Y91 造纸机械与设备 标准查询与下载

ASME 2250-2001 瓦楞纸造纸机械用锻造耳轴.第VIII节,第1部分.已作废

Forged Trunnions for Corrugating Paper Machinery Section VIII, Division 1 ANNULLED

Forged Trunnions for Corrugating Paper Machinery Section VIII, Division 1 ANNULLED

ASME 2246-2001 瓦楞纸造纸机械用锻造辊筒.第VIII节,第1部分.已作废

Forged Rolls for Corrugating Paper Machinery Section VIII, Division 1 ANNULLED

Forged Rolls for Corrugating Paper Machinery Section VIII, Division 1 ANNULLED

ASME 2283-2001 瓦楞纸造纸机械用锻造辊筒的尺寸限值.第VIII节,第1部分.已作废

Size Limits for Forged Rolls for Corrugating Paper Machinery Section VIII, Division 1 ANNULLED

Size Limits for Forged Rolls for Corrugating Paper Machinery Section VIII, Division 1 ANNULLED

QB/T 1447.1-2000 单面瓦楞纸板机 瓦楞辊

本标准规定了单面瓦楞纸板机瓦楞辊(以下简称“瓦楞辊”)的定义、产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存等要求。 本标准适用于蒸汽加热的工作压力0.1MPa~1.5MPa，最高工作温度不大于200℃的单面瓦楞纸板机的瓦楞辊。电加热和煤气加热的瓦楞辊，亦可参照执行。

Single face corrugated cardboard machine corrugating roll

QB/T 2498-2000 瓦楞纸板生产线

本标准规定了瓦楞纸板生产线的产品分类、技术要求、试验方法、安装验收规则和标志、包装等要求。 本标准适用于最高速度250m/min以下和幅宽不大于3000mm的瓦楞纸板生产线。

Corrugated cardboard production line

QB/T 1447.2-2000 单面瓦楞纸板机 压紧辊

本标准规定了单面瓦楞纸板机压紧辊(以下简称压紧辊)的产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存等要求。 本标准适用于蒸汽加热的工作压力0.1 MPa~1.5MPa,最高工作温度不大于200℃的单面瓦楞纸板机的压紧辊。电加热和煤气加热的压紧辊，亦可参照执行。

Press roller for single face corrugated cardboard machine

BS EN 1034-1:2000+A1:2010 机械安全性.造纸和整饰机械的设计和建造用安全要求.通用要求

1.1 This standard applies to paper making and paper finishing machines. It contains definitions and requirements which apply to all paper making and paper finishing machines listed in annex A and shall be used in connection with the specific part applicable for the respective machine listed in annex A. Specific parts can contain additional requirements or deviations from !EN 1034-1" in which case the specific stipulations take precedence over the specification made in !EN 1034-1". The standard deals with the hazards listed in 4. 1.2 This standard does not apply to machines used in paper converting. See EN 1010-1 to EN 1010-5. 1.3 This standard applies to machines produced after............. (date of CEN approval).

Safety of machinery - Safety requirements for the design and construction of paper-making and finishing machines - Common requirements

BS EN 1034-1:2000 机械的安全性.造纸机和精整机的设计和结构安全性要求.通用要求

1 This standard applies to paper making and paper finishing machines. It contains definitions and requirements which apply to all paper making and paper finishing machines listed in annex A and shall be used in connection with the specific part applicable for the respective machine listed in annex A. Specific parts can contain additional requirements or deviations from prEN 1034-1 in which case the specific stipulations take precedence over the specification made in prEN 1034-1. The standard deals with the hazards listed in 4. 2 This standard does not apply to machines used in paper converting. See EN 1010-1 to EN 1010-5. 3 This standard applies to machines produced after 17 September 1999.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Common requirements

BS EN 1034-3:1999+A1:2009 机械安全性.造纸机械和精整机的设计和结构的安全性要求.络纱机、纵切机和绞合机

This European Standard applies to winders and slitters and plying machines and should be used together with !EN 1034-1:2000+A1:2010". It deals with the significant hazards listed in clause 4. Respective safety requirements and/or measures are specified in clause 5. The specifications made in this standard take precedence over any deviating specification made in !EN 1034-1:2000+A1:2010". This standard does not apply to machines used in paper converting. See prEN 1010-1 to prEN 1010-5. This standard applies to machines produced after 17.11.1999.

