共找到 1885 条与 航空航天制造用材料 相关的标准,共 126 页
This specification covers environmentally hardened pressure gauges that utilize a mechanical elastic element to sense the pressureto provide an analog indication of the pressure on a circular dial or vertical scale, Helical Edgeview Mechanical Pressure Indicator (HEMPI). Depending on case size and design, the pressure gauge may either be stem or flush/surface mounted.
GAUGE, PRESSURE, DIAL INDICATING
MIL-STD-3001-5, dated 15 May 2001, has been reviewed and determined to be valid for use in acquisition.
DIGITAL TECHNICAL INFORMATION FOR MULTI-OUTPUT PRESENTATION OF TECHNICAL MANUALS AIRCRAFT WIRING INFORMATION (PART 5 OF 8 PARTS)
This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN
MICROCIRCUIT, MEMORY, DIGITAL, CMOS 256K X 1-BIT SERIAL CONFIGURATION PROM, MONOLITHIC SILICON
This specification covers one type of gas-particulate filter set rated at 200 standard cubic feet per minute(scfm) for use in Collective Protection Equipment(CPE)(see 6.1).
FILTER SET, GAS-PARTICULATE, 200 CFM, M98
This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN.
MICROCIRCUIT, MEMORY, DIGITAL, RADIATION-HARDENED, CMOS, 128K X 8 STATIC RAM, MONOLITHIC SILICON
This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M)and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels is reflected in the PIN.
MICROCIRCUIT, LINEAR, LVDS QUAD CMOS DIFFERENTIAL LINE RECEIVER, MONOLITHIC SILICON
This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN).
MICROCIRCUIT, MEMORY, DIGITAL, CMOS, RADIATION-HARDENED, 8K X 8-BIT PROM, MONOLITHIC SILICON
This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN.
MICROCIRCUIT, DIGITAL, RADIATION HARDENED, ADVANCED CMOS, QUADRUPLE S-R LATCH, MONOLITHIC SILICON
This drawing documents five product assurance classes as defined in paragraph 1.2.3 and MIL-PRF-38534. A choice of case outlines and lead finishes which are available and are reflected in the Part or Identifying Number (PIN)
MICROCIRCUIT, HYBRID, MEMORY, DIGITAL, 512K X 32-BIT, STATIC RANDOM ACCESS MEMORY, CMOS
This handbook provides guidelines for requirements to qualify an armament system for use on-board a U.S. Army air vehicle. Air vehicles include rotorcraft, fixed-wing aircraft, and unmanned aerial vehicles(UAV).
ARMAMENT AIRWORTHINESS QUALIFICATION FOR U.S. ARMY AIRCRAFT
The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil.
CONTROL PANEL ASSEMBLY FOR PORTABLE HELIPORT ELECTRIC LIGHTING
The activities listed above were interested in this document as of the date of this document. Since organizations and esponsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil.
LIGHT FIXED AND ROTARY-WING AIRCRAFT CRASH RESISTANCE [Superseded By: AIR FORCE JSSG 2010-7 VALID NOTICE 1, AIR FORCE JSSG 2010-7]
Provided by IHSNot for ResaleNo reproduction or networking permitted without license from HIS
PEN, ROLLER-BALL/ROLLER-POINT, GEL INK& REFILLS (RETRACTABLE/REFILLABLE/NON-REFILLABLE)
The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil
PUNCHING MACHINE, METAL, TURRET TYPE, HAND OPERATED
This specification covers three grades and four unit quantities of methanol.
METHANOL (METHYL ALCOHOL)
The activities listed above were interested in this document as of the date of this document. Sinceorganizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil.
CLAMP ASSEMBLY (SYNCHRO)
This commercial item description (CID) covers shrinking and stretching machines for forming sheet metal, angles, flatbars, and plates with equipment and accessories specified herein. These machines are used by aircraft manufacturers, fabricators, and the sheet metal trade to shrink and stretch flats, angles, plates, and extrusions for forming, fitting, and removing wrinkles.
SHRINKING AND STRETCHING MACHINE, SHEET METAL
MIL-PRF-32217 was approved for use by the Department of Defense on 18 September 2006, not 27 July 2006 as was originally indicated on the specification.
SCALE PREVENTION IN SEWAGE COLLECTION, HOLDING AND TRANSFER (CHT) AND VACUUM CHT (VCHT) PIPING SYSTEMS FOR USE ON NAVAL SURFACE SHIPS
This military standard is approved for use by Department of the Air Force, and is available for use by all departments and agencies of the Department of Defense.
METHOD OF DIMENSIONING AND DETERMINING CLEARANCE FOR AIRCRAFT TIRES AND RIMS
The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST database at http://assist.daps.dla.mil/.
TURNBUCKLES, POSITIVE SAFETYING, GENERAL SPECIFICATION FOR
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号