49 航空器和航天器工程 标准查询与下载

NAVY QPL-85052-9 NOTICE 1-2007 有垫层环状夹一般规定

The preparing activity above was responsible for this document as of the date shown above. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil.

CLAMP, LOOP, CUSHION, GENERAL SPECIFICATION FOR

NAVY A-A-59734 VALID NOTICE 1-2007 振动筘转速表

A-A-59734, dated 09 August 2002, has been reviewed and determined to be valid for use in acquisition.

TACHOMETER, VIBRATING REED

MH/T 2005.1-2007 飞行品质监控项目规范 第1部分:空客系列飞机

MH/T 2005的本部分规定了空客A300-600 、A310 、A319 、A320 、A321 、A330和A340系列飞机各飞行阶段的飞行品质监控项目规范。 本部分适用于空客A300-600 、A310 、A319 、A320 、A321 、A330和A340系列飞机。

Flight operational quality assurance events and deviation limits Part 1: Airbus series

NAVY MIL-PRF-30099-2006 船表层黑水和结合的黑水可再利用废水处理系统

This specification covers a fully automated, self-contained treatment system that provides treatment of either blackwater (see 6.4.2) or combined blackwater and graywater (see 6.4.13) found onboard Naval surface ships equipped with blackwater vacuum collection

TREATMENT SYSTEM, BLACKWATER AND COMBINED BLACKWATER/GRAYWATER, FOR SURFACE SHIPS

NAVY QPL-85052-9-2006 有垫层环状夹一般规定

QUALIFIED PRODUCTS LISTOF PRODUCTS QUALIFIED UNDER DETAIL SPECIFICATION MIL-DTL-85052

CLAMP, LOOP, CUSHION, GENERAL SPECIFICATION FOR

NAVY MIL-STD-3001-7 VALID NOTICE 1-2006 第7,8部分多输出演示数字化技术资料的定期维修的规定的技术手册

MIL-STD-3001-7, dated 15 May 2001, has been reviewed and determined to be valid for use in acquisition.

DIGITAL TECHNICAL INFORMATION FOR MULTI-OUTPUT PRESENTATION OF TECHNICAL MANUALS PERIODIC MAINTENANCE REQUIREMENTS (PART 7 OF 8 PARTS)

QJ 1931.7A-2005 电气简图绘制规则 第7部分：总布置图

本部分规定了航天产品电气简图中总布置图的绘制要求。 本部分适用于航天产品电气简图中总布置图的绘制。

The drawing rules of electrical diagrams--Part 7: General arrangement diagram

QJ 1931.3A-2005 电气简图绘制规则 第3部分：框图

本部分规定了航天产品电气简图中框图的绘制要求。 本部分适用于航天产品电气简图中框图的绘制。

The drawing rules of electrical diagrams--Part 3: Block diagram

QJ 1931.6A-2005 电气简图绘制规则 第6部分：线缆连接图

本部分规定了航天产品电气简图中线缆连接图的绘制要求。 本部分适用于航天产品电气简图中线缆连接图的绘制。

The drawing rules of electrical diagrams--Part 6: Cable connection diagram

QJ 1931.1A-2005 电气简图绘制规则 第1部分：术语和分类

本部分规定了航天产品电气简图绘制的基本概念和电气简图的分类。 本部分适用于航天产品电气简图的绘制。

The drawing rules of electrical diagram--Part 1: Terms and classification

QJ 1931.5A-2005 电气简图绘制规则 第5部分：接线图

本部分规定了航天产品电气简图的接线图中单元接线图和互连接线图的绘制要求。 本部分适用于航天产品电气简图的接线图中单元接线图和互连接线图的绘制。

The drawing rules of electrical diagrams--Part 5: Connection diagram

QJ 1931.4A-2005 电气简图绘制规则 第4部分：电路图

本部分规定了航天产品电气简图中电路图的绘制要求。 本部分适用于航天产品电气简图中电路图的绘制。

The drawing rules of electrical diagrams--Part 4: Circuit diagram

QJ 1931.2A-2005 电气简图绘制规则 第2部分：一般规则

本部分规定了航天产品电气简图绘制的原则和一般规则。 本部分适用于航天产品电气简图的绘制。

The drawing rules of electrical diagram--Part 2: General rules

NAVY QPL-AS7928-2-2005 铜制卷曲式导体街头的终端接线片的一般规定

This list has been prepared for use by or for the Government in the acquisition of products covered by the subject non-Government standard and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest adopted issue of the applicable non- Government standard. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release the manufacturer from compliance with the non-Government standard equirements.

