550 标准查询与下载

DS 2062:1991 刻螺纹前使用的钻

Denne standard specificerer borstørrelser til anvendelse før gevindskæring og -formning af parallelt møtrikgevind med normal indskruningslængde. Bordiameteren ved skåret ge-vind er ca. lig med den nominelle diameter minus stigningen. Bordiameter ved formet gevind er ca. lig den nominelle diame-ter minus den halve stigning. Borstørrelser er anført for følgende gevind: 1) ISO metrisk gevind (grov og fin stigning): Tabel 1 og 2. 2) ISO inch gevind (UNC og UNF): Tabel 3 og 4. 3) ISO rørgevind: Tabel 5, 6 og 7. 4) Panserrørgevind: Tabel 8. Standarden specificerer metriske bordiametre, som med und-tagelse af 4 størrelser er udvalgt af ISO 235, og dimensioner-ne skal fremover anses som anbefalede dimensioner til dette formål.

Drills for use prior to tapping screw threads

DS/ISO 9283:1991 操纵型工业机器人.性能规范和有磁试验方法

This International Standard describes methods of specifying and testing the following performance characteristics of manipulating industrial robots: — unidirectional pose accuracy and pose repeat-ability; — multi-directional pose accuracy variation; — distance accuracy and distance repeatability; — pose stabilization time; — pose overshoot; — drift of pose characteristics; — path accuracy and path repeatability; — cornering deviations; — path velocity characteristics; — minimum positioning time; — static compliance. This International Standard does not specify which of the above performance characteristics are to be chosen for testing a particular robot. The tests de-scribed in this International Standard are primarily intended for developing and verifying individual ro-bot specifications, but can also be used for such purposes as prototype testing, type testing or ac-ceptance testing. This International Standard applies to all manipulating industrial robots as defined in ISO/TR 8373. However, for the purpose of this International Stan- dard the term "robot" means manipulating industrial robot.

Manipulating industrial robots. Performance criteria and related test methods

DS/ISO 9787:1991 操纵型工业机器人.坐标系和运动

This International Standard defines and specifies three robot coordinate systems; it also gives the axis nomenclature. It is intended to aid in robot alignment, testing, and programming. This International Standard applies to all manipulating industrial robots as defmed in ISO/TR 8373.

Manipulating industrial robots. Coordinate systems and motions

DS/ISO 9946:1991 操纵型工业机器人.特性表示方法

This International Standard specifies requirements for how characteristics of robots shall be presented by the manufacturer.

Manipulating industrial robots. Presentation of characteristics

DS 58:1990 技术制图．表面结构表示法

Technical drawings. Method of indicating surface texture

DS/ISO 2562:1989 机床结构的组合件. 滑动组件

This International Standard specifies certain dimensions relating to the interchangeability of slide units used in special machines constructed from modular units.

Modular units for machine tool construction. Slide units

DS/ISO 2632-1:1989 粗糙度对比样块.第1部分:车、磨、镗、铣、成形加工和刨

Denne del af DS/ISO 2632 fastl?gger karakteristika for ruhedssammenligningsoverflader for drejede, slebne, borede, fr?sede, shapede og h?vlede overflader, som er beregnet til ber?rings- og visuel sammenligning med arbejdsemners over-flader med tilsvarende overfladem?nster produceret med de tilsvarende metoder. Standarden kompletteres af DS/ISO 2632-2 og DS/ISO 2632-3.

Roughness comparison specimens. Part 1: Turned, ground, bored, milled, shaped and planed

DS/ISO 2632-2:1989 粗糙度对比样块.第2部分:电火花腐蚀、喷丸清理、喷砂清理和抛光

Denne del af DS/ISO 2632 fastl?gger karakteristika for ruhedssammenligningsoverflader for gnistbearbejdede, sandbl?ste og polerede overflader, som er beregnet til ber?ringsog visuel sammenligning med arbejdsemners overflader med tilsvarende overfladem?nster produceret med de tilsvarende metoder. Standarden kompletteres af DS/ISO 2632-1 og DS/ISO 2632-3.

Roughness comparison specimens. Part 2: Spark-eroded, shot-blasted and grit-blasted, and polished

DS/ISO 2727:1989 机床结构的组合件. 主轴箱

This International Standard specifies certain dimensions relating to the interchangeability of headstocks used in special purpose machines constructed from modular units.

