93.080.40 街道照明和有关设备 标准查询与下载

T/QGCML 3273-2024 LED路灯

本文件规定了LED路灯的要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于LED路灯的生产与检验。

LED street light

DB3401/T 310.3-2023 市政设施编码及户外标识 第3部分：照明设施

Municipal facilities coding and outdoor markings Part 3: Lighting facilities

KS A 3701-2023 道路照明

Lighting for roads

T/QGCML 2639-2023 便于维修的共享单车停放点用照明装置

本文件规定了便于维修的共享单车停放点用照明装置的术语和定义、结构及原理、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于便于维修的共享单车停放点用照明装置的生产及检验。

Lighting device for shared bicycle parking spots that is easy to maintain

T/TZAS 005-2023 城区道路绿色照明维护规范

4　基本要求 5　维护周期 6　一般规定 7　维护台账 8　安全作业 9　维护评价考核 10　服务回访

Green lighting maintenance specifications for urban roads

T/CMEA 44-2023 道路照明灯杆检测鉴定技术规范

主要技术内容是：总则、术语和符号、基本规定、灯杆基础及周边土体检测、灯杆结构检测、电气系统检测、附属设施检测及灯杆承载力验算、灯杆安全性鉴定、检测鉴定报告。

Technical code for inspection and appraisal of lamp poles

T/QGCML 716-2023 智慧控制路灯杆

本标准规定了智慧控制路灯杆的术语定义、总体要求、移动通信基站、系统供配电、施工和验收。 本标准适用于智慧控制路灯杆的应用。（除应符合本标准外，尚应符合国家现行有关标准的规定。）

Intelligent control of street light poles

DB3301/T 0402-2023 智慧多功能灯杆建设与管理规范

本文件规定了智慧多功能灯杆的基本要求、设计要求、施工与验收要求、运行管理与维护要求等内容。 本文件适用于城市道路、广场、景区、园区和社区等场景下的智慧多功能灯杆的建设和运行管理。高速公路等场景下的智慧多功能灯杆可参照执行。

Specifications for construction and management of smart multifunctional light poles

T/CMEA 31-2022 多功能灯杆技术条件

本文件规定了多功能灯杆的产品分类和型号、一般要求、质量要求、试验方法、检验规则，以及标志、包装、运输和贮存等。

Technical requirements for multifunctional lamp pole

T/ZS 0397.11-2022 城市街区微改造技术指南 第11部分：照明

前言　 1  范围　 2  规范性引用文件　 3  术语和定义　 4  基本要求　 5  检查与策划　 5.1  检查　 5.2  策划　 6  智慧灯杆　 6.1  一般要求　 6.2  杆体　 6.3  挂载设备　 6.4  杆体综合仓　 7  应急照明　 8  智能控制　

Technical guide for micro modification of city blocks Part 11： Lighting

T/CAICI 47-2022 多功能智慧杆智能网关技术规范

本规范规定了多功能智能杆系统智能网关的硬件和软件技术规范，涉及天基物联网卫星技术规范和工业互联网标识解析及应用规范，适用于新建多功能智能杆系统智能网关部分的设计、研发、管理与维护，也可指导智能网关设备厂家硬件与软件研发工作。

Multi-functional Smart Pole Smart Gateway Technical Specifications

JT/T 609-2022 公路隧道照明灯具

本标准适用于公路隧道照明灯具的生产、检验和使用。

Highway tunnel lighting fixtures

22/30461774 DC PD 6547. BS EN 40-3-1 和 BS EN 40-3-3 使用指南

PD 6547. Guidance on the use of BS EN 40-3-1 and BS EN 40-3-3

ASTM E2540-16(2022) 在0.5度观察角下使用便携式反光仪测量反光标志的标准试验方法

1.1 This test method covers measurement of the retroreflective properties of sign materials such as traffic signs and symbols (vertical surfaces) using a portable retroreflectometer that can be used in the field. The portable retroreflectometer is a hand-held instrument with a defined standard geometry that can be placed in contact with sign material to measure the retroreflection in a standard geometry. The measurements can be compared to minimum requirements to determine the need for replacement. Entrance and observation angles specified in this test method are those used currently in the United States and may differ from the angles used elsewhere in the world. 1.2 This test method is intended to be used for the field measurement of traffic signs but may be used to measure the performance of materials before placing the sign in the field or before placing the sign material on the sign face. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.5 Degree Observation Angle

DB5101/T 142-2021 成都多功能灯杆设置安装技术规范

Technical specifications for installation and installation of multifunctional light poles in Chengdu

DB5101/T 141-2021 成都市道路照明维护管理规范

Chengdu Road Lighting Maintenance and Management Regulations

T/CMEA 21-2021 城市道路照明设施运行维护技术标准

主要内容包括：总则、术语、基本规定、运维内容、道路照明设施运维要求、安全管理、资料管理、运维考核、移交验收。

Technical standard for operation and maintenance of urban road lighting facilities

DIN 13201-1:2021 道路照明 第1部分：照明等级的选择

This document specifies the lighting classes M, C and P set out in EN 13201-2 and gives guidelines on the application of these classes. For this purpose, parameters are given that are relevant to the lighting of outdoor traffic areas. These are usually provided by the competent a

Road lighting - Part 1: Selection of lighting classes

IESNA LP-12-2021 照明实践：物联网照明

LIGHTING PRACTICE: IOT CONNECTED LIGHTING

UNI 10819-2021 光与照明 室外照明应用 评价向上散射光通量的照明数量和计算程序

Light and lighting - outdoor lighting application - lighting quantities and calculation procedures for the evaluation of the upward scattered luminous flux