29.020;31.020 标准查询与下载

DIN EN 62321-7-2:2017 电工技术产品中某些物质的测定.第7-2部分:六价铬.采用比色法测定电子聚合物中的六价铬(Cr(VI))(IEC 62321-7-2-2017);德文版本EN 62321-7-2-2017

This method describes procedures to measure hexavalent chromium, Cr(VI), quantitatively in samples of polymers and electronics.

Determination of certain substances in electrotechnical products - Part 7-2: Hexavalent chromium - Determination of hexavalent chromium (Cr(VI)) in polymers and electronics by the colorimetric method (IEC 62321-7-2:2017); German version EN 62321-7-2:2017

DIN IEC/PAS 62814:2014 包含可复用组件的软件产品可靠性.功能和测试导则(IEC/PAS 62814-2012)

Dependability of software products containing reusable components - Guidance for functionality and tests (IEC/PAS 62814:2012)

DS-håndbog 174:2013 RoHS——简介 生产、进口或销售电气和电子设备的贸易商指南

RoHS – an introduction

LST EN 50581-2012 评估电子电气产品有害物质限制的技术文件

Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances

DS/IEC/TR 62635:2012 制造商和回收商提供的报废信息指南以及电气和电子设备的可回收率计算指南

This Technical Report (TR) provides a methodology for information exchange involving EEE manufacturers and recyclers, and for calculating the recyclability and recoverability rates to:• provide information to recyclers to enable appropriate and optimized

Guidelines for end-of-life information provided by manufacturers and recyclers and for recyclability rate calculation of electrical and electronic equipment

DS/EN 50581:2012 评估电子电气产品有害物质限制的技术文件

This European Standard specifies the technical documentation that the manufacturerneeds to compile in order to declare compliance with the applicable substancerestrictions.The documentation of the manufacturer’s management system is outside the scope ofth

Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances

DS/EN 62474:2012 电工行业产品的材料声明

IEC 62474:2012 specifies the procedure, content, and form relating to material declarations for products of companies operating in and supplying the electrotechnical industry. Process chemicals and emissions during product use are not in the scope of this

Material declaration for products of and for the electrotechnical industry

QC 080000-2012 IEC电子元器件质量评定体系 (IECQ体系). 有害物质过程管理体系要求 (HSPM)

IEC Quality Assessment System for Electronic Components (IECQ System) - Hazardous Substance Process Management System Requirements (HSPM)

ANSI/UL 6420-2012 用于系统绝缘和作为单一机组设备的安全性标准

Standard for Safety for Equipment Used for System Isolation and Rated as a Single Unit

ANSI/EIA 364-1005:2011 确定摩擦腐蚀接触面敏感性的环境试验方法

This standard describes recommended test sequences to determine the susceptibility of contacts to fretting corrosion that is a major and significant failure mechanism that can be caused by vibration and thermal cycling.

Environmental Test Methodology for Determining the Susceptability of Contacts to Fretting Corrosion

DS/IEC/TR 62476:2010 关于电气和电子产品中物质使用限制的产品评估指南

This Technical Report provides a framework for the use of internationally accepted standards, tools, and practices to evaluate electrical and electronic products with respect to restricted substances.This Technical Report can also be applied to declarable substances which are not restricted in electrical and electronic products.This Technical Report provides guidance on how technical documentation and relevant evaluation and control methods should be selected and applied for restricted or declarable substances of any producer’s product.The document is not intended for setting a new management scheme or for certification purposes. Evaluation and control meth

Guidance for evaluation of product with respect to substance-use restrictions in electrical and electronic products

ANSI/NEMA 62430-2010 电气和电子产品用环境意识设计

This Environmentally Conscious Design for Electrical and Electronic Products standard specifies requirements and procedures to integrate environmental aspects into design and development processes of electrical and electronic products, including combination of products, and the materials and components of which they are composed. The existence of this standard does not preclude particular sectors from generating their own, more specific, standards or guidelines.

