13.040.20;43.020 标准查询与下载

BS ISO 12219-7:2017 道路车辆内的空气. 通过嗅觉测量的道路车辆车内空气和内饰组件试验室空气嗅觉测定

Interior air of road vehicles. Odour determination in interior air of road vehicles and test chamber air of trim components by olfactory measurements

BS ISO 12219-6:2017 道路车辆内的空气. 车内零件和材料在高温下半挥发性有机化合物排放的测定方法. 小室法

Interior air of road vehicles. Method for the determination of the emissions of semi-volatile organic compounds from vehicle interior parts and materials at higher temperature. Small chamber method

ISO 12219-6:2017 道路车辆内的空气. 第6部分: 测定车内零件和材料在高温下半挥发性有机化合物排放的方法. 小室法

Interior air of road vehicles - Part 6: Method for the determination of the emissions of semi-volatile organic compounds from vehicle interior parts and materials at higher temperature - Small chamber method

ISO 12219-7:2017 道路车辆内的空气. 第7部分: 通过嗅觉测量的道路车辆车内空气和内饰组件试验室空气嗅觉测定

Interior air of road vehicles - Part 7: Odour determination in interior air of road vehicles and test chamber air of trim components by olfactory measurements

GOST R ISO 12219-4-2015 道路车辆内的空气. 第4部分. 车内零件和材料使用挥发性有机化合物排放的测定方法. 小室法

Interior air of road vehicles. Part 4. Method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials. Small chamber method

DIN ISO 12219-5:2014 道路车辆内的空气. 第5部分: 测定车内零件和材料使用挥发性有机化合物排放的筛选方法. 静态室法 (ISO 12219-5-2014)

Interior air of road vehicles - Part 5: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Static chamber method (ISO 12219-5:2014)

BS ISO 12219-5:2014 道路车辆内的空气. 测定车内零件和材料使用挥发性有机化合物排放的筛选方法. 静态室法

Interior air of road vehicles. Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials. Static chamber method

ISO 12219-5:2014 道路车辆内的空气. 第5部分: 测定车内零件和材料使用挥发性有机化合物排放的筛选方法. 静态室法

This part of ISO 12219 specifies a chamber based, static headspace type method for measuring volatile organic compounds (VOCs), formaldehyde and other carbonyl compounds which may diffuse from vehicle interior unit components into the cabin air. The chamber emission test is intended to provide characteristic emission of unit component to car interior of assembly level emission. It also specifies the emission test chamber, preparation of the test specimen, connection of the vapour sampling devices and test conditions. This method is valid for new car interior unit components intended for vehicles, and can also be used for car interior unit components disassembled from assembly of car interior trim or used cars. A set of multi-unit components could be applicable according to the test purpose. A dynamic mode operation of emission chamber could be applied if corroborative information of the unit component emission between this method and small chamber method (ISO 12219-4:2013) is desired. The specified analytical procedure for VOCs (ISO 16000-6) is valid for the determination of VOCs ranging in concentration from sub-µg/m3 to several mg/m3. The method is applicable to the measurement of non-polar and slightly polar VOCs ranging in volatility from n-C6 to n-C16. Some very volatile compounds (VVOC) and semi-volatile organic compounds (SVOC) can also be analysed (see informative Annex D of This part of ISO 12219 is complementary to existing standards and provides third party test laboratories and manufacturing industry with an approach for: — comparing emissions from various unit components (sub-assemblies) with VOC emissions from related complete assemblies measured in other tests, — evaluating and categorising specific unit components by their VOC emission data, — comparing and correlating emission from unit components with VOC emission data obtained in other tests for the various materials used to make the unit component, — evaluating prototype, “low-emission” unit components during development. NOTE 1 All volatile carbonyls except formaldehyde can be analysed by ISO 16000-6:2011 incorporating informative Annex D. NOTE 2 The dynamic mode operation is described in the informative Annex D of this part of ISO 12219.

