1.1 This part of IEC 61508 contains an overview of various safety techniques and measures relevant to IEC 61508-2 and IEC 61508-3. The references should be considered as basic references to methods and tools or as examples, and may not represent the state of the art. 1.2 IEC 61508-1, IEC 61598-2, IEC 61508-3 and IEC 61508-4 are basic safety publications, although this status does not apply in the context of low complexity E/E/PE safety-related systems (see 3.4.3 of IEC 61508-4). As basic safety publications, they are intended for use by technical committees in the preparation of standards in accordance with the principles contained in IEC Guide 104 and ISO/IEC Guide 51. IEC 61508-1, IEC 61508-2, IEC 61508-3 and IEC 61508-4 are also intended for use as stand-alone publications. The horizontal safety function of this international standard does not apply to medical equipment in compliance with the IEC 60601 series. 1.3 One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. In this context, the requirements, test methods or test conditions of this basic safety publication will not apply unless specifically referred to or included in the publications prepared by those technical committees. 1.4 Figure 1 shows the overall framework for parts 1 to 7 of IEC 61508 and indicates the role that IEC 61508-7 plays in the achievement of functional safety for E/E/PE safety-related systems.
IEC 61508-7:2010由国际电工委员会 IX-IEC 发布于 2010-04。
IEC 61508-7:2010 在中国标准分类中归属于: N18 工业控制机与计算技术应用装置,在国际标准分类中归属于: 13.320 报警和警告系统,25.040.40 工业过程的测量和控制。
”、“9.2 功能接地装置”、“9.3 PCB板上铜箔条作保护接地的灯控制装置”、“9.4 内装式灯控制装置的接地”和“9.5 通过独立式灯控制装置的接地”五部分进行描述;5在第10章“防止意外接触带电部件的措施”中新增了“10.3”和“10.4”对提供SELV的控制装置进行了规定;6在第11章“防潮和绝缘”中删除了部分测试部位和方法要求,并重新进行了编写;7在第12章“电气强度”中表2,对原标准中表...
范围 GB/T 22578 的本部分规定了电气绝缘系统热评定的密封管试验程序,提出了含有固体和液体组件的电气绝缘系统使用的材料的热分级方法。规定了以纤维素纸和矿物绝缘油为组成的基准系统与由任何固体和液体绝缘材料组成的待评系统进行对比老化的试验方法。 本部分适用于与电压等级无关的以热应力为主要老化因子的包含液体相固体组件的电气绝缘系统。尤其适用于被浸变压器的绝缘系统。 ...
申报产品如有报警、信息追溯等特殊功能的也应一并注明。 8.2.安全指标 (1)电气安全要求:应符合GB 4793.1—2007、IEC 61010—2—040—2015的要求,如果多个标准对某项要求不一致,应按最严格的标准要求施行。 (2)电磁兼容要求:应符合GB/T 18268.1—2010的要求。...
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号