13.020.99;47.020.99 标准查询与下载

GB/T 37326-2019 船舶与海上技术 海上环境保护 船上垃圾的管理和处理

Ships and marine technology—Marine environment protection—Management and handling of shipboard garbage

GB/T 31971.3-2015 船舶与海上技术 海上环境保护:撇油器性能试验 第3部分:高粘度油

GB/T31971 的本部分规定了撤狂器在回收高站度油的情况下定量性能数据的确定方法,以便用户客观判断.比较和评价不同类型撒油器的设计与性能。 本部分规定的方法适用于在水槽中进行且需要控制油和泽油的特性的试验。 本部分适用于斥寸在试验水槽范围内的所有类型的撒铀器。 本部分规定的试验程序在规定控制条件下为被测试装置提供了全面的测试结果,可适用于一种或多种高粘度油。 对于专用的/艇人式系统,本部分规定的试验程序仅适用于符合测试条件的搬油设备,而不适用于整个搬油系统。

Ships and marine technology.Marine environment protection: performance testing of oil skimmers.Part 3:High viscosity oil

GB/T 31971.1-2015 船舶与海上技术 海上环境保护:撇油器性能试验 第1部分:动态水条件

GB/T31971 本部分规定了搬油器在动态水条件下定量确定性能数据的方法,以便最终用户能够客观评判.比较及评估不同种类抽油装置的设计及性能。 此方法适用于在水槽中的试验有规定了油的特性及浮油特性的控制要求。 本部分适用于设备斥十在试验水槽大小限定范围内的各类搬油器。 在被控条件下,这个试验过程为被试装置和一种或多种的油提供了全方位的试验结果。 注:当使用这些试验结果用于预测撤油器在实际工作条件下的性能时需谨慎。

Ships and marine technology.Marine environment protection: Performance testing of oil skimmers.Part 1: Moving water conditions

GB/T 31971.2-2015 船舶与海上技术 海上环境保护:撇油器性能试验 第2部分:静态水条件

GB/T 31971的本部分规定了撇油器在静态水条件下定量确定性能数据的方法，以便最终用户能够客观评判、比较及评估不同种类撇油装置的设计及性能。此方法适用于在水槽中的试验且规定了油的特性及浮油特性的控制要求。 本部分适用于设备尺寸在试验水槽大小限定范围内的各类撇油器。在被控条件下，这个试验过程为被试装置和一种或多种的油提供了全方位的试验结果。当使用这些试验结果用于预测撇油器在实际工作条件下的性能时需谨慎。 对于专用/嵌入式系统，本部分所描述的试验步骤仅适用于同类型的撇油设备，但不适用于整个撇油系统。

Ships and marine technology.Marine environmental protection:Performance testing of oil skimmers.Part 2: Static water conditions

ISO 17325-4:2018 船舶与海洋技术. 海洋环境保护. 围油栏. 第4部分: 辅助设备

This document specifies basic requirements for the design, layout and application of boom accessories, referred to as auxiliary equipment for the purpose of this document. This document does not purport to address all safety concerns, if any, associated with its use. However, it is the responsibility of the user of this document to establish the appropriate safety and health procedures, and to determine the applicability of regulatory limitations.

Ships and marine technology - Marine environment protection - Oil booms - Part 4: Auxiliary equipment

BS ISO 21070:2017 船舶和海洋技术.海洋环境保护.船上垃圾的管理和搬运

Ships and marine technology. Marine environment protection. Management and handling of shipboard garbage

ISO 13073-3:2016 船舶与海洋技术. 船舶防污系统的风险评定. 第3部分: 船舶应用和移动流程期间防污涂料使用杀生物活性物质的人类健康风险评定方法

Ships and marine technology - Risk assessment on anti-fouling systems on ships - Part 3: Human health risk assessment method of biocidally active substances used in anti-fouling paints on ships during the application and removal processes

JIS F 0600-2:2015 船舶和海洋技术. 船舶防污系统的风险评估. 第2部分: 使用生物活性物质的船舶防污系统

Ships and marine technology -- Risk assessment on anti-fouling systems on ships -- Part 2: Marine environmental risk assessment method for anti-fouling systems on ships using biocidally active substances

JIS F 0600-1:2015 船舶和海洋技术. 船舶防污系统的风险评估. 第1部分: 用于船舶防污系统的生物活性物质的海洋环境风险评估方法

Ships and marine technology -- Risk assessment on anti-fouling systems on ships -- Part 1: Marine environmental risk assessment method of biocidally active substances used for anti-fouling systems on ships

BS ISO 17325-2:2014 船舶和海洋技术. 海洋环境保护. 围油栏. 强度和性能要求

Ships and marine technology. Marine environment protection. Oil booms. Strength and performance requirements

ISO 18611-3:2014 船舶和海洋技术. 海洋用NOx还原剂AUS 40. 第3部分: 搬运, 运输和储存

This part of ISO 18611 describes best practice recommendations and requirements for handling, transportation, and storage of NOx reduction agent AUS 40 (aqueous urea solution), specified in of AUS 40 from any point of production to the point where it is filled into the on-board tank of the vehicle, in order to ensure the proper function of the selective catalytic reduction (SCR) converter systems. This International Standard is covering quality requirements and guidelines for AUS 40 for marine applications, irrespective of manufacturing method or technique.