Interior air of road vehicles - Part 5: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Static chamber method

GOST R ISO 12219-2-2014 道路车辆内的空气. 第2部分. 测定车内零件和材料使用挥发性有机化合物排放的筛选方法. 袋法

Interior air of road vehicles. Part 2. Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials. Bag method

GOST R ISO 12219-1-2014 道路车辆内的空气. 第1部分. 整车试验室. 车舱内挥发性有机化合物的测定规范和方法

Interior air of road vehicles. Part 1. Whole vehicle test chamber. Specification and method for the determination of volatile organic compounds in cabin interiors

GOST R ISO 12219-3-2014 道路车辆内空气. 第3部分. 测定车内零件和材料使用挥发性有机化合物排放的筛选方法. 微尺度室法

Interior air of road vehicles. Part 3. Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials. Micro-scale chamber method

KS I ISO 12219-2:2013 公路车辆内空气.第2部分:汽车内饰和材料散发挥发性有机化合物的测定筛选法.袋法

이 표준은 자동차 내장부품에서 자동차 실내공간으로 방출하는 휘발성 유기화합물(VOC), 폼알데하이드 및 기타 카보닐 화합물들을 측정하기 위한 샘플링백 시험법에 대하여 규정한다. 이 표준은 시트, 인스트루먼트 패널, 천장 등과 같은 새 자동차 내장부품과 소재들을 평가하고 스크린하는 데 그 목적이있다.이 표준은 샘플링백을 사용하여 VOC, 폼알데하이드 및 기타 카보닐 화합물들을 스크린하는 시험절차에 대해 규정하고 있다.이 표준은 기존 표준들을 보완한 것이며, 제3자 시험기관과 제조 업체의 비용 절감을 위하여 다음사항과 관련하여 접근하고자 한다.― 저방출 소재/제품 개발 시 시제품에 대한 평가 및 스크린― 색상이나 패턴이 다른 제품 간의 방출량 비교이 표준은 자동차 내장부품에서 확산되는 기체상 유기물질의 방출 시험에 사용하는 샘플링백에 대한모양, 구조, 성능, 평가에 대하여 규정한다.

Interior air of road vehicles ― Part 2: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials ― Bag method

KS I ISO 12219-3:2013 公路车辆内空气.第3部分:汽车内饰和材料的挥发性有机化合物排放的筛选法.微室法

이 표준은 마이크로챔버를 이용하여 실제 사용 조건하에서 자동차 내장재에서 방출되는 기체상 유기화합물(휘발성과 일부 반휘발성)을 빠르고, 정성적, 반정량적으로 측정하기 위한 스크리닝 시험방법에대해 규정한다. 이 표준은 주로 신차의 내장 구성부품들을 평가하는 방법이지만 기존 자동차 구성부품들에 대해서도 적용할 수 있다.대상 분석물질은 VOCs(일반적으로 휘발성 유기화합물의 범위는 n-hexane에서 n-hexadecane 사이의 유기화합물들로 정의됨.) 및 폼알데하이드와 같은 휘발성 카보닐 화합물들을 포함한다. VOCs에 대한 세부 분석절차는 KS I ISO 16000-6을 따르며, 폼알데하이드와 일부 기타 카보닐 화합물들은 KS IISO 16000-3을 따른다.이 표준은 기존 표준들을 보완하고 다음과 같이 제3자 시험기관과 제조 업체에 높은 비용 효율을 제공한다.― 일반적 품질관리 부분으로서 VOC 방출의 모니터링과 스크리닝― 정식 인증 시험 사이의 제품의 균질성과 적합성 모니터링― 다른 색상/패턴 등 다양한 제품의 방출량 비교― 저방출 소재/제품 개발 시 시제품에 대한 평가

Interior air of road vehicles ― Part 3: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials ― Micro-scale chamber method

