49.025 航空航天制造用材料 标准查询与下载

GB/T 42047-2022 载人航天器密封舱内材料和部组件出气产物测定方法

本文件规定了载人航天器密封舱内部材料和部组件出气产物的成分及浓度的测定方法。 本文件适用于载人航天器密封舱内材料和部组件的筛选测试。

Determination of offgassed products from materials and assembled articles in a pressurized cabin of manned spacecraft

GB/T 28876.2-2014 空间实验设备使用材料的可燃性 第2部分:测试方法

GB/T28876 的本部分规定了航夭器舱内有氧环境中实验设备使用材料的可燃性测试的仪器设备和样品要求、火焰向上传播试验、电线绝缘材料的可燃性试验、材料在气态氧中的向上可燃性试验、热和可见烟雾释放速率试验、构形可燃性试验、可燃极限试验、自燃温度试验、燃烧热试验、氧指数试验和着火机制试验的方法、可燃性评价准则和测试报告内容。 本部分适用于肮夭器舱内有氧环境中实验设备使用材料的可燃性测试和评价。 肮天器、相关的地面支持设备和专用测试设备使用材料的可燃性测试和评价可叁照使用。

Flammability of materials in space experimental facilities.Part 2:Test methods

GB/T 28876.1-2012 空间实验设备使用材料的可燃性.第1部分：要求

第1部分:要求GB/T28876 的本部分规定了航夭器舱内有氧环境中实验设备使用材料的可燃性评价和测试的要求、评价程序和材料选用原则。 本部分适用于航夭器舱内有氧环境中实验设备使用材料的评价和选用”航夭器、相关的地面支持设备和专用测试设备使用材料的可燃性评价和材料选用可参照使用。

Flammability of materials in space experimental facilities.Part 1:Requirements

HB 8420-2014 高温模具材料DM02合金锭规范

本规范规定了DM02合金锭的要求、质量保证规定和交货准备等。 本规范适用于真空感应炉熔炼的DM02合金锭(以下简称合金锭)。

Specification for DM02 master alloys for high temperature die material

NAVY QPL-24041-22 NOTICE 1-2007 化学固化聚氨酯模塑胶及灌封胶

QPL-24041-22, which identified products qualified under the requirements specified in MIL-M-24041, has been transformed to an equivalent qualification data set (QDS).

Molding and Potting Compound, Chemically Cured, Polyurethane

DLA MS21363 REV B-2007 LT10K307 TO LT10K353 INCL型(磁芯磁套)磁屏蔽超小型固定熔铸射频线圈

Metric equivalents are given for general information only.

COILS, RADIO FREQUENCY, MOLDED, FIXED, MICROMINIATURE, MAGNETICALLY SHIELDED, (FERRITE CORE-FERRITE SLEEVE), TYPES LT10K307 TO LT10K353 INCL.

DLA MS18130 REV E-2007 LT4K074 TO LT4K089型(铁心)超小型固定熔铸射频线圈

These coils are intended to be supported by their leads.

COILS, RADIO FREQUENCY, MOLDED, FIXED, MICROMINIATURE, (IRON CORE), TYPES LT4K074 TO LT4K089

DLA MS21367 REV G-2007 LT10K354 TO LT10K383 INCL型屏蔽(铁心)微型缩影固定包裹射频线圈

The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil.

COIL, RADIO FREQUENCY, ENCAPSULATED, FIXED, MICRO MINIATURE, SHIELDED (IRON CORE), TYPES LT10K354 TO LT10K383 INCL

DLA MS21381 REV E-2007 LT10V174 TO LT10V209 INCL. 和 LT10V247 TO LT10SV258 INCL.型磁屏蔽铁芯微型可变熔铸射频线圈

Dimensions are in inches.

COILS, RADIO FREQUENCY, MOLDED, VARIABLE, SUBMINIATURE, IRON CORE, MAGNETICALLY SHIELDED TYPES LT10V174 TO LT10V209 INCL. AND LT10V247 TO LT10SV258 INCL.

DLA MS21380 REV D-2007 LT4K型(铁心)微型固定熔铸射频线圈

Solderable/weldable lead wire, tinned copper, AWG number 21.

COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE, IRON CORE, TYPES LT4K

DLA MS14052 REV A-2007 LT10K158 TO LT10K168 INCL型(铁心)微型固定熔铸射频线圈

Metric equivalents, in parentheses, are given for general information only.

COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE, (IRON CORE), TYPES LT10K158 TO LT10K168 INCL.

DLA MS14046 REV D-2007 LT10K128 TO LT10K137 型(铁心)超小型固定熔铸射频线圈

Metric equivalents, in parentheses, are given for general information only.

COILS, RADIO FREQUENCY, MOLDED, FIXED, MICROMINIATURE, (IRON CORE) TYPES LT10K128 TO LT10K137

DLA MS14041 REV B-2007 LT10K108 TO LT10K112 INCL型(铁心)微型固定熔铸射频线圈

This specification is approved for use by all Departments and Agencies of the Department of Defense.

COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE, (IRON CORE), TYPES LT10K108 TO LT10K112 INCL.

DLA MS14050 REV A-2007 LT10K153 TO LT10K157 INCL型(铁心)微型固定熔铸射频线圈

Metric equivalents, in parentheses, are given for general information only.

COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE, (IRON CORE), TYPES LT10K153 TO LT10K157 INCL.

DLA MS14043 REV B-2007 LT10K118 TO LT10K122 INCL型(铁心)微型固定熔铸射频线圈

This specification is approved for use by all Departments and Agencies of the Department of Defense.

COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE, (IRON CORE), TYPES LT10K118 TO LT10K122 INCL.

NAVY QPL-AS21608-2007 卷曲式终端有护套的套圈

This list has been prepared for use by or for the Government in the acquisition of products covered by the subject non-Government standard and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest adopted issue of the applicable non-Government standard. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release the manufacturer from compliance with the non-Government standard requirements

FERRULE, SHIELD TERMINATING, CRIMP STYLE [Superseded: NAVY QPL-21608 -13 CANC NOTICE 1, NAVY QPL-21608-13, NAVY QPL-21608-12, NAVY QPL-21608-11, NAVY QPL-21608-10, NAVY QPL-21608-9, NAVY QPL-21608-8, NAVY QPL-21608-7 (3), NAVY QPL-21608-7 (2), NAVY QPL

DLA MS14048 REV A-2007 LT10K143 TO LTI0K147 INCL型(铁心)微型固定熔铸射频线圈

Metric equivalents, in parentheses, are given for general information only.

COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE (IRON CORE), TYPES LT10K143 TO LTI0K147 INCL

DLA MS14049 REV A-2007 LT10K148 TO LT10K152 INCL型(铁心)微型固定熔铸射频线圈

Metric equivalents, in parentheses, are given for general information only.

COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE, (IRON CORE), TYPES LT10K148 TO LT10K152 INCL.

DLA MS18100 REV E-2007 LT4K200 TO LT4K208,LT4K220 和 LT4K221　INCL型(酚醛核心)微型固定熔铸射频线圈

This specification is approved for use by all Departments and Agencies of the Department of Defense.

COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE, (PHENOLIC CORE), TYPES LT4K200 TO LT4K208 INCL. LT4K220 AND LT4K221

DLA MS14040 REV B-2007 LT10K097 TO LT10K107 INCL型(铁心)微型固定熔铸射频线圈

This specification is approved for use by all Departments and Agencies of the Department of Defense.

COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE, (IRON CORE), TYPES LT10K097 TO LT10K107 INCL.