Modular units for machine tool construction. Headstocks

DS/ISO 2769:1989 机床结构的组合件. 滑动组件的翼板座

This International Standard specifies certain dimensions relating to the interchangeability of wing bases for slide units used in special machines constructed from modular units.

Modular units for machine tool construction. Wing bases for slideunits

DS/ISO 2891:1989 机床结构的组合件. 中心座和立柱

This International Standard specifies certain dimensions relating to the interchangeability of centre bases and columns used in special purpose machines constructed from modular units.

Modular units for machine tool construction. Centre bases and columns

DS/ISO 2905:1989 机床结构的组合件. 多轴主轴箱的轴头和可调节的紧固机构

This International Standard specifies dimensions for spindle noses for use with adjustable adaptors and quick-change adaptors used in multi-spindle heads. It specifies requirements for three types of adjustable adaptors to fit taper shank drills, reamers and spot-facing cutters, used in multi-spindle heads.

Modular units for machine tool construction. Spindle noses and adjustable adaptors for multi-spindle heads

DS/ISO 2912:1989 机床结构的组合件. 多轴主轴箱和传动输入轴的尺寸

This International Standard specifies a range of basic dimensions for multi-spindle head casings and also gives dimensions for the interchangeability of multi-spindle head input drive shafts with motor coupling.

Modular units for machine tool construction. Multi-spindle heads. Casing and input drive shaft dimensions

DS/ISO 2934:1989 机床结构的组合件

This International Standard specifies certain dimensions relating to the interchangeability of wing bases for columns used in special purpose machines constructed from modular units.

Modular units for machine tool construction. Wing base for columns

DS/ISO 299:1989 机床工作台.T形槽和 T型螺钉

This International Standard specifies, in millimetres, the dimensions and spacing of T-slots for machine tool tables. It also specifies the metric dimensions of bolts to be used in these slots.

Machine tool tables. T-slots and corresponding bolts

DS/ISO 213:1989 机床. 车刀架. 装刀部位的总高度

This International Standard laYs down overall internal heights of lathe tool posts, from the horizontal level of the lathe axis.

Machine tools. Lathe tool posts. Overall internal height

DS/ISO 702-2:1989 机床. 主轴头和卡盘. 互换尺寸. 第 2部分: 凸轮锁紧型

This International Standard specifies the sizes for interchangeability of Camlock-type lathe spindle noses and corresponding face piates. NOTE — The types "A" and "bayonet" are dealt with in parts I and III respectively.

Machine tools. Spindle noses and face plates. Sizes for interchangeability. Part II: Camlock type

DS/ISO 702-3:1989 机床. 主轴头和卡盘. 互换尺寸. 第 3部分: 卡口型

This International Standard specifies the sizes for interchangeability of bayonet-type lathe spindle noses and corresponding face piates. NOTE — The types "A" and "Camlock" are dealt with in parts I and II respectively.

Machine tools. Spindle noses and face plates. Sizes for interchangeability. Part III: Bayonet type

DS/ISO 841:1989 机床的数字控制. 轴线和运动专用术语

1 Denne standard definerer ben?vnelse af koordinatsy-stemer og bev?gelsesakser ved numerisk styrede maskiner. Den har til hensigt at forenkle programmeringsarbejdet, at g?re programmeringen entydig samt at muligg?re flytning af program data mellem flere maskiner. 2 Denne standard kan anvendes ved alle typer numerisk styrede maskiner. NOTE — Af hensyn til forenkling har tekst og tegninger i denne stan-dard relation til bearbejdningsmaskiner, men standardens anvisnin-ger kan anvendes ved alle former for numerisk styret produktionsud-styr.

Numerical control of machines. Axis and motion nomenclature

DS/ISO 9409-1:1989 操纵工业机器人.机械界面.第1部分:圆形(A式)

This part of ISO 9409 defines the main dimensions, designation and marking for the circular mechanical interface (form A). It is intended to ensure the exchangeability and orientation of hand-mounted end effectors. This part of ISO 9409 does not define other requirements of the end effector coupling device. ISO 9409-1 does not contain any correlation of load-carrying ranges. The mechanical interface specified in this part of ISO 9409 will also find applications in simple handling systems which are not covered by the definition of manipulating industrial robots, e.g. pick and place or master-slave units.

Manipulating industrial robots. Mechanical interfaces. Part 1: Circular form (form A)