ENVIRONMENTAL CONSCIOUS DESIGN FOR ELECTRICAL AND ELECTRONIC PRODUCTS

DS/EN 62430:2009 电气和电子产品的环保设计

This International Standard specifies requirements and procedures to integrate environmental aspects into design and development processes of electrical and electronic products, including combination of products, and the materials and components of which they are composed (hereafter referred to as products).NOTE The existence of this standard does not preclude particular sectors from generating their own, more specific, standards or guidelines. Where such documents are produced it is recommended that they use this document as the reference in order to ensure consistency throughout the electrotechnical sector.

Environmentally conscious design for electrical and electronic products

DS/IEC/PAS 62596:2009 电工产品 受限物质的测定 取样程序 指南

This PAS provides general sampling guidelines and strategies of sampling for electrotechnical products, electronic assemblies, electronic components. In order to obtain samples that can be used for analytical testing to determine the levels of restricted substances as described in the test methods of IEC 62321. Restrictions for substances will vary between geographic regions and from time to time. This PAS describes a generic process for the sampling of any substance which could be restricted.This PAS does not provide:• Full guidance on each and every product that could be classified as electrotechnical equipment. Since there is a huge variety of electrotec

Electrotechnical products - Determination of restricted substances - Sampling procedure - Guidelines

IEC 60204-1:2009 机械安全性.机械的电气设备.第1部分:一般要求

Safety of machinery - Electrical equipment of machines - Part 1: General requirements

BS EN 61193-2:2007 质量评估体系.第2部分:电子元件和包装件的检验用抽样策略的选择和使用

This part of IEC 61193 applies to the inspection of electronic components, packages, and also modules (referred to as “products” in this standard) for use in electronic and electric equipment. It specifies sampling plans for inspection by attributes on the assumption that the acceptance number is zero (Ac = 0), including criteria for sample selection and procedures. The zero acceptance number sampling plans provided by this standard apply to the inspection of products, that are manufactured under suitable process control with the target of a “zerodefect” quality level before sampling inspection. In addition, this standard provides a method for the calculation of the expected value of the statistical verified quality limit (SVQL) at a confidence level of 60 %. Amongst other things, this method can be used to verify the effectiveness of the supplier’s process control. NOTE In this standard the term “module” is used for products which are modules according to the definition in IEC 60194.

Quality assessment systems - Selection and use of sampling plans for inspection of electronic components and packages

DIN EN 61163-1:2007 可靠性应力筛分.第1部分:批制造的可修复组件

Reliability stress screening - Part 1: Repairable assemblies manufactured in lots (IEC 61163-1:2006); German version EN 61163-1:2006

DS/CLC/TR 50489:2007 智能跟踪器芯片 将 RFID 纳入电气和电子设备以进行 WEEE 管理的可行性研究

This Technical Report investigates in the light of the implementation of the WEEE Directive(2002/96/EC) the feasibility of deploying machine readable product identification technologies(e.g. smart tracker chips) to fulfil the marking requirement for the purpose of implementingproducer responsibility. The product recognition shall provide information for waste streammanagement (sorting, reporting and cost allocation).Machine readable product identification technologies can be utilized during every phase of theproduct life cycle of an EEE. The WEEE management is the last phase. This Technical Reportfocuses on this phase only.

Smart tracker chips - Feasibility study on the inclusion of RFID in Electrical and Electronic Equipment for WEEE management

GOST R IEC 60204-1-2007 机械安全性.设备和机械的电器装置.第1部分:一般要求

Safety of machinery. Electrical equipment of machines and mechanisms. Part 1. General requirements

DS/IECQ 080000 (IECQ HSPM):2006 IEC 电子元器件质量评估体系（IECQ） 电气和电子元器件及产品有害物质过程管理体系要求（HSPM）

This Specification defines the requirements for establishing processes to identify and control theintroduction of hazardous substances (HS) into its products. In the event that hazardous substancesare introduced into the products, this Specification defines the requirements for implementingprocesses to test, analyze, or otherwise ascertain the HS content, and to make it available to thecustomer. Documented processes shall be within the organization’s business and quality managementsystems.The requirements of this Specification are in addition to those contained within ISO 9001.

IEC Quality Assessment System for Electronic Components (IECQ) - Electrical and Electronic Components and Products Harzardous Substance Process Management System Requirements (HSPM)