13.060.20;67.250 标准查询与下载
共找到 35 条与 相关的标准，共 3 页
Influence of organic materials on water intended for human consumption - Determination of odour and flavour assessment of water in piping systems; German version EN 1420:2016
- ICS
- 13.060.20;67.250
- CCS
- C51
- 发布
- 2016-05
- 实施
Influence of organic materials on water intended for human consumption. Determination of odour and flavor assessment of water in piping systems
- ICS
- 13.060.20;67.250
- CCS
- C51
- 发布
- 2016-02-29
- 实施
- 2016-02-29
This European Standard specifies a procedure for obtaining a migration water to determine odour and flavour for products made from organic materials intended to come in contact with water for human consumption (drinking water) and used in piping systems. Such products include pipes, fittings, ancillaries and coatings. This standard is applicable to products to be used under various conditions for the transport, storage and distribution of water intended for human consumption and raw water used for the manufacture of water intended for human consumption. This standard specifies a test method comprising of a set of procedures. The use may be dependent on the relevant national regulations and/or the system or product standards.
Influence of organic materials on water intended for human consumption - Determination of odour and flavour assessment of water in piping systems
- ICS
- 13.060.20;67.250
- CCS
- G15
- 发布
- 2016-01
- 实施
Influence of organic materials on water intended for human consumption - Determination of the chlorine demand - Test method; German version EN 14718:2014
- ICS
- 13.060.20;67.250
- CCS
- C53
- 发布
- 2015-03
- 实施
This European Standard specifies a method for determining the chlorine demand of organic materials intended for use in contact with drinking water. This European Standard is applicable to factory made and site applied products used for the distribution, transport and storage of drinking water. This European Standard does not cover the use of high levels of chlorine to disinfect products when they are put into service.
Influence of organic materials on water intended for human consumption - Determination of the chlorine demand - Test method
- ICS
- 13.060.20;67.250
- CCS
- Z50
- 发布
- 2014-12
- 实施
Influence of materials on water intended for human consumption - Influence due to migration - Part 1: Test method for factory-made products made from or incorporating organic or glassy (porcelain/vitreous/enamel) materials; German version EN 12873-1:2014
- ICS
- 13.060.20;67.250
- CCS
- P41
- 发布
- 2014-09
- 实施
Influence of materials on water intended for human consumption. Influence due to migration. Test method for factory-made products made from or incorporating organic or glassy (porcelain/vitreous enamel) materials
- ICS
- 13.060.20;67.250
- CCS
- C53;X08
- 发布
- 2014-07-31
- 实施
- 2014-07-31
This European Standard specifies a procedure to determine the migration of substances from factory-made or factory-applied products for use in contact with water intended for human consumption. Materials used to make such products include plastics, rubber and glassy (porcelain/vitreous enamel) materials. This European Standard is applicable to products intended to be used under various conditions for the transport and storage of water intended for human consumption, including raw water used for the production of water intended for human consumption. It covers the extraction by water of substances from the finished products.
Influence of materials on water intended for human consumption - Influence due to migration - Part 1: Test method for factorymade products made from or incorporating organic or glassy (porcelain/vitreous enamel) materials
- ICS
- 13.060.20;67.250
- CCS
- X00
- 发布
- 2014-07
- 实施
This European Standard specifies a test method for the laboratory assessment of the potential cytotoxic effect of paper and board materials.This test method is intended to assess wet contact with food simulant.
Paper and board - Determination of the cytotoxicity of aqueous extracts
- ICS
- 13.060.20;67.250
- CCS
- 发布
- 2010-01-01
- 实施
This European Standard specifies a method to determine the migration of substances from factory made cementitious products into test waters after contact with the products. This European Standard is applicable to factory made cementitious products, e.g. cement mortar linings to metallic pipes, tanks, concrete pipes etc., intended to be used for the transport and storage of water intended for human consumption, including raw water used for the production of drinking water.
Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementitious products; German version EN 14944-3:2007
- ICS
- 13.060.20;67.250
- CCS
- Q11
- 发布
- 2009-01
- 实施
Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Part 1 : design and operation.
