing processes. It does not apply to street furniture. With the exception of stability tests the standard does not provide assessment of the suitability of any storage features included in tables. It does not include requirements for the durability of castors/wheels and height adjustment mechanisms. It does not include requirements for electrical safety. It does not include requirements for the resistance to ageing and degradation caused by light, temperature and moisture.

Outdoor furniture - Seating and tables for camping@ domestic and contract use - Part 3: Mechanical safety requirements for tables

ASTM F3118-17a 婴儿用倾斜睡眠产品的标准消费者安全规格

1.1 This consumer safety specification establishes safety performance requirements, test methods, and labeling requirements to minimize the hazards to infants presented by infant inclined sleep products as identified in the introduction. 1.2 This consumer safety specification is intended to minimize the risk of injuries to infants resulting from normal use and reasonably foreseeable misuse or abuse of infant inclined sleep products. 1.3 This consumer safety performance specification covers a free standing product with an inclined sleep surface primarily intended and marketed to provide sleeping accommodations for an infant up to 5 months old or when the infant begins to roll over or pull up on sides, whichever comes first. It also covers a smaller product intended for newborns up to 3 months old or when newborn begins to wiggle out of position or turn over in the product or weighs more than 15 lb (6.8 kg), whichever comes first. It also covers infant and newborn inclined sleep product accessories, which are attached to, or supported by, another product with the same age or abilities, or both, as the free standing products. If the inclined sleep product can be converted into a product for which another ASTM standard consumer safety specification exists, the product shall meet the applicable requirements of that standard. For example, an inclined sleep product that can have the recline angle adjusted below 10° shall also comply with the applicable requirements of Consumer Safety Specification F2194. 1.4 No infant inclined sleep product produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein. 1.5 The following precautionary caveat pertains only to the test method portion, Section 7, of this consumer safety specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Consumer Safety Specification for Infant Inclined Sleep Products

ASTM F404-17a 高脚椅的标准消费者安全规格

1.1 This consumer safety specification covers the performance requirements and methods of test to ensure the satisfactory performance of the high chair and high chairs created by using a high chair conversion kit and component(s) from another product. 1.2 This consumer safety specification is intended to minimize injuries to children resulting from normal usage and reasonably foreseeable misuse or abuse of high chairs. Note 1: This consumer safety specification is not intended to address accidents and injuries resulting from the interaction of older children with children in the high chair or the accidents resulting from abuse and misuse by persons over three years of age. 1.3 No high chair or high chair conversion kit produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 The following precautionary caveat pertains only to the test methods portion, Section 7, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Note 2: This consumer safety specification includes the following sections: Title Section Scope

Standard Consumer Safety Specification for High Chairs

ASTM E1590-17 床垫着火试验的标准试验方法

5.1 This test method provides a means of measuring a variety of fire-test-response characteristics resulting from burning a test specimen, mattress or mattress with foundation. After ignition using a propane gas burner, the test specimen is permitted to burn freely under well-ventilated conditions. The most important fire-test-response characteristic measured in this test method is the rate of heat release, which quantifies the intensity of the fire generated. 5.2 The rate of heat release is measured by the principle of oxygen consumption. Annex A3 discusses the assumptions and limitations. 5.3 This test method also provides measures of other fire-test-response characteristics, including smoke obscuration (as the rate of smoke release, total smoke released, or optical density of smoke), combustion gas release (as concentrations of combustion gases), and mass loss, which are important to making decisions on fire safety. 5.4 In the majority of fires, the most important gaseous components of smoke are the carbon oxides, present in all fires. They are indicators of the toxicity of the atmosphere and of the completeness of combustion. Measurement of concentrations of carbon oxides are useful for two purposes: (1) as part of fire hazard assessment calculations and (2) to improve the accuracy of heat release measurements. Other toxic combustion gases, which are specific to certain materials, are also indicators of the toxicity of the atmosphere, but are less crucial for determining combustion completeness and are optional measures; however, fire hazard assessment often requires their measurement. 5.5 The type of ignition chosen (flaming source) is common in both accidental and intentional fires in public occupancies. The test method is thus applicable to mattresses in public occupancies. Such facilities include, but are not limited to, health-care facilities, old age convalescent and board and care homes, and college dormitories and residence halls. 5.6 One of the following three configurations is to be used in this test method: 5.6.1 Test Configuration A—A test room with the following dimensions: 3.66 by 2.44 by 2.44 m (12 by 8 by 8 ft) high. 5.6.2 Test Configuration B—A test room with the following dimensions: 3.66 by 3.05 by 2.44 m (12 by 10 by 8 ft) high. 5.6.3 Test Configuration C—An open calorimeter (or furniture calorimeter). 5.7 Rooms of other dimensions are acceptable where it has been shown that equivalent test results are obtained. 5.8 Measurements in the three test ......

Standard Test Method for Fire Testing of Mattresses

BS EN 527-2:2016 办公家具.工作台.第2部分:安全性、强度和耐久性要求

Office furniture. Work tables. Safety, strength and durability requirements

NF D61-051*NF EN 12727:2016 家具.成排座椅.安全、强度和耐久性的要求

Furniture - Ranked seating - Requirements for safety, strength and durability

EN 527-2:2016 办公家具-工作台-第2部分:安全性,强度和耐久性要求

This European Standard specifies safety, strength and durability requirements for work tables and desks for office tasks to be undertaken in a seated, a sit-stand or standing position. It does not apply to other tables in the office area, which are covered by EN 15372. Annex A (informative) contains a test for the deflection of tables tops. Annex B (informative) contains an example of calculation of the stiffness of the structure.

Office furniture - Work tables - Part 2: Safety@ strength and durability requirements

DIN 4548:2016 工业钢存放和车间柜. 设计, 功能和安全要求, 试验和评估

Industrial steel storage and workshop cabinets - Design, functional and safety requirements, testing and evaluation