Y85 工艺美术品与其他日用品综合 标准查询与下载

UL 588 BULLETIN-2007 UL安全标准.季节性和节日装饰产品.评议和STP投票提交截止日期:2007年7月16日

Contains various revised and new requirements that were incorporated into the Standard for Christmas-Tree and Decorative-Lighting Outfits, UL 588. Pertains to lighting strings, seasonal products that ressemble christmas trees, wire types, temperature requirements, flexing test requirements, revised definition and strain relief requirements for ornaments, battery-operated product requirements, bubble light requirements, cord tag marking requirements, temporary use markings, instruction manual requirements, outdoor-use lampholder requirements, and various editorial changes.

UL Standard for Safety Seasonal and Holiday Decorative Products COMMENTS AND STP BALLOTS DUE: July 16, 2007

DB62/T 1700-2007 保 安 腰 刀

本标准规定了保安腰刀产品的分类、技术要求、使用要求、试验方法、检验规则及标志、包装、运输、贮存。本标准适用于普通碳素钢、黄铜、红铜、牛角等为原料，采用保安族传统工艺锻造、雕琢加工而成的民族传统生活用品和工艺品

security waist knife

DB62/T 1528-2007 酒泉夜光杯

本标准规定了夜光杯的技术要求、试验方法、检测规则及标志、包装运输、贮存。本标准适用于以祁连山天然玉石为原料，经精制加工而成的杯子等系列产品。

Jiuquan Luminous Cup

ASTM D6801-07 艺术品和其它材料最大自发加热温度的测量用标准试验方法

This test method provides a means of accelerating the tendency of a material toward spontaneous heating that may eventually lead to a fire. It is applicable to liquids and pastes. The spontaneous heating behavior of an oil-based material is affected by such factors as the availability of oxygen, the amount of driers present, the degree of polymerization of oils, the surface area of the cellulose material, measures to prevent heat dissipation, and the amount of oil in contact with cellulose material. The degree of spontaneous heating bears little relationship to the type of cellulose material to which an oil-based material comes in contact or whether or not oil soaked materials are first air dried. Small amounts of contaminants, such as oil paint, quartz dust, dirt or drier (for example, materials that might be found on a dirty, oil-soaked rag), can act as catalysts for this reaction.3 1.1 This test method covers a small-scale laboratory procedure to determine the self heating tendency of oil-based materials by exposure to elevated temperatures in air in a controlled semi-adiabatic system.1.2 This test method has been developed to address an urgent need to identify oil-based materials that may require labeling for spontaneous heating tendency. Studies based on this test method may allow the development of a practice to identify such oil-based materials.1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For safety concerns specific to disposal of solvent-soaked rags, see Appendix X1.

Standard Test Method for Measuring Maximum Spontaneous Heating Temperature of Art and Other Materials

ASTM D5517-07 工美材料中金属可萃取性的测定用标准试验方法

This acid extraction method is intended to indicate the solubility of metals from art materials in a weak acid medium. This test method may be useful as one indicator of the amount of metal that is readily available for absorption. It is not meant as a replacement for in vivo tests of absorption of a metal.5 Maximum levels of metal extraction are seen with this test method when results are 250 ppm or less. If results are greater than 250 ppm, the extractant volume should be increased to 100 mL or greater to keep metal levels in the eluate at a level of 5 ppm or less.6 1.1 This test method covers the extraction of metals from art materials using an extractant that simulates the acid potential of gastric juice. This test method is similar to the extraction method in Specification F 963, except that it requires conducting extraction steps at body temperature instead of at room temperature. The extraction procedure specified in this test method is more rigorous than that noted in Specification F 963 because the procedure causes the extraction of a larger quantity of metal.1.2 This test method is adapted from the European Toy Safety Standard, EN 71-3:1994 but differs from it in that a solvent extraction step is not required for processing waxes or oil-based products and no specific acceptable metal levels are specified.1.3 The rational for this test method is discussed in .1.4 This test method should be used on the art material as a whole and not an art material ingredient. Testing the art material as whole would be expected to give a more accurate estimate of soluble metal than from an extrapolation from testing ingredients.1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determining Extractability of Metals from Art Materials

DB53/T 102-2002 翡翠饰品分级

本标准规定了翡翠饰品（包括镶嵌及镶嵌的翡翠饰品）的质量分级原则。本标准适用于云南省行政辖区内对翡翠饰品进行质量检验，价值评估，商业贸易，资本金抵押，典当，拍卖等可参照执行。本标准不适用于经人工“处理”的翡翠饰品分级，也不适用于翡翠原材料和未经抛光的翡翠饰品。

Grading of Jadeite Jewelry

JIS Z 8123:1995 图形艺术.术语汇编.基本术语

この規格は，印刷に関する基礎的な用語及ぴ定義について規定する。

Graphic arts -- Glossary -- Fundamental terms

GSA AA-V-200 A-1965 软百叶帘 [代替: GSA AA-V-00200 B]

This specification covers one type of venetian blind.

VENETIAN BLINDS [Use In Lieu Of: GSA AA-V-00200 B]