- ICS
- 13.060.20;67.250
- CCS
- Z16
- 发布
- 2008-06-01
- 实施
- 2008-06-21
This European Standard specifies a method to determine the migration of substances from factory made cementitious products into test waters after contact with the products. This European Standard is applicable to factory made cementitious products, e.g. cement mortar linings to metallic pipes, tanks, concrete pipes etc., intended to be used for the transport and storage of water intended for human consumption, including raw water used for the production of drinking water.
Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementitious products; German version EN 14944-3:2007
- ICS
- 13.060.20;67.250
- CCS
- P42;C53
- 发布
- 2008-05
- 实施
This European Standard specifies a procedure to determine the release of metals from metallic materials used in construction products intended to come into contact with drinking water1. The test can be used for three purposes: a) Assess a material as a reference material for a category of materials using the results of several investigations in different waters covering a broad range of water compositions. b) Assess a material for approval by way of comparative testing. c) Obtain data on the interaction of local water with a material.
Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Design and operation
- ICS
- 13.060.20;67.250
- CCS
- C51;Z16
- 发布
- 2008-02-29
- 实施
- 2008-02-29
The standard describes a method for the determination of the influence of factory made cementious products on the organoleptic characteristics of drinking water as odour, flavour, colour and turbidity. A test method for the production of a migration water is described and a reference to the standards for the determination of the organoleptic parameters is given. The standard serves the installation of a european system for the certification and application of products in contact with water intended for human consumption (EAS).
Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of factory made cementitious products on organoleptic parameters English version of DIN EN 14944-1:2006-07
- ICS
- 13.060.20;67.250
- CCS
- P42;C53
- 发布
- 2006-07
- 实施
Influence of materials on water intended for human consumption - Influence due to migration - Part 4 : test method for water treatment membranes.
- ICS
- 13.060.20;67.250
- CCS
- Q81
- 发布
- 2006-06-01
- 实施
- 2006-06-05
Influence of materials on water intended for human consumption - Influence due to migration - Part 3 : test method for ion exchange and adsorbent resins.
- ICS
- 13.060.20;67.250
- CCS
- Q81
- 发布
- 2006-06-01
- 实施
- 2006-06-05
The document describes a method for the determination of the migration of substances from ion exchangers and adsorbance resins into drinking water. The materials are used for a purposeful change of the water quality and they in a steady contact with the water during the water treatment. The methods for sampling, pre-treatment of samples, test procedure and calculation of results are given.
Influence of materials on water intended for human consumption - Influence due to migration - Part 3: Test method for ion exchange and adsorbent resins English version of DIN EN 12873-3:2006-06
- ICS
- 13.060.20;67.250
- CCS
- P41;C53
- 发布
- 2006-06
- 实施
The document describes a test method for the determination of the influence of membrane filters on the drinking water quality. Samples from the material are brought into contact with test water following a special procedure and then the relevant chemical-physical parameters will be analyzed. The standard will be part of major regulation about the european acceptance of products in contact with water for human consumption (EAS).
Influence of materials on water intended for human consumption - Influence due to migration - Part 4: Test method for water treatment membranes English version of DIN EN 12873-4:2006-06
- ICS
- 13.060.20;67.250
- CCS
- C53;P42
- 发布
- 2006-06
- 实施
This European standard describes a test method for laboratory evaluation of possible adverse effects of water treatment membranes on drinking water quality. In principle it is applicable to microfiltration, ultrafiltration, nanofiltration, reverse osmosis and electrodialysis modules for use in the treatment of public water supplies and of water inside buildings. NOTE Such devices can vary considerably in design and operation and hence some modification of the procedures may be required. Evaluation of the efficiency of the membrane filter in removing contaminants from the treated water is not included.
Influence of materials on water intended for human consumption - Influence due to migration - Test method for water treatment membranes
- ICS
- 13.060.20;67.250
- CCS
- Q81
- 发布
- 2006-05-31
- 实施
- 2006-05-31
This European Standard specifies a method to determine the influence of factory made cementitious products on the odour, flavour, colour and turbidity of test waters after contact with the products. This European Standard is applicable to factory made cementitious products, e.g. cement mortar linings to metallic pipes, tanks, concrete pipes etc. intended to be used for the transport and storage of water for human consumption, including raw water used for the production of drinking water.
Influence of cementitious products on water intended for human consumption - Test methods - Influence of factory made cementitious products on organoleptic parameters
- ICS
- 13.060.20;67.250
- CCS
- Q11
- 发布
- 2006-04-28
- 实施
- 2006-04-28
