ISO/TR 13530-1997
水质 水质分析的质量控制指南
Water quality - Guide to analytical quality control for water analysis
ISO/TR 13530-1997 发布历史
This Technical Report (type 2) is a guide with the objective of providing detailed and comprehensive guidance on a coordinated programme of within-laboratory and between-laboratory quality control for ensuring the achievement of results of adequate and specified accuracy in the analysis of waters and associated materials. This Technical Report and its annexes are applicable to the chemical and physicochemical analysis of natural waters (including sea water), waste water, raw water intended for the production of potable water, and potable water. It is not intended for application to the analysis of sludges and sediments (although many of its general principles are applicable to such analysis) and it does not address the biological or microbiological examination of water. Whilst sampling is an important aspect, this is only briefly considered. Analytical quality control as described in this Technical Report is intended for application to water analysis carried out within a quality assurance programme. This Technical Report does not address the detailed requirements of quality assurance for water analysis. The recommendations of this Technical Report are in agreement with the recommendations of established quality assurance documentation (for example ISO Guide 25 and EN 45001). A discussion of quality systems in water analysis is provided in clause 4 to set in context the recommendations on quality control. This Technical Report is applicable to the use of all analytical methods within its field of application, although its detailed recommendations may require interpretation and adaptation to deal with certain types of determinand (for example non-specific determinands such as suspended solids or biochemical oxygen demand). In the event of any disparity between the recommendations of this Technical Report and the requirements of a standard method of analysis, the requirements of the method should prevail. The basis of the Technical Report is to ensure the achievement of results of adequate accuracy by adherence to the sequential stages of analytical quality control shown in figure 1.
ISO/TR 13530-1997由国际标准化组织 IX-ISO 发布于 1997-09。
ISO/TR 13530-1997 在中国标准分类中归属于: Z16 水环境有毒害物质分析方法，在国际标准分类中归属于: 13.060.45 水检验综合。
ISO/TR 13530-1997的历代版本如下：
- 1997年09月 ISO/TR 13530-1997 水质 水质分析的质量控制指南
ISO/TR 13530-1997 水质 水质分析的质量控制指南 于 2009-03-01 变更为 ISO/TS 13530-2009 水质.化学和物理化学水分析用分析质量控制指南。
- 标准号
- ISO/TR 13530-1997
- 发布日期
- 1997年09月
- 实施日期
- 废止日期
- 无
- 中国标准分类号
- Z16
- 国际标准分类号
- 13.060.45
- 发布单位
- IX-ISO
- 代替标准
- ISO/TS 13530-2009
- 适用范围
- This Technical Report (type 2) is a guide with the objective of providing detailed and comprehensive guidance on a coordinated programme of within-laboratory and between-laboratory quality control for ensuring the achievement of results of adequate and specified accuracy in the analysis of waters and associated materials. This Technical Report and its annexes are applicable to the chemical and physicochemical analysis of natural waters (including sea water), waste water, raw water intended for the production of potable water, and potable water. It is not intended for application to the analysis of sludges and sediments (although many of its general principles are applicable to such analysis) and it does not address the biological or microbiological examination of water. Whilst sampling is an important aspect, this is only briefly considered. Analytical quality control as described in this Technical Report is intended for application to water analysis carried out within a quality assurance programme. This Technical Report does not address the detailed requirements of quality assurance for water analysis. The recommendations of this Technical Report are in agreement with the recommendations of established quality assurance documentation (for example ISO Guide 25 and EN 45001). A discussion of quality systems in water analysis is provided in clause 4 to set in context the recommendations on quality control. This Technical Report is applicable to the use of all analytical methods within its field of application, although its detailed recommendations may require interpretation and adaptation to deal with certain types of determinand (for example non-specific determinands such as suspended solids or biochemical oxygen demand). In the event of any disparity between the recommendations of this Technical Report and the requirements of a standard method of analysis, the requirements of the method should prevail. The basis of the Technical Report is to ensure the achievement of results of adequate accuracy by adherence to the sequential stages of analytical quality control shown in figure 1.