Z32 噪声、振动测试方法 标准查询与下载

DIN ISO 10816-6:2015 机械振动.在非旋转部件上的测量和评定机器振动.第6部分:额定功率在100kW以上的往复式机器(ISO 10816-6-1995+Amd.1-2015)

Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 6: Reciprocating machines with power ratings above 100 kW (ISO 10816-6:1995 + Amd.1:2015)

BS EN ISO 9295:2015 声学. 机械和设备发出高频声功率级的测定

Acoustics. Determination of high-frequency sound power levels emitted by machinery and equipment

BS EN ISO 20361:2015 液体泵和泵组件.噪音试验代码.精确性2级和3级

Liquid pumps and pump units. Noise test code. Grades 2 and 3 of accuracy

BS ISO 7626-2:2015 机械振动和冲击. 机械导纳的试验确定. 采用连接激振器的单点平动激励测量

Mechanical vibration and shock. Experimental determination of mechanical mobility. Measurements using single-point translation excitation with an attached vibration exciter

BS ISO 10816-21:2015 机械振动. 通过非旋转部件的测量评估机械振动. 带变速箱的水平轴风力涡轮机

Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Horizontal axis wind turbines with gearbox

ISO 9295:2015 声学. 机械和设备发出高频声功率级的测定

This International Standard specifies four methods for the determination of the sound power levels of high-frequency noise emitted by machinery and equipment in the frequency range covered by the octave band centred at 16 kHz, which includes frequencies between 11,2 kHz and 22,4 kHz. They are complementary to the methods described in ISO 3741 and ISO 3744. The first three methods are based on the reverberation test room technique. The fourth method makes use of a free field over a reflecting plane. The test conditions which prescribe the installation and operation of the equipment are those specified

Acoustics - Determination of high-frequency sound power levels emitted by machinery and equipment

DIN EN 1793-4:2015 道路交通噪声降低装置.声学性能测定的试验方法.第4部分:固有特征.声音衍射的现场测定值;德文版本EN 1793-4-2015

Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction; German version EN 1793-4:2015

ISO 7626-2:2015 机械振动与冲击.机械导纳的试验确定.第2部分:用激振器作单点平动激励测量

This part of ISO 7626 specifies procedures for measuring linear mechanical mobility and other frequencyresponse functions of structures, such as buildings, machines and vehicles, using a single-point translational vibration exciter attached to the structure under test for the duration of the measurement. It is applicable to measurements of mobility, accelerance, or dynamic compliance, either as a drivingpoint measurement or as a transfer measurement. It also applies to the determination of the arithmetic reciprocals of those ratios, such as free effective mass. Although excitation is applied at a single point, there is no limit on the number of points at which simultaneous measurements of the motion response may be made. Multiple-response measurements are required, for example, for modal analyses.

Mechanical vibration and shock - Experimental determination of mechanical mobility - Part 2: Measurements using single-point translation excitation with an attached vibration exciter

GOST R ISO 16032-2015 声学. 测量建筑物内服务设备声压级的工程方法

Acoustics. Measurement of sound pressure level from service equipment in buildings by engineering method

GOST R 56394-2015 铁路运输的噪声运行噪声图. 发展要求和方法

Noise Operative noise maps for railway transport. Requirements and methods of development

GOST 33555-2015 机动车辆. 车内噪声. 允许水平和试验方法

Motor vehicles. Internal noise. Permissible levels and methods of tests

GOST 33329-2015 铁路运输的声学障碍. 技术要求

Acoustical barriers for railway transport. Technical reguirements

GOST R 56771-2015 声学. 建筑物内供水设施噪声测量的实验室方法

Acoustics. Laboratory method of noise measurement from water supply installations inside buildings

GOST 33325-2015 噪音. 铁路运输释放的外部噪声的计算方法

Noise. Calculation methods for external noise emitted by railway transport

GOST R 56689-2015 声学. 气载声音隔音和冲击声隔音以及服务设备声音的现场测量. 测量方法

Acoustics. Field measurements of airborne and impact sound insulation and of service equipment sound. Survey method

GOST 33328-2015 铁路运输的声学障碍. 控制方法

Acoustical barriers for railway transport. Methods of control

GOST 33667-2015 机动车辆. 电池和起动器的线端. 技术要求和试验方法

Motor vehicles. Wire tips to the battery and the starter. Technical requirements and test methods

KS B ISO 20283-2:2014 机械振动.船上振动的测量.第2部分:机构振动的测量

Mechanical vibration — Measurement of vibration on ships — Part 2: Measurement of structural vibration

KS B ISO 7626-5:2014 振动和冲击.机械导纳的试验测定.第5部分:使用与结构不连接的激发器用冲击激发法进行测量

Vibration and shock — Experimental determination of mechanical mobility — Part 5: Measurements using impact excitation with an exciter which is not attached to the structure

KS B ISO 7626-2:2014 振动与冲击.机械导纳的试验测定.第2部分:用激振器作单点平动激励测量

Vibration and shock — Experimental determination of mechanical mobility — Part 2: Measurements using single-point translation excitation with an attached vibration exciter