TERMINALS, LUG: SPLICES, CONDUCTOR: CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR

ARMY MIL-PRF-63017 C-2004 弹药装备和弹药的数据表要求的技术手册

This specification contains detailed requirements for the preparation of data sheet technical manuals for munition equipment and ammunition. No other types or classifications of technical manuals may be prepared using this specification.

MANUALS, TECHNICAL: REQUIREMENTS FOR MUNITION EQUIPMENT AND AMMUNITION DATA SHEETS

NAVY QPL-AS20708-1-2003 自动整角机的一般规定

This list has been prepared for use by or for the Government in the acquisition of products covered by the subject non-Government standard and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest adopted issue of the applicable non-Government standard. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release the manufacturer from compliance with the non- Government standard requirements.

SYNCHROS, GENERAL SPECIFICATION FOR [Superseded: NAVY QPL-20708 -14 CANC NOTICE 1, NAVY QPL-20708 -14 (1), NAVY QPL-20708 -14, NAVY QPL-20708 -13, NAVY QPL-20708 -12 (1), NAVY QPL-20708 -12, NAVY QPL-20708 -11 (1), NAVY QPL-20708 -11, NAVY QPL-2

ARMY TT-C-490 E-2002 铁表面的化学处理和预处理膜(有机敷层的基础) [替代:ARMY TT-C-00490 A]

This specification covers cleaning, surface conditioning for crystal refinement and pretreatment by chemical conversion of ferrous metals and zinc/zinc alloy coated metals. The application of chemical conversion and pretreatment coatings provides uniformly textured substrates for receiving and retaining paint, lacquer, etc. In addition, this specification covers suitable cleaning processes for nonferrous surfaces(see 6.1, 6.1.2).

CHEMICAL CONVERSION COATINGS AND PRETREATMENTS FOR FERROUS SURFACES (BASE FOR ORGANIC COATINGS) [Use In Lieu Of: ARMY TT-C-00490 A]

NAVY MIL-STD-3001-7-2000 第7,8部分多输出演示数字化技术资料的定期维修的规定的技术手册

This part of the standard establishes the technical content requirements for the preparation of periodic maintenance inspection requirements for aircraft weapon systems, quick engine change assemblies, powered aerial targets (missiles), support equipment, automatic test equipment, airborne armament equipment or special stores, powered surface targets, and aviation life support systems. This data can be used to develop periodic maintenance requirements card sets in a variety of output forms, including interactive screen presentations and printed maintenance work cards.

DIGITAL TECHNICAL INFORMATION FOR MULTI-OUTPUT PRESENTATION OF TECHNICAL MANUALS PERIODIC MAINTENANCE REQUIREMENTS (PART 7 OF 8 PARTS)

ARMY MIL-C-49514 VALID NOTICE 1-2000 通用规格压力仪表用于大炮和迫击炮的铜制球形

MIL-C-49514, dated 16 February 1993, has been reviewed and determined to be valid for use in acquistion.

COPPER CRUSHER SPHERES FOR CANNON AND MORTAR PRESSURE GAUGES, GENERAL SPECIFICATION FOR

ARMY MIL-DTL-13931 J-1999 大炮的一般规定

This specification supports the actheof: gun and howitzer cannon; mortar cannon, mounts, and baseplates; recoilless rifles and mounts; and related equipment. This specification includes the minimum essential Engineering and Packaging Requirements and the necessary Verifications to determine that these requirements have been met.

CANNON: GENERAL SPECIFICATION FOR