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Winders and slitters, plying machines

ASTM E875-00 造纸工业中含水基制品用作为防腐剂的真菌控制剂的效力的标准测试方法

1.1 This laboratory test method is used to determine the efficacy of a fungal control agent to prevent spoilage of in-process aqueous-based products used in the paper industry.1.2 For information on bacterial control agents, see Test Method E723.1.3 It is the responsibility of the investigator to determine whether good laboratory practices (GLP) are required and to follow them when appropriate (see 40 CFR, 160).1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.1.4 A knowledge of microbiological techniques is required for these procedures.

Standard Test Method for Efficacy of Fungal Control Agents as Preservatives for Aqueous-Based Products Used in the Paper Industry

ASTM E875-00(2005) 造纸工业中含水基制品用作为防腐剂的真菌控制剂的效力的标准测试方法

This test method should be used to determine if a fungal control agent is effective to preserve pigment suspensions, dye solutions, pulp slurries, starch solutions, polymers, sizing agents, latex emulsions, and other specific aqueous-based materials used in the paper industry. Separate evaluations should be made on a representative type for each specific class of product to be preserved. Note 18212;Control of bacterial spoilage of similar products can be evaluated by Test Method E 723. Note 28212;Slimicides for control of fungal or bacterial slime can be evaluated by Test Methods E 599 and E 600.1.1 This laboratory test method is used to determine the efficacy of a fungal control agent to prevent spoilage of in-process aqueous-based products used in the paper industry.1.2 For information on bacterial control agents, see Test Method E 723.1.3 It is the responsibility of the investigator to determine whether good laboratory practices (GLP) are required and to follow them when appropriate (see 40 CFR, 160).1.4 A knowledge of microbiological techniques is required for these procedures.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Efficacy of Fungal Control Agents as Preservatives for Aqueous-Based Products Used in the Paper Industry

QB/T 1426-1999 造纸机械 盘纸分切机

本标准规定了盘纸分切机的产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存等要求。 本标准适用于将卷筒纸分切复卷的ZWQ型盘纸分切机。

Paper Machinery Coil Paper Slitting Machine

QB/T 1419-1999 造纸机械 纤维分离机

Paper machinery fiber separator

QB/T 1427-1999 造纸机械 切纸机

本标准规定了切纸机的产品分类、技术要求、试验方法、检验规则、标志、包装、运输、贮存等要求。 本标准适用于将卷筒纸切成平张纸的ZWQ型单、双刀切纸机。

Paper Machinery Paper Cutter

QB/T 1340-1999 造纸机械 复卷机

本标准规定了复卷机的产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存等要求。 本标准适用于幅宽小于6m的表面卷取卷筒纸的复卷机。

Paper Machinery Rewinder

QB/T 2419-1998 刀辊切草机

本标准规定了刀辊切草机(以下简称“切草机”)的产品分类、技术要求、试验方法、检验规则及标志、包装、运输、贮存等. 本标准适用于制浆、造纸厂切断草类原料的ZCQ2~4型切草机。

Knife Roller Mower

QB/T 2420-1998 立式水力碎浆机

本标准规定了立式水力碎浆机(以下简称“碎浆机”)的产品分类、技术要求、试验方法、检验规则及标志、包装、运输、贮存等。 本 标 准 适用于ZDS23~2及ZDS23~29型碎浆机。

Vertical Hydropulper

QB/T 2418-1998 刀辊切竹机

本标准规定了刀辊切竹机(以下简称“切竹机”)的产品分类、技术要求、试验方法、检验规则及标志、包装、运输、贮存等。 本标准适用于制浆、造纸厂切断竹类原料的ZCQ22型切竹机。

Knife Roller Bamboo Cutting Machine

QB/T 1060-1998 柔软度测定仪

本标准规定了柔软度测定仪的产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于高、中档卫生纸及烟草薄片等材料进行柔软度试验的柔软度测定仪(以下简称“柔软度仪”)。柔软度仪使用中的周期技术状态检查亦应参照使用。

Softness Tester

QB/T 2386-1998 纸与纸板短距压缩试验仪

本标准规定了纸与纸板短距压缩试验仪产品技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于纸与纸板短距压缩试验仪(以下简称“短距压缩仪”)。短距压缩仪使用中的周期技术状态检验亦应参照使用。

Paper and board short distance compression tester