Ships and marine technology - Marine NOx reduction agent AUS 40 - Part 3: Handling, transportation and storage

ISO 18611-2:2014 船舶和海洋技术. 海洋用NOx还原剂AUS 40. 第2部分: 试验方法

This part of ISO 18611 specifies test methods required for the determination of the quality characteristics of the NOx reduction agent AUS 40 (aqueous urea solution) specified in ISO 18611-1. In the remaining parts of ISO 18611, the term “NOx reduction agent AUS 40” will be abbreviated to “AUS 40”. This International Standard is covering quality requirements and guidelines for AUS 40 for marine applications, irrespective of manufacturing method or technique.

Ships and marine technology - Marine NOx reduction agent AUS 40 - Part 2: Test methods

ISO 18611-1:2014 船舶和海洋技术. 海洋用NOx还原剂AUS 40. 第1部分: 质量要求

This part of ISO 18611 specifies the quality characteristics of the marine NOx reduction agent, aqueous urea solution at 40 % concentration (AUS 40), which is needed to operate so-called SCR (selective catalytic reduction) converters. In marine applications, for example, for engine exhaust gas treatment, SCR converters are particularly suitable for selectively reducing the nitrogen oxide (NOx) emissions of internal combustion engines and boilers. This International Standard is covering quality requirements and guidelines for AUS 40 for marine applications, irrespective of manufacturing method or technique. In the remaining parts of ISO 18611, the term “NOx reduction agent” will be abbreviated to “AUS 40”.

Ships and marine technology - Marine NOx reduction agent AUS 40 - Part 1: Quality requirements

ISO 17325-2:2014 船舶和海洋技术. 海洋环境保护. 围油栏. 第2部分: 强度和性能要求

Ships and marine technology - Marine environment protection - Oil booms - Part 2: Strength and performance requirements

BS ISO 18611-3:2014 船舶和海洋技术. 海洋用NOx还原剂AUS 40. 装卸, 运输和储存

Ships and marine technology. Marine NOx reduction agent AUS 40. Handling, transportation and storage

BS ISO 18611-1:2014 船舶和海洋技术. 海洋用NOx还原剂AUS 40. 质量要求

Ships and marine technology. Marine NOx reduction agent AUS 40. Quality requirements

BS ISO 18611-2:2014 船舶和海洋技术. 海洋用NOx还原剂AUS 40. 试验方法

Ships and marine technology. Marine NOx reduction agent AUS 40. Test methods

BS ISO 17325-1:2014 船舶和海洋技术. 海洋环境保护. 围油栏. 设计要求

Ships and marine technology. Marine environment protection. Oil booms. Design requirements

ISO 17325-1:2014 船舶与海洋技术. 海洋环境保护. 围油栏. 第1部分: 设计要求

This part of ISO 17325 specifies the basic design requirements, general function, designations and marking of oil booms. It further specifies minimum information regarding design, dimensions and materials of oil booms to be provided by the manufacturer. The intent of this International Standard is to assist manufacturers and facilitate user selection of booms by technical criteria. It does not purport to address all aspects of booms or safety concerns associated with boom use, nor does it define boom operational procedures. It is the responsibility of the user of this International Standard to establish the appropriate safety and health practices, and determine applicability of regulatory limitations.

Ships and marine technology - Marine environment protection - Oil booms - Part 1: Design requirements

KS V ISO 21070:2013 海洋环境保护.船上废弃物的管理及处理

MARPOL 부속서 V의 요건은 선박에 적용하는 폐기물 관리를 위한 최소 기준이다. MARPOL 부속서V의 요건을 초과하는 국가 및 지역 규정 또한 준수할 필요가 있다. 이 표준은 선상에 있는 기간 동안 선상에서 발생되는 폐기물의 관리 및 취급에 대하여 적용한다. 이 표준에서 폐기물의 정의는MARPOL 부속서 V에서 정의된 것과 같다. 이 표준은 취급, 수집, 분리, 표시, 처리 및 저장을 포함하여, 폐기물의 선상 관리를 위한 절차를 포함한다. 또한, 여기에는 선박과 육상의 연동(interface) 및선박으로부터 항만수용시설로의 운반에 대하여 기술한다.

Ships and marine technology-Marine environment protection-Management and handling of shipboard garbage