KS I ISO 12219-4:2013 公路车辆内空气.第4部分:汽车内饰挥发性有机化合物排放的筛选法.小室法

이 표준은 소형 방출 시험 챔버(이하, 소형챔버)를 이용하여 실제 사용조건하에서 자동차 내장부품에서 방출되는 기체상 유기화합물(휘발성 및 일부 반휘발성)을 정성 및 정량적으로 측정하는 시험방법에 대해 규정한다. 소형챔버법은 차량의 오염물질 방출량을 측정할 수 있는 전달함수를 구하는 것이목적이다. 이 표준은 신차의 내장부품들을 평가하는 방법이지만 기존 자동차의 내장부품들에 대해서도 적용할 수 있다.대상화합물은 VOCs(일반적으로 VOCs의 범위는 n-헥산(hexane)에서 n-헥사데칸(hexadecane) 사이의 유기화합물들로 정의됨.) 및 폼알데하이드와 같은 휘발성 카보닐화합물을 포함한다. VOCs에 대한 세부분석절차는 KS I ISO 16000-6을 따르며, 폼알데하이드와 일부 기타 카보닐화합물들은 KS I ISO16000-3을 따른다.이 표준은 기존표준 ASTM D5116[1], VDA 276[2]을 보완하며, 제3자 시험기관과 제조업체에 다음과 같은 시험을 하는 데 사용할 수 있다.a) 내장부품 VOC 방출량 데이터가 실제 사용조건에서 미치는 영향b) VOC 방출량과 관련이 있는 다양한 내장부품의 방출량 비교c) VOC 방출량 데이터를 기준으로 특정 내장부품의 평가 및 분류d) 부품시험과 차량시험 사이의 상관관계 도출 및 검증을 위한 VOC 방출량 데이터 제공e) 저

Interior air of road vehicles ― Part 4: Method for the determination of the emissions of volatile compounds from vehicle interior parts and materials ― Small chamber method

DIN ISO 12219-4:2013 道路车辆内空气. 第4部分:来自车辆内装品和材料的挥发性有机化合物释放的测定方法. 小室法 (ISO 12219-4-2013)

Interior air of road vehicles - Part 4: Method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Small chamber method (ISO 12219-4:2013)

DIN ISO 12219-1:2013 道路车辆内的空气. 第1部分: 整车试验室. 测定车舱内挥发性有机化合物的规范和方法(ISO 12219-1-2012)

Interior air of road vehicles - Part 1: Whole vehicle test chamber - Specification and method for the determination of volatile organic compounds in cabin interiors (ISO 12219-1:2012)

DIN ISO 12219-3:2013 道路车辆内的空气. 第3部分: 测定车内零件和材料使用挥发性有机化合物排放的筛选方法. 微尺度室法(ISO 12219-3-2012)

Interior air of road vehicles - Part 3: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Micro-scale chamber method (ISO 12219-3:2012)

NF X43-408-4*NF ISO 12219-4:2013 道路车辆内空气 第4部分 来自车辆内装品和材料的挥发性有机化合物释放的测定方法 小室法

Interior air of road vehicles - Part 4: method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Small chamber method

ISO 12219-4:2013 道路车辆内空气 第4部分 来自车辆内装品和材料的挥发性有机化合物释放的测定方法 小室法

This part of ISO 12219 specifies a qualitative and quantitative analytical method for vapour-phase organic compounds (volatile and some semi-volatile] released from car trim materials under Simulated real use conditions using Small emission test chambers (Small chamben. Small chambers are intended to provide atransfer function to vehicle level emissions. This method is intended for evaluating new car interior trim components but can, in principle, be applied to used car components. Target compounds include VOCs (conventionally defined as organic compounds in the volatility range Ph-hexane to Ph-hexadecanej and volatile carbonyl compounds such as formaldehyde. The specified analytical procedure for VOCs is ISO 16000-6 and for formaldehyde and some other light carbonyl compounds is ISO 16000-3. NOTE Compounds more volatile than pn-hexane andless volatile than np-hexadecane can also be analysed [See This part ofISO 12219 is complementarytoASTM D5116因andVDA 276,轩and providesthird partytest lapbporatories and manufacturing industry with an approach for: al identifyingthe effect ofreal use conditions on Specific VOC emissions datai D) comparing emissions from various assemblies with regards to specificVOC emissions; cj] evaluating and Sorting Specific assemblies regarding SpecificVOC emissions data; dj providing specific VOC emissions data to develop and verify a _ correlation between material level methods and the vehicle level method; el evaluating prototype，“low-emission ”assemblies during development.

Interior air of road vehicles - Part 4: Method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Small chamber method

DIN ISO 12219-2:2012 公路车辆内空气.第2部分:汽车内饰和材料散发挥发性有机化合物的测定筛选法.袋式法(ISO 12219-2-2012)

Interior air of road vehicles - Part 2: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Bag method (ISO 12